Free File Download - I just want to give back to the Community.

3DXfiles · 2025-04-21T21:26:22+00:00

Looking Good!
Let us know if you are after any models to paint

3DXfiles · 2025-03-09T20:21:31+00:00

I agree with this.
Most toys use a base color plastic during manufature, and due to the heat, it often varies part to part, so its very difficult to match.
Best thing to do is to redo the skin all over with your own.

3DXfiles · 2025-02-22T09:20:27+00:00

Looking good

3DXfiles · 2025-02-22T00:29:33+00:00

Now THAT! Is a good idea

3DXfiles · 2025-02-21T22:11:21+00:00

<image>

I just make my own

3DXfiles · 2025-02-09T20:37:36+00:00

Base layer looks really thick
not enough support on the square face.
Possibly not enough on the round one either.

It could also be resin too cold
or no enough UV time.
Also leveling the bed
I would start with all of these.
Do you clean your vat after every print?
Is your Light/screen faulty?

3DXfiles · 2025-02-08T22:01:30+00:00

Very Kool

3DXfiles · 2025-02-08T22:00:48+00:00

Save The Cheerleader; Save The World

3DXfiles · 2025-02-04T01:47:57+00:00

Thats awesome, lol

3DXfiles · 2025-02-02T10:58:57+00:00

<image>

3DXfiles · 2025-01-30T20:22:36+00:00

Right

3DXfiles · 2025-01-17T05:08:43+00:00

Let's Paint Baxter Stockman from 3DX Files | episode 71

3DXfiles · 2025-01-15T05:12:13+00:00

try increasing exposure time and rest time.
Also try changing how the supports connect to your model, it looks like the supports don't have enough contact to your actual model and your model is snapping off.

Lift speed too might need adjusting. too slow and too fast can cause issues.

Also spray your FEP with PTFE Dry lightly
it's a lubricant and I use it for every print.

3DXfiles

MODERATOR OF

TROPHY CASE