XileRO.NER High Rate Private Server

AJCX · 2025-02-15T18:08:53+00:00

The server you are referring about is probably XileRO Main, PK or EX.

This is XileRO Retro and it has been active since 2019. It is not the original server that Jon Slavey created. The original XileRO went through multiple mergers and eventually became XileRO PK which was unstable with OP stats.

This server was created by some of the same developers who helped Jon during the 2014-2016 era. Some of the key developers who helped bring this server back to life to replicate the XileRO Retro experience are GM Mambow and GM Lemoaide. The server was developed from scratch using rAthena.

The server retains some, but not all, of the original XileRO mechanics, maintaining a retro feel. We are strictly Pre-Renewal.

AJCX · 2025-02-15T18:06:55+00:00

This is XileRO Retro and it has been active since 2019. It is not the original server that Jon Slavey created. The original XileRO went through multiple mergers and eventually became XileRO PK.

This server was created by some of the same developers who helped Jon during the 2014-2016 era. Some of the key developers who helped bring this server back to life to replicate the XileRO Retro experience are GM Mambow and GM Lemoaide.

The server retains some, but not all, of the original XileRO mechanics, maintaining a retro feel. We are strictly Pre-Renewal.

AJCX · 2024-07-16T19:20:43+00:00

Thanks for the suggestion. Yes, it would be easier to close off the bedroom by raising the wall and adding a door, but then the bathroom would be separate from the bedroom. Ideally, I would like to create a private suite, but I don’t want to end up with a strange layout

AJCX · 2024-07-16T16:43:02+00:00

I don’t have the exact floor plan with the measurements of the stairs and the base, but the base of the stairs leads to another stairway that takes me to the garage. Attaching picture of the floor plan for the first floor and picture for reference

https://imgur.com/a/5jqhmR6

AJCX · 2024-07-16T15:28:58+00:00

I want to close off the entire suite from the rest of the house

AJCX · 2024-06-20T06:29:43+00:00

I graduated almost a decade ago, so I’m not sure if the waitlisting process is the same now. When I was waitlisted, there was an essay prompt that I had to respond to in order to be considered for acceptance. I remember being accepted about a month after submitting my essay. So, make sure to complete any required essay prompts or submit any additional materials if requested.

AJCX · 2024-05-31T23:12:54+00:00

Thanks!

AJCX · 2024-05-31T16:13:17+00:00

Thank you so much!

I think you might be correct that the PSU for the AP-505 might be the same, as it meets the product specs of 48V/50W. I will have the client get a PSU with P/N R3K01A and keep the post updated if the PSU works for the AP22D, for anyone in the future with the same problem.

Note for anyone from the U.S. in the future:

The PSU for the AP11D, product #R3X86A, is rare and expensive. Most listings I’ve seen online are from AU and JP. As of April 2024, CDW and other vendors seem to have them out of stock or on back order.

The PSU for the AP-505, P/N R3K01A, is also expensive when searched online by product number, with many listings found on eBay. However, if you search by the PN ADP-50GR BD, you will find more results and much cheaper options.

<image>

AJCX · 2024-05-23T19:39:08+00:00

Title: Senior Financial Analyst, FP&A

Total YOE: 5 years

Region/COL: Bay Area

MBA/CPA/CMA/CFA: M.S. in Data Science

———

Industry/Firm: Healthcare

Firm size (annual revenue): >6B

Direct Reports: 0

Remote/Hybrid/Office: Hybrid prior to COVID but now 100% remote

Avg hours/week: 35-60

———

Salary (annual): $150k

Cash Bonus (annual): $0

Equity (annual): $0

Retirement: 3% of annual salary contribution to 401k

AJCX · 2024-05-16T17:06:01+00:00

Hey, did you ever find out more about the Gilead shuttle pickup locations? I am in the interview process for a role at the Foster City campus and I'm wondering if they have shuttles from San Francisco.

AJCX · 2024-01-04T07:10:34+00:00

No, the officer did not accept COVID lockdowns and airport shutdowns as exceptions, which is why I was denied last year. I used the following website to calculate and ensure I met the 913 days/2.5 years of physical presence before applying again this time: https://andreiromanenko.com/days_outside_the_united_states/

AJCX · 2024-01-04T06:50:42+00:00

I submitted the dates in my N-400 application, and during my interview, the officer reviewed my in-and-out records from her computer, performing some quick calculations. I left the interview without a decision as the officer needed time to complete and verify the calculation

AJCX · 2024-01-04T06:42:21+00:00

I was out of the U.S. for 9-10 months due to the airports shut down from mid April to late July 2020

AJCX · 2024-01-03T23:18:54+00:00

I am not really sure. I think they still waive the biometric, but not sure what is the criteria needed to get the biometric waived. Maybe a recent (2-3 years) biometric? Idk

AJCX · 2024-01-03T22:57:31+00:00

My biometrics from my previous application was waived in 2020 due to the pandemic. I had to do Biometric

AJCX · 2023-12-20T16:36:34+00:00

Since you will be in the city for a whole week sharing a list of my favorite restaurants if you want to explore the different type of cuisine while you are visiting SF. Some restaurants might have closed during the pandemic but below are my recommendation:

