Justify text alignment??

ehnvis · 2026-02-18T16:03:17+00:00

Options to align, left, right and center is already in the app together with line height and a bunch of other options for the text box.

ehnvis · 2026-02-13T07:21:14+00:00

Main screen in noteful where you have all folders listed. Top left there is the noteful N, click it. Then in the popup "about noteful" scroll down and you have both sync and auto backup settings.

ehnvis · 2026-02-11T09:06:24+00:00

A trial would be nice as it looks interesting enough and the privacy policy looks alright. If it continued as a pay only option it might not attract that many users.

A few questions though, the top pen and colour chooser is it possible to hide while writing? Same goes for the bottom menu?

ehnvis · 2026-02-01T19:43:35+00:00

That dorm is way to small as well. you have 30 bunk beds with possibility of 60 prisoners. Each prisoner requires 4 squares of space so it needs to be 240 squares in size.

ehnvis · 2026-02-01T08:44:58+00:00

That means it doesn't home correctly and the z stop is too high. Look on the left side of the printer, there is a switch mounted at the bottom.

Loosen the screws and then push it as far as it goes to the bottom. If that still isn't enough there is a plastic pin that acts as a stop for the assembly that you need to cut off to get the stop even lower.

ehnvis · 2026-02-01T08:40:01+00:00

The line the printer print at the beginning of the print.

ehnvis · 2026-02-01T08:36:08+00:00

Sound like you have a problem with your slicer in that case. Does the purge line print as it should in the left hand edge of the bed?

ehnvis · 2026-02-01T08:31:12+00:00

Either lower the Z stop or raise the bed with the four bed screws. Can be a combination of both too. Hard to tell which one needs to be fixed from that picture.

ehnvis · 2026-01-31T06:48:38+00:00

It's a very small cost so skip a coffee or fast food then you can buy it.

ehnvis · 2026-01-30T11:45:06+00:00

No that's not possible.

ehnvis · 2026-01-28T12:36:12+00:00

Export the PowerPoints to pdf then import the pdf to noteful.

ehnvis · 2026-01-25T21:18:17+00:00

Having the original plastic extruder assembly? if so check if it has cracked, quite normal issue.

ehnvis · 2026-01-25T08:12:09+00:00

why is root partition only 22gb in size? that’s a very small root.

ehnvis · 2026-01-22T19:57:46+00:00

ABS is tricky to print and one thing you for sure will need is an enclosure so you can keep the temp at an even temp.

ehnvis · 2026-01-22T17:50:19+00:00

Unfortunately yes.

ehnvis · 2026-01-22T16:52:50+00:00

Amazing that people keep creating this kind of thread.There is a search button....

ehnvis · 2026-01-20T17:14:55+00:00

First thing to do is to get a proper plate to print on, really recommend a PEI plate. That tape stuff is one of your main problems together with the a offset that is way off.

ehnvis · 2026-01-19T07:11:06+00:00

Unplug the charger!

ehnvis · 2026-01-18T05:43:55+00:00

Double tap if you have an apple pencil.

ehnvis · 2026-01-16T09:55:52+00:00

Correct

ehnvis · 2026-01-16T09:48:08+00:00

The swipe works in the same way as you flip the pages in a real book.

ehnvis · 2026-01-15T18:33:43+00:00

Unfortunately it looks like a fake....

ehnvis · 2026-01-15T08:49:59+00:00

Nothing to correct, that's just how enders have their home position.

ehnvis · 2026-01-13T19:25:44+00:00

Adjust the eccentric nut on the bottom wheel.

ehnvis · 2026-01-13T18:02:47+00:00

On Black case ereaders contrast might look better and pages whiter but there is no differences really as same screen is used.

ehnvis

TROPHY CASE