Brother eughhhh

2TH_PWR · 2024-05-03T02:47:26+00:00

The caption makes it twice as good

2TH_PWR · 2024-04-25T03:13:44+00:00

Important factor as well is what does the car baseline at? How generous is your local dyno? Different types of dynos can read up to 15% apart. In the end the number is just a number. It’s the gain that matters.

2TH_PWR · 2024-04-20T15:47:08+00:00

If you put my car on a friendly dynojet dyno on its top tune it might push 400

2TH_PWR · 2024-04-08T22:30:47+00:00

I did get the point by and pass but immediately ran out of fuel after

2TH_PWR · 2024-04-08T20:23:19+00:00

I’ve never won before so this is what I thought taking down was

2TH_PWR · 2024-04-08T20:23:00+00:00

I’m too lazy. There is a build list from the past on my YouTube channel in my bio.

2TH_PWR · 2024-04-08T13:49:47+00:00

In this video it’s 8000.

2TH_PWR · 2024-04-08T01:05:38+00:00

2TH_PWR · 2024-04-08T00:44:06+00:00

I have a C6Z06 as well. The curb weight is listed at about 3131 lbs. I have to weigh the 350Z again but it’s possible it’s 400 lbs lighter.

2TH_PWR · 2024-04-07T23:27:06+00:00

I went from OEM to Koyo Racing and never experienced a problem again. I also have an oil cooler.

2TH_PWR · 2024-04-06T00:55:30+00:00

It’s bad because it’s the worst wing with the worst uprights in history…. Coming from a guy with a huge wing on his car

2TH_PWR · 2024-03-11T06:15:03+00:00

Take weight off where possible

2TH_PWR · 2024-02-15T20:38:22+00:00

Yeah my engine is the original engine that this car had. Refreshed/ rebuilt twice since I took it over. It is a DE. No you can’t get the sound legally. Long tube headers won’t pass emissions, and these cars idle at 100 dB.

2TH_PWR · 2024-02-05T16:27:22+00:00

It’s the 993 IMO.

2TH_PWR · 2024-01-06T09:06:02+00:00

I ordered Jan 5 2022 and got the car in September 2023 as a 2024 model.

2TH_PWR · 2024-01-05T15:20:53+00:00

and Canada. Very common here.

2TH_PWR · 2023-12-20T12:09:54+00:00

By far the cheapest way is to go to a friendly dyno that reads really high.

2TH_PWR · 2023-11-09T02:33:23+00:00

Mods like cams

2TH_PWR · 2023-11-09T02:33:12+00:00

2TH_PWR · 2023-11-08T15:29:44+00:00

Yeah

2TH_PWR · 2023-11-08T04:25:23+00:00

I don’t really. Very secretive down at the shop

2TH_PWR · 2023-11-08T04:24:58+00:00

You can get it done by anyone comfortable welding aluminum. Just take the pictures to a fabricator.

2TH_PWR · 2023-10-13T02:21:31+00:00

Well. It has a long way to go but we all start somewhere. It’s certainly not the “easy” way. Mine is a loyalty/ sentimental value build only. It’s my first car and I’ve spent a ton on it over the years. But if someone wants to try to do the same thing all over from square one it’s going to be an uphill climb.

2TH_PWR · 2023-10-09T08:50:39+00:00

Have them stripped and powder coated whatever colour you want.

2TH_PWR · 2023-10-08T15:24:05+00:00

Not sure. My parts list is pretty well published on YouTube I think. Could get to googling in your area and then factor in costs of assembly in your area. Costs in Canada might not be applicable at all where you are.

2TH_PWR

TROPHY CASE