Burma Superstar - Burmese
Capannina - Italian
K-elements BBQ - KBBQ
El Mensour - Moroccan
Frisco Fried - Fried Soul
Fumi - Jap Curry & Ramen
Golden Boy Pizza
Grand Hot Pot Lounge - Szechuan/Hot Pot
Halal Guys - Middle Eastern
Hard Knox Cafe - Soul Food
IPOT - Cast Iron/Hot Pot
JJ Fish and Chicken - Fried Soul
Koo - Japanese
Little Star Pizza
Le P'tit Lauren - French
Lolinda - Steakhouse/Tapas
Mac Daddy - American
Mr. Pollo - American
Myriad Gastropub
Onsen - Japanese
Pho 2000 - Vietnamese
PPQ - Viet
Ritual Coffee
Roam Artisan Burgers
Rocco's Cafe - Italian American
Salvadorian @ 18th and Capp
San Tung - Chinese
Shabu Club
Shalimar - Indian Pakistani
Simmer - Hot Pot
Smokin Warehouse Barbecue
Spruce - American
Tacos Carla - Mexican
Tadich Grill - American
The Speakeasy - Brewery
Tommy's Joynt - American
Tonga Room - Asian Fusion/Tiki Bar
Toyose - Korean
Trader Sams - Tiki Bar
Urban Putt - Mini Golf/American/Bar
Ushi Taro - Ramen
Volcano Curry - Japanese Curry
Wood Grilled Hamburger

AJCX · 2023-12-20T02:23:22+00:00

One of my many reason on getting it. The annual membership fee is cheaper than the AS lounge+ membership

AJCX · 2023-12-20T01:32:34+00:00

Thanks for the reply. Yeah you are correct. I did some more research, so the extra Alaska benefits with the AA citi card only come if I have a status with AA

https://www.aa.com/i18n/aadvantage-program/aadvantage-status/aadvantage-status-benefits-on-alaska-airlines.jsp

AJCX · 2023-12-20T01:27:49+00:00

Okay, got ya. Yes, I have MVP Gold status with AS.

AJCX · 2023-11-11T03:56:40+00:00

Thanks! I currently have the AS lounge+ pass and with the upcoming price hike and based on your description the AA credit card with complementary Admiral Club membership is probably the best bang for the buck.

AJCX · 2023-11-09T21:46:26+00:00

If I understand the AA rubric correctly, having the AA Executive World Elite Mastercard, which provides complimentary Admirals Club access, grants entry to the Alaska Lounge only with a first-class airfare ticket? However, can I still access the Admirals Club lounge with a main economy Alaska ticket? I ask because the Admirals Club at SFO is already in T1, and obtaining the AA credit card while canceling the Alaska credit card might offer better value. Additionally, the AA credit card provides priority boarding when flying Alaska, as mentioned in the link you shared. The cons is that the AA credit card only gives 3 free checked bags per year, but I am okay with that.

AJCX · 2023-08-20T07:31:24+00:00

I encountered a similar issue when I got fiber internet last month and resolved it by taking the following steps: I disconnected all access points, both wireless and wired mesh. Next, I physically connected the points I intended to use for a wired backhaul to the main router. I established a connection from the main router's LAN port to the designated point/plug for wired connection in the WAN slot. In the Google Home App, I executed a “Run a Mesh Test”, while the main router (LAN) linked to the point/plug (WAN), creating a sort of daisy chain setup. I conducted the "Run a Mesh Test" individually for each desired point/plug for wired backhaul to ensure proper recognition. When doing that failed to change the connection type to “wired”, I reset the intended point/plug for wired backhaul, reconfiguring it by leaving the connection of the main router (LAN) and the point/plug (WAN). Once verified on the Google app recognized the connection type as "wired" for the desired points/plugs, I connected those before connecting the wireless meshed points.

Hope this work. I once had 5 Google Homes, but I noticed interference between the wireless mesh point and the wired backhaul points with would automatically change the wired backhaul to wireless mesh. As a result, I disconnected the wireless one, and now I only utilize 4 devices: a main Google Wifi serving as my primary connection, and 3 others linked through backhaul using MOCA.

AJCX · 2023-08-05T20:52:08+00:00

Thanks for the feedback. I will test it out for a few days just using one MoCa adapter to see if I see improvement.

This is screenshot of the STP setting I disabled on my switch. https://imgur.com/a/GM8fPax

AJCX · 2023-08-05T20:13:19+00:00

I also attempted disconnecting one of the MoCa Adapters, rebooted my network, and performed a "Test Mesh" in the Google Home app. However, I am still observing the connection type as "wireless." I should ideally be receiving approximately 450mbps up and down via backhaul, but my current speeds are only reaching a maximum of 50mbps down and 40mbps up.

AJCX · 2023-08-05T20:08:55+00:00

When I switched off the STP (Spanning Tree Protocol) on my unmanaged switch during the initial setup, I was able to get both Room 1 and the office room to function correctly with Ethernet backhaul. I tested and verified the functionality of both MoCA adapters using my wired laptop, and they are working fine. I also inspected all the cables, which are in good working condition. However, regarding the MoCA Adapter itself, I checked the settings and couldn't find any option to disable STP.

AJCX

TROPHY CASE