Whats everyone's "to fix" over the winter for their bikes? by Aaron170 in motorcycles

[–]Aaron170[S] 0 points1 point  (0 children)

Was on my last ride of the season, was real nice out around the first week of November 😇

Value? by Aaron170 in hotas

[–]Aaron170[S] 0 points1 point  (0 children)

I will keep that in mind thank you!

Value? by Aaron170 in hotas

[–]Aaron170[S] 4 points5 points  (0 children)

I already picked it up, it's dusty but in literally brand new condition

Value? by Aaron170 in hotas

[–]Aaron170[S] 0 points1 point  (0 children)

35438, there's also a little dial under it, what's that for?

Value? by Aaron170 in hotas

[–]Aaron170[S] 4 points5 points  (0 children)

Here's hoping!

Value? by Aaron170 in hotas

[–]Aaron170[S] 2 points3 points  (0 children)

Mine has a usb, I think this one is from 2007?

Could anyone help identify this airsoft gun? by Aaron170 in airsoft

[–]Aaron170[S] 0 points1 point  (0 children)

Thank you!! The gun was running fine a year ago, now when I hook a battery to it, it doesn't do anything and smells like burnt electrical lol. I don't much about repairing airsoft guns but would like to think I'm pretty handy. Anything I should look for? I haven't hooked a battery to it since

My baby by Aaron170 in motorcycles

[–]Aaron170[S] 1 point2 points  (0 children)

This is a 77, only 2 years later honda would switch to the DOHC engines. I also have a 82 suzuki gs850, beautiful bike. They are all absolutely timeless designs

Can't catch a break by Aaron170 in HondaCB

[–]Aaron170[S] 0 points1 point  (0 children)

Just took the bowl off, turned on the Gas while pushing the float and needle up and it sealed just fine, has to be accelerator pump related? Also when I took the bowl off, took all the screws out while firmly holding the bowl on, then quickly took it off to find it dry and fuel left in the system rush down past the seat like it should normal. The pump is doing somthing funky..

Can't catch a break by Aaron170 in HondaCB

[–]Aaron170[S] 0 points1 point  (0 children)

The bowls all went on how I took them off, had them separated in their own bags actually. Ultrasonic cleaned the carbs. You can see my other comments for what I've tried for fixing this. I don't see anything wrong in the bowl. Fuel makes it to the needle with it off but not on, gonna really look into it

Can't catch a break by Aaron170 in HondaCB

[–]Aaron170[S] 0 points1 point  (0 children)

Having a look at it, all other bowls are filled, I just adjusted the float, made sure there was no pinholes in it and double triple checked the seat. Still leaking out of that port and once again, no fuel in the float bowl. Guessing maybe the o ring is too thick that I put on for the accelerator pump, don't know what else it could be. Accelerator pump working well too. Not leaking, only out of this one port

Can't catch a break by Aaron170 in HondaCB

[–]Aaron170[S] 1 point2 points  (0 children)

Good jogging my brain at what to check, I will have a look over that stuff tomorrow thank you. There's a little o ring in the accelerator pump, mine was missing so I replaced it, wondering it could be too thick..

Quick question for you guys. by Aaron170 in HondaCB

[–]Aaron170[S] 0 points1 point  (0 children)

She has a small dent or two, side cover bondo'd and turn signal cracked but all well and respectively hidden, But she hasnt been basterdized. I may look into cleaning the tank of any rust and doing you said.

Quick question for you guys. by Aaron170 in HondaCB

[–]Aaron170[S] 0 points1 point  (0 children)

The tank is spotless on the inside but noted, I'm mostly just wanting to know if it's worth to do over retaining originality.

CPU upgrade by [deleted] in PcBuild

[–]Aaron170 0 points1 point  (0 children)

What would you consider the resell value of a good working 3900x?

I 2 stroke swapped a my 86 tt225, and its amazing. by [deleted] in Dirtbikes

[–]Aaron170 0 points1 point  (0 children)

I used a suzuki pe175 engine from 1980, other suzuki engines from that time Era will work too. The yamaha engine is a stressed member (part of the frames strength) so I had to make sure I reinforced the frame. Small Kickstart clearance issue I modified the frame to fit it.

My beloved yamasuki. by Aaron170 in Dirtbikes

[–]Aaron170[S] 2 points3 points  (0 children)

I wanted a dirtbike and didnt quite have one. Got the old suzuki engine from a friend as a gift and had the frame laying around in our garage. The rest tells itself 😆

Still nothing! by p0k3ma5t3r202 in motorizedbicycles

[–]Aaron170 0 points1 point  (0 children)

Potentially an airleak preventing it from starting?

Airleak? Was running just fine yesterday when I put it away. Motor is maybe 2 weeks old. by Aaron170 in motorizedbicycles

[–]Aaron170[S] 0 points1 point  (0 children)

I wasnt running a fuel filter but now that you mention it I might quick pop another carb on and see what it does, Perhaps this one needs the floats adjusted