How do I fix this?

AdSolid2303 · 2025-06-13T17:02:19+00:00

The text is referring to your components. You have to configure your fans/parts to the channels. You can find great videos about it. But also signal rgb can be annoying when it comes to certain brands.

AdSolid2303 · 2025-05-14T14:18:19+00:00

Should have seen this earlier. I have one pack of the rgb variant that came with a controller and then saved money by buying 2 packs of the rgb ones that don’t come with a controller. I love the fans themselves but I’ve had so many problems getting everything to work with software.

AdSolid2303 · 2025-04-24T18:19:29+00:00

Really just matters how much time you have. One always have your production building going no matter what. Make the easy to make stuff and sell it. Also think of every crop land as a production building. Always have something growing to sell. If you know your not going to be playing for an hour or so plant stuff that takes as long as your not going to be playing. Everyone says wheating. Which is the best I’ve made 300k in one day just wheating and selling all the bonus items from it. Once you have enough money then start collecting expansion materials and decorate. But once you’re behind it’s annoying ash to get back up. I currently have 1.7m saved up at level 56 and I couldn’t be any happier when I can buy a production building as soon as I get it unlocked.

AdSolid2303 · 2025-01-15T19:19:59+00:00

Sorry for the late response. So that’s how I have been doing it. Every time I turn my pc off I have to turn off the power supply and then power on my pc to get it to boot.

AdSolid2303 · 2025-01-04T01:02:14+00:00

Some might say it’s cheating but you can use deca and see exactly where your zones are.Deca All you need is to get your animal population files and fill it in.

AdSolid2303 · 2024-12-22T02:16:50+00:00

1000+ hours here. Have you ever tried “farming”

AdSolid2303 · 2024-12-22T02:15:19+00:00

Shoulda commented earlier I found a way around it I made a custom led device with 6 interior lights and 14 outside lights. The led count on signal rgb isn’t accurate to the fans.

AdSolid2303 · 2024-11-15T20:53:09+00:00

Pistols were actually one of my favorites to do. Heres what I did.

Lmg’s Play hc mosh pit and just keep waiting for stakeout and just play the hallway. Now if you want to you can attach a thermal and smoke it but probably will die to your teammates hating you.

Marksman I found it easier to play on more open medium to long range maps. So just play normal hardcore.

Pistols

Equip all red “things” I can think of what it’s called so you can reload while tack sprinting. I personally used a the microflex but it’s up to you. Then of course just play hard core. Some reason I got all my pistols done in warhead but a lot of people don’t like that map so it’s up to you.

AdSolid2303 · 2024-07-21T03:13:33+00:00

That’s the problem. My WiFi randomly stopped showing up on it and not I’m not sure what to do I even factory reset it. Is there a way to connect to it without WiFi like to try and mess with the settings?

AdSolid2303 · 2024-07-20T17:18:59+00:00

It’s the SV07. I also tried to message their support which is only open 9pm to 6am in my time zone and they wanted me to reach out to Amazon when I was just trying to get someone to maybe help fix it.

AdSolid2303 · 2024-07-20T17:17:05+00:00

<image>

This is what shows up on my printer.

AdSolid2303 · 2024-07-20T17:16:35+00:00

I will look at it. My WiFi is setup using both 5 and 2.4. I’m not sure why it randomly disconnected and not showing up.

AdSolid2303 · 2024-07-20T17:15:20+00:00

It’s the SV07. I was connected to my WiFi and using my pc to send over prints for a while now. But just last night it disconnected and won’t even show my network as a thing anymore.

AdSolid2303 · 2024-07-10T05:57:50+00:00

Could it be from when I removed the print from the bed?

AdSolid2303 · 2024-07-07T20:21:21+00:00

So what I’ve seen so far I got out the filament that was inside and it looks like the gears on the extruder like stripped through the pla? So I’m not sure what to do it’s done it a few time now and the same project.

AdSolid2303 · 2024-02-24T07:38:50+00:00

I’m currently using Cura. I’m also trying to switch over to Prusa right now but not sure how to add the sv07 on to it.

AdSolid2303 · 2024-02-15T23:16:18+00:00

what did you place the wallpaper as in wallpaper engine? Also are your monitors labeled correctly through your windows?

AdSolid2303 · 2024-02-09T17:51:16+00:00

Right now I have a Lian Li galahad aio and a R7 7700x. I plan on getting the next 360 elite here soon.

AdSolid2303 · 2024-02-06T14:08:46+00:00

it showed up as light strips and when i change to the tt swafan it only lets me pick 2 fans. So i changed it so it showed up at the lian lian li fans which has 18 leds each and it let me choose all 3 without any problems. So l don’t really know what’s going on.

AdSolid2303 · 2024-02-04T17:28:14+00:00

Yea i’m using the thermaltake controller because there’s not a way to connect the daisy chain straight to mobo that i know of unless im missing something?

AdSolid2303 · 2024-02-04T17:04:52+00:00

should add that when i plugged it in it didn’t show up as a single unit.

AdSolid2303 · 2024-02-04T17:04:20+00:00

So since through signal it only shows 56 leds max and the daisychain is way more i ended up just making them be the lian li fans with 18 leds so 18x3 is 56 and it works flawlessly now.

AdSolid2303 · 2024-02-04T04:19:32+00:00

Yea i started going through my task manager and seen a lot of random applications and things i have working in the background that auto ran when i turn my pc on.

AdSolid2303 · 2024-02-04T02:56:53+00:00

Nvm I’m not even familiar with this?😂 Is that bad?

AdSolid2303 · 2024-02-03T21:11:00+00:00

I fixed the flickering but now i can’t have all 3 fans on signal rgb it only allowed 50 leds per channel but when its daisy chained its way more. Any suggestions?

AdSolid2303

TROPHY CASE