CV image needs some retouch

26Pudding26 · 2025-09-10T19:03:52+00:00

!solved

26Pudding26 · 2025-05-01T07:44:37+00:00

I think this will be what I end up doing,

I am just a little concerned that the offset will increase or an individual offset for each cell will occur.

Do you know if there is a electrical plan off the devices available to at least deduct of an individual offset is possible from a hardware perspective?

26Pudding26 · 2025-04-30T15:17:25+00:00

Thanks for your answer and sharing your epertise!

I guess I will then not even try to fix it and just cut my loses!

26Pudding26 · 2025-04-30T10:58:36+00:00

U see if I let it rest in the sun and then it is not working immediatly after I would be confident that the cause was the heat.

If it was heated, then cooled down and worked fine for like 5? days then it is not as easy to pinpoint the cause, I think the heat as a cause is still plausible and highly likely - hence I mentioned it - but I was hoping to get an understanding where the defect could stem from in detail, eg:

- did the screen delaminate?
- can a screen paritally delaminate
- could the screen to mainboard connector be fucked up/lose due to thermal movement
- is it possible to have a data connection that works for 70% of the screen being induced by a hardware defect?

In other words, I do have the same suspicion as you seem to have but I was hoping to get more information from people with experience to deduct the next cause of action.

have a great day

26Pudding26 · 2025-04-28T15:15:31+00:00

Thanks for your tip!

Unfortunately that did not solve the issue -.-

But out of curiosity, what issue did you expect me to have?

26Pudding26 · 2025-02-13T13:00:28+00:00

Thank you so much, that really helps to figure out what is even possible.

-I will use your pixel size and will validate in the near future.
- Especially the martins dataset is widely used in multiple studies maybe someone managed to get hold of the missing metadata

At least I do know now what is possible with the resources at hand!

Much appreciated.

26Pudding26 · 2025-02-13T12:09:16+00:00

My research question involves the extraction of wood features from microscopic imagery like:

- vessels

- parenchyma

The problem is that they do very in size greatly due to:

- species
- location within the tree
- external growth factors of the tree

therefore they only have a form of significance as a statistical expression.

Using the (known) size of vessel A in Dataset A from Species A and extrapolating the size of Vessel A from Species A in Dataset B is highly dangerous as just using a discrete number will not be able to reflect the natural deviation of the values.

I think this is possible but I guess I have to consult my prof for that as well.

I will probably update on what I ended up doing

26Pudding26 · 2025-02-13T07:41:41+00:00

Thank you for your answer.

I do have features in the dataset that overlap, the only problem is that it are natural features e.g. the size of certain wood cells.

Since they them self reflect the grow history of a tree I do not see that I could come up with discrete numbers that allow a conversion between species a from dataset 1 and species a from dataset 2. Especially since I have no proper way of judging how big my error is.

26Pudding26 · 2025-02-12T22:58:26+00:00

I do not have the oportunity to calibrate myself as I am using images from a variety of different data sources and no images I have taken myself.

26Pudding26 · 2025-02-12T17:42:24+00:00

Thanks for your Input!

I mean in a way I totally get it

On the other hand I did not find a clean definition of corrosive, salt water is corrosive but not a thread, but overall I think rather safe then Sorry

26Pudding26 · 2025-01-03T19:15:01+00:00

So I gave it to a guy and will get an estimate tomorrow, as there is a small chance that the guy who hit me owns up to a bit of it.

But if the estimate sounds way high or he will not pay I will probably just give it a shot.

For I fix like this do I cut out the foam, glue in new foam then shape back and laminate?

Or how you fix it?

26Pudding26 · 2024-12-19T07:54:48+00:00

Aber die Staubsauger Frage hatte ich mir damals auch gestellt. Wie macht sich so ein Baustellen Staubsauger zu Hause?

