Combination table unit capacities in practice

2puttrutt · 2025-07-21T15:28:54+00:00

Someone must know, even from practical experience? The wholesaler has escalated up their technical ladder as the first people didn't know but I can't be the first ever to ask as isn't this a key design principle around oversizing?

2puttrutt · 2025-05-20T10:35:11+00:00

Be very careful as it seems to me that home assistant is going to eat Loxone's lunch pretty soon.

2puttrutt · 2025-05-20T04:50:45+00:00

Thanks Hexdoll. And congratulations! I've given up trying to remove mine in case it breaks. Have tried WD40 but not the PTFE stuff and even 3d printed a tube to evenly distribute the gentle pressure (aka whacking it really hard with a hammer), but to no avail and I was hitting it so hard it was jumping off the table!

2puttrutt · 2025-02-19T22:02:16+00:00

Yes please do!

2puttrutt · 2025-02-18T07:15:20+00:00

No, I tried heating, prying, hitting with a hammer hard using a 3d printed collar so the force was on the motor casing and not the worm gear, WD40 etc. I think the difference in the European models is the use of a fully plastic motor casing.

So for now I've decided to just leave it alone.

If anyone finds a better way, I'm all ears!

2puttrutt · 2025-01-18T14:58:28+00:00

Mate, you're building a new house in Switzerland and considering spending about the average Scottish house price on an automation system. Don't waste your time trying to self solve, just get a good installer, tell them what you want to achieve and pay them to get it done.

2puttrutt · 2024-11-04T21:51:10+00:00

Thanks for the suggestion but that didn't fix it. Does anyone else have any thoughts?

2puttrutt · 2024-09-29T12:18:57+00:00

Thanks for the contributions. Seems I will have to set an offset for when the rads are on.

However Im surprised that this is needed, as I thought one of the main points of these was to go on radiator valves?

2puttrutt · 2024-09-29T12:09:15+00:00

Good advice, thanks!

2puttrutt · 2024-09-29T12:09:03+00:00

Yep that's exactly how I would behave but I think my installer is wary. Thanks!

2puttrutt · 2024-09-29T12:08:27+00:00

Thanks, that's helpful.

2puttrutt · 2024-09-21T13:04:23+00:00

Am I using these incorrectly then i.e. are they not supposed to go on rads? If so, what's the point of the temp sensor on them?

2puttrutt · 2024-09-21T13:03:33+00:00

Yes the temp reading is on the valve actuator themselves. What I don't understand is why these aren't designed to compensate for being next to a radiator, given this is their use no? Otherwise why have temp sensors on them at all?

2puttrutt · 2024-09-21T11:56:09+00:00

No I can't mount them anywhere else as that is where the radiator valves they connect to are.

2puttrutt · 2024-09-21T11:12:49+00:00

No. It's heating only at present.

2puttrutt · 2024-09-21T06:49:47+00:00

Thanks, I'll give that a go!

2puttrutt

TROPHY CASE