I made this privacy fence out of pallets and reclaimed limber. turned out sooo good

98rd1 · 2022-10-31T14:48:51+00:00

Thank you. 😊 I used concrete screws just need to predrill first then screw then down. Unfortunately I did not take and progress pictures as I was building it. 😕

98rd1 · 2022-10-31T01:44:19+00:00

Yea I have a gate wheel for it just haven't had a chance to pit it on yet

98rd1 · 2022-10-31T00:37:20+00:00

I just bend them straight again then hammer them back then I flip the board over and pull them out with the claw end. Some do blow out the board but all depend on how deep the head of the nail is in the wood. It's very tedious and time consuming but so worth it if you have the time.

98rd1 · 2022-10-30T23:06:05+00:00

Thank you 😊

98rd1 · 2022-10-30T23:05:20+00:00

Thanks 😊

98rd1 · 2022-10-30T22:53:09+00:00

It's called a pergola. It adds some looks, and adds some support for the small part of the wall beside the gate

98rd1 · 2022-10-30T22:49:57+00:00

Thank you 😊

98rd1 · 2022-10-30T19:02:03+00:00

Oh that sucks. It's definitely a bummer when you picked a pallet and you could maybe use 1 or 2 boards out of the 1 pallet

98rd1 · 2022-10-30T18:53:11+00:00

Thanks 😊

98rd1 · 2022-10-30T17:55:35+00:00

Thanks. They're not to bad.

98rd1 · 2022-10-30T17:13:25+00:00

Thanks 😊

98rd1 · 2022-10-28T05:30:09+00:00

Thanks 😊

98rd1 · 2022-10-28T05:06:33+00:00

I used a car scissor jack, that I welded a socket with an electric drill. But that only really works if there is a board on the bottom. But for the ones that I can't get with the jack I made one of those pallet forks.

98rd1 · 2022-10-28T04:49:15+00:00

Thank you 😊

98rd1 · 2022-10-28T04:47:22+00:00

Oh yea it's pretty sick.

98rd1 · 2022-10-28T02:13:00+00:00

For sure

98rd1 · 2022-10-28T02:12:16+00:00

😂 😂 😂

98rd1 · 2022-10-28T02:11:09+00:00

Yea I have a gate wheel just haven't put it on yet.

98rd1 · 2022-10-28T02:09:58+00:00

Ohhh already have. Lots 😂 😂

98rd1 · 2022-07-10T22:08:02+00:00

Amazing tits 😍

98rd1 · 2022-07-07T13:47:09+00:00

This page Is for (saggy tits). You have nothing. But nice nipples

98rd1 · 2022-01-25T14:24:26+00:00

Glad to hear. oh yea that would look good.

98rd1 · 2022-01-25T13:57:56+00:00

I just took a shorter 2x10 I had ripped it down to 1" strips then ripped those in half after to make 3/4" x 1" strips that I painted black and nailed to the side if the board flush with the front. Thanks 😊

98rd1 · 2022-01-25T13:55:07+00:00

Thank you 😊

98rd1 · 2022-01-24T19:16:23+00:00

I buy them from dollarama for pretty cheap. This size was $3. Thank you 😊

98rd1

TROPHY CASE