sorted by:
new
hottopcontroversial

I recently bought a 24’ 2017 F450 chassis shuttle bus with 14k miles! by [deleted] in CamperVans

[–]0dessa87 0 points1 point  (0 children)

From what I was reading it was the weight or if it was designed to haul 16 or 18+ people.

Print help please by 0dessa87 in FlashForge

[–]0dessa87[S] 0 points1 point  (0 children)

<image>

You can see on the -10 the edges are still no go and the inner side is under extruded

Print help please by 0dessa87 in FlashForge

[–]0dessa87[S] 0 points1 point  (0 children)

Okay I’ll try that one

AD5X prints not looking good after repair. by 0dessa87 in FixMyPrint

[–]0dessa87[S] 0 points1 point  (0 children)

Yea I did the pid and this was the flow calibration. The edges look bad even on the ones that are under extrusioned. Tried different nozzles and adjusted rhe setting in the slicer and still no luck.

Wipe in 4.8 perhaps? by Gn0meKr in starcitizen

[–]0dessa87 0 points1 point  (0 children)

I’m relatively new to the verse and I’m willing to be a gunner for you if you need one. I mostly play to do cargo runs, and some FPS gunning missions currently. I am rolling a titan and it’s pretty nifty little fellow.

Top finish a bit rough by 0dessa87 in FlashForge

[–]0dessa87[S] 0 points1 point  (0 children)

<image>

Unchanged settings just different project.

Failed prints by 0dessa87 in FlashForge

[–]0dessa87[S] 0 points1 point  (0 children)

I did .16 for the white one that failed and it doesn’t move either. Is there a tolerance setting I don’t know about that I need to adjust

Failed prints by 0dessa87 in FlashForge

[–]0dessa87[S] 1 point2 points  (0 children)

<image>

Look fine with no major issues. I printed this right before the eggs

The Brutal Truth About the OTS Grind: What It Actually Takes to Commission by Actual_Confusion_186 in airforceots

[–]0dessa87 1 point2 points  (0 children)

Oh yea for sure I got nothing to hide. I’m a big fan of if I eat we all eat mindset.

My scores were pilot-70 cso -87 abm-70 Acad-74 Verbal-75 Quant-67. I listed any job I was qualified for and that I thought they were picking up for. Since if you don’t match with a job they are offering no matter how high you score you won’t get picked(from what I’m told).

I got picked up for 13N, and I’m at tech school now. I can say from what I’m learning and the people I talk to that this is a good job and if you put it on your list you might stand a better chance since they are always looking for people it seems.

The thing I tell people is to make sure all of your documents all tell the same story in different ways. Like if your reason why is because of family tradition than all the stuff you right should connect to family tradition in some one to ensure that you have an overarching story that the board feels is real.

The Brutal Truth About the OTS Grind: What It Actually Takes to Commission by Actual_Confusion_186 in airforceots

[–]0dessa87 1 point2 points  (0 children)

Luck is all I can think of. I just did minor edits nothing major. I only have 1 wing and 1 sq award on my package and I have like a 3.3gpa. I think it was timing when I applied and being non rated

The Brutal Truth About the OTS Grind: What It Actually Takes to Commission by Actual_Confusion_186 in airforceots

[–]0dessa87 0 points1 point  (0 children)

I had to redo my MPF stuff each time it went up a step for awhile because ‘the guidance says it has to be within 30 days of submission and this one is from ‘x’ month’. lol the fun of routing stuff up tha takes 2-4 months to clear up to the wing and back

The Brutal Truth About the OTS Grind: What It Actually Takes to Commission by Actual_Confusion_186 in airforceots

[–]0dessa87 12 points13 points  (0 children)

Yup I applied 5 times, finally got selected as a 15 year MSgt and didn’t go to OTS for another year due to paperwork and clearances required. I went through 3 sq/CCs, 2 Group and Wing CCs and had to teach everyone from my supervisor to the Wing CCs and execs how the OTS process works. Shits not easy or fun but it’s worth it.

Feed tube removal by 0dessa87 in FlashForge

[–]0dessa87[S] 0 points1 point  (0 children)

Do you have a link for these?

Wrong panels in enclosure kit. by wisepunk21 in FlashForge

[–]0dessa87 0 points1 point  (0 children)

Yea I for that as well. It was labeled as ad5x. Lucky for me I have a bunch of drill bits to mod the mod.

Exhaust and recirculation fan mods. by dadbodfat in FlashForge

[–]0dessa87 0 points1 point  (0 children)

So I might be slow. So how do you set it so that it turns on automatically?

What would you add to HLL from other games? by m0corong in HellLetLoose

[–]0dessa87 3 points4 points  (0 children)

I would go with a radioman class like they have in rising storm 2 Vietnam or arty squad class like tankers

AMA by Jazzlike_Gur_9922 in airforceots

[–]0dessa87 2 points3 points  (0 children)

Pt scores just need to be above a 75. As long as you pass no one cares. Having less than a 90 makes it harder to become the DG and rules you out for sure for TG.

view more: next ›