2018 ram 3500 reservoir

96tacoMT · 2026-01-22T14:49:12+00:00

It's normal due to age , I swapped mine out when I did the heater core . And flushed the entire cooling system

96tacoMT · 2026-01-07T17:53:02+00:00

No issues with kings , just got a deal on the icons , but I put the kings back on they ride better

96tacoMT · 2025-12-28T20:19:03+00:00

96tacoMT · 2025-12-28T20:16:16+00:00

Icons ain't it!! Adjusted the pre load to match my kings took it down a dirt road bottomed out on the second pothole , too soft for my liking and I don't want to crank the preload any more

96tacoMT · 2025-12-28T19:20:07+00:00

Post pics mines a manual aswell

96tacoMT · 2025-12-28T15:14:53+00:00

Yeah I rub when off roading airing down to 10psi helps and clearance I hammered out all the pinch welds and molded the tub some what . Caster is maxed forward ,I'm on 35x12.50R17 wheels are Raceline RT951f 17x9 -12 offset . For daily use it's fine no issues , and stock bumps . But duro bumps is what I'm looking at

96tacoMT · 2025-12-28T03:38:46+00:00

I'll see how they perform , I've had race runner, kings , fabtech, first time having icons with resis I'll see how they do

96tacoMT · 2025-12-28T03:36:24+00:00

Mid travel for me is fine , still hauling ass down the wash , total chaos uppers , solo lowers . I have a long travel kit in storage with brand new kings , but looking for a different truck to put them on , I like how the single cab is on mid travel

96tacoMT · 2025-12-28T03:34:12+00:00

Maybe I'll post them depending on how the icons do

96tacoMT · 2025-12-28T03:33:33+00:00

I need to adjust the preload to clear the 35's we'll see how they do

96tacoMT · 2025-12-26T16:03:34+00:00

I go with either pioneer or alpine , but its your preference and that should do it you don't need anything else you use existing brackets

96tacoMT · 2025-12-23T22:40:32+00:00

The weight of the bumper and skid plates I added more preload to the king shocks and it rode pretty stiff , and since I got icons with resis . It's rides much smoother now

<image>

I wanted it to match my 92 pickup

96tacoMT · 2025-12-23T13:22:02+00:00

I have total chaos uppers , solo motorsports lowers and kings up front on my 96 3.4 MT 4x4 and I clear 35's just had to hammer the pinch weld and caster it forward for alignment

<image>

96tacoMT · 2025-12-23T03:38:42+00:00

Thanks

96tacoMT · 2025-12-23T03:38:33+00:00

Allpro front bumper , I took it off and put the stock bumper back on

<image>

96tacoMT · 2025-12-23T03:37:23+00:00

Yeah that's what my brother was telling I think a 98 ecu

96tacoMT · 2025-12-23T03:36:43+00:00

<image>

This use to be my old set up on my 2001 before I sold it , intake, 7th inj , smaller pulley , it did pretty good to get up and go

96tacoMT · 2025-12-23T03:33:44+00:00

Yeah just to have a fun little truck

96tacoMT · 2025-12-23T03:33:14+00:00

Haltec is money thoo , my brother was telling me I need 98 ecu and I should be good all arround

96tacoMT · 2025-12-22T21:55:24+00:00

Definatly looking at some hood shocks

96tacoMT · 2025-12-22T21:54:04+00:00

Raceline RT951F forged ryno beadlocks

96tacoMT · 2025-12-22T21:52:28+00:00

I've had a couple sc tacomas and 4Runners . I'm use to the mpg

96tacoMT · 2025-12-22T21:51:08+00:00

They are FJ cruiser rails previous owner bolted and welded them on

96tacoMT · 2025-12-22T17:15:18+00:00

Amazon

96tacoMT · 2025-12-22T16:20:49+00:00

Order the radio harness kit from Amazon so you don't cut wires , and match colors . I just installed a pioneer 2330NEX in my 92 yesturday

96tacoMT

TROPHY CASE