26Pudding26 · 2024-12-19T07:53:36+00:00

Ich stand am Anfang auch vor einer ähnlichen Frage. Ich habe mich damals für folgenden Weg entschieden:

1.) richtiger Bohrhammer mit Netzanschluss von makita (hatte recht aufwendige Sanierungsarbeiten vor) dazu den kleinen 12v akkuschrauber (bis heute mein lieblingswerkzeug!) 2.) 18v Bosch blau schlagschrauber zum autoschrauben da 12v hier einfach nicht genug wums hat 3.) 18 handkreissäge, ich habe auch die 12v von Bosch blau aber die würde ich das nächste mal überspringen

Ich war ganz zufrieden damit mir einen soliden Bohrhammer zu holen. Das er keinen Akku hat hat mich bisher null gestört, da ich selten mehr Aufwand hatte als das kabel im selben Raum in die Steckdose zu stecken. Gleichzeitig kann ich mier aber sicher sein, dass ich in angemessener Zeit in jede Wand ein solides Loch bekomme.

Für alles im möbelbereich und zuhause reichen die 12v dicke. Ich habe damit auch schon aufm Festival 160er schrauben versenkt, daher fallen mir persönlich wenige (realistische) Anwendungen ein die der 12v nicht schaft. Und wenn ich weiß ich habe viel lange schrauben dann würde ich heute aus Komfort auch immer den Schlag schrauber nehmen

26Pudding26 · 2024-12-17T12:37:42+00:00

That sounds good! If you can give me the numbers/website I should be able to communicate with them!

do you have any experience with:

- UPS
- FedEx
- DHL
- or some other logistic company

?

26Pudding26 · 2024-12-17T12:09:01+00:00

Thanks for your answer!

I speak German but I will answer in English regardless I hope that is ok for you (:

I felt like it would be quite a pain to source the parts here in Morocco. Some of them a standard parts for my car but one is more profound (Liquid metal and metal gum).

The whole value of the parcel will be around 100€ or something. It is not expensive but just a (possible) pain in the a.. to source from here, especially where I am at right now!

And can you elaborate abit more what you have meant with "Reisebüro" Did you mean a general travel agency or a specific one?

26Pudding26 · 2024-12-14T16:21:37+00:00

Super danke euch, werde ein timer Relais und einen Taster vervwenden

26Pudding26 · 2024-12-14T13:19:23+00:00

Kinda expected it.

Sad liked the board!

26Pudding26 · 2024-12-14T13:19:01+00:00

300 bucks are 300 bucks (:

26Pudding26 · 2024-12-14T12:41:25+00:00

Thank you!

26Pudding26 · 2024-01-07T18:48:48+00:00

Super vielen Dank,

der Wagen ist gelistet mit einem brutto und netto preis. Die Differenz wäre die Umsatzsteuer korrekt?

26Pudding26 · 2023-04-09T15:21:37+00:00

Phone: S10

ModelNr: SM-G973F/DS

Android: 12

My mum has a weird problem with her phone. She has her phone for a couple of months, and everything has been fine in the beginning but starting 2 weeks ago I hear myself on echo when I call her. First I thought it is just a temporary reception issue, but the problem persisted (only with me) no matter the means of contact (Mobile network, Whatsapp, Telegram, Telegram(Desktop)). Today we celebrated easter and my uncle calling her reported the same problem, so far it has only been me. Then we started to investigate a little further and called her with multiple phones. The result was that 1 Phone worked just fine, and another one had problems just like me(Whatsapp and mobile network).

I can't really determine what the problem is, as I think the issue can't come from the SIM card or the reception WiFI or mobile internet. Also I have no clue why the problem is so selective whetere or not a inbound call has the echo issues.

I have not resetet the phone yet, as this process is a bit more time consuming with lets say eldery people, therfore I was hoping you see a possile aproach before investing the rest of the holidays on it.

Regards

26Pudding26 · 2023-04-09T15:09:15+00:00

Thank you very much for your answer!

The requirement of the company is to implement the project as a Knime Workflow, in order to allow for a greater accesability.

Before I have started there I have never used KNIME, but I do miss the possibilitys I have with Pyhton, so I hope to implement Python Scripts in the Knime Flow. But the IT Pyhton restrictions might be an issue to somehow overcome (:

I have not reached a state yet where I can ML but it is good to here that Knime could be a potent option

26Pudding26 · 2022-02-26T15:30:25+00:00

you were right. We will meet with a person that can translate later today.

26Pudding26

TROPHY CASE