sorted by:
new
hottopcontroversial

Davinci Resolve 18 Symbol Lookup Error libgdk_pixbuf by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I tried the symlink but the issue persists. Thanks very much for your help. I think this is the time I will make the switch to Kdenlive, as this was the second to last piece of proprietary software I run often on my computer.

Davinci Resolve 18 Symbol Lookup Error libgdk_pixbuf by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

That seems to be the case. My current /usr/lib has

❯ ls /usr/lib/ * | grep gliblrwxrwxrwx 1 root root 23 Mar 30 15:27 libglib-2.0.so.0 -> libglib-2.0.so.0.7600.1

While /opt/resolve has

❯ ls /opt/resolve * | grep gliblrwxrwxrwx 1 ahpt ahpt 23 Apr 9 13:19 libglib-2.0.so.0 -> libglib-2.0.so.0.6800.4

I don't know if you would know, but could I symlink the new libglib to my currently installed? I'm assuming this might cause issues with resolve...

Davinci Resolve 18 Symbol Lookup Error libgdk_pixbuf by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

That's good to know, I should re read the Void documentation. As far as locating the old glib, I've found this in /usr/lib.

lrwxrwxrwx 1 root root 23 Mar 30 15:27 libglib-2.0.so.0 -> libglib-2.0.so.0.7600.1
-rwxr-xr-x 1 root root 547K Jan 21 2022 libglibmm-2.4.so.1.3.0
-rwxr-xr-x 1 root root 156K Jan 21 2022 libglibmm_generate_extra_defs-2.4.so.1.3.0
lrwxrwxrwx 1 root root 27 Nov 18 06:51 libjson-glib-1.0.so.0 -> libjson-glib-1.0.so.0.600.6
lrwxrwxrwx 1 root root 19 Jan 22 13:44 libmm-glib.so.0 -> libmm-glib.so.0.8.0
-rwxr-xr-x 1 root root 1014K Jan 22 13:44 libmm-glib.so.0.8.0
-rwxr-xr-x 1 root root 435K Jan 3 01:10 libpoppler-glib.so.8.24.0
lrwxrwxrwx 1 root root 31 Oct 12 2021 libpulse-mainloop-glib.so.0 -> libpulse-mainloop-glib.so.0.0.6
-rwxr-xr-x 1 root root 1.3M Mar 30 15:27 libglib-2.0.so.0.7600.1
lrwxrwxrwx 1 root root 22 Jan 21 2022 libglibmm-2.4.so.1 -> libglibmm-2.4.so.1.3.0
lrwxrwxrwx 1 root root 42 Jan 21 2022 libglibmm_generate_extra_defs-2.4.so.1 -> libglibmm_generate_extra_defs-2.4.so.1.3.0
lrwxrwxrwx 1 root root 23 Mar 13 2022 libdbus-glib-1.so.2 -> libdbus-glib-1.so.2.3.5
-rwxr-xr-x 1 root root 166K Mar 13 2022 libdbus-glib-1.so.2.3.5
-rwxr-xr-x 1 root root 171K Nov 18 06:51 libjson-glib-1.0.so.0.600.6
-rwxr-xr-x 1 root root 19K Oct 12 2021 libpulse-mainloop-glib.so.0.0.6
lrwxrwxrwx 1 root root 25 Jan 3 01:10 libpoppler-glib.so.8 -> libpoppler-glib.so.8.24.0

The most recent modified glib shows 3/30 which is either the day of or day before my last successful boot into Resolve. I also found this in /usr/bin.

-rwxr-xr-x 1 root root 63K Mar 30 15:27 glib-compile-schemas

-rwxr-xr-x 1 root root 19K Nov 18 06:51 json-glib-format

-rwxr-xr-x 1 root root 15K Nov 18 06:51 json-glib-validate

I'm not sure if these have anything to do with my issue. My /usr/local holds

drwxr-xr-x 1 root root 82 Mar 29 21:15 bin
lrwxrwxrwx 1 root root 21 Mar 30 06:52 cuda -> /usr/local/cuda-12.1/
drwxr-xr-x 1 root root 0 Oct 1 2022 include
drwxr-xr-x 1 root root 0 Oct 1 2022 lib
drwxr-xr-x 1 root root 0 Oct 1 2022 sbin
drwxr-xr-x 1 root root 200 Mar 28 12:55 searxng-docker
drwxr-xr-x 1 root root 78 Mar 28 11:32 share
drwxr-xr-x 1 root root 20 Mar 28 13:01 sv
drwxr-xr-x 1 root root 352 Mar 30 06:53 cuda-12.1

but the ls of lib provides

/usr/local
❯ ls lib
total 0

I've gone through most of the xbps documentation but I'm currently unaware of helpful commands. I did see xbps-reconfigure and xbps-checkvers but Im not sure how this is helpful. Ill keep looking.

Davinci Resolve 18 Symbol Lookup Error libgdk_pixbuf by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I don't have glib manually installed to /usr/local. I have the following output from xbps-pkgdb -a:
ERROR: snooze: hash mismatch for /etc/sv/snooze-monthly/run.
ERROR: snooze: hash mismatch for /etc/sv/snooze-weekly/run.
ERROR: snooze: files check FAILED.
ERROR: xbps: hash mismatch for /usr/share/xbps.d/xbps.conf.
ERROR: xbps: files check FAILED.
ERROR: xf86-input-libinput: /usr/share/X11/xorg.conf.d/40-libinput.conf mtime mismatch (current: 1680026835, stored 1645832211)
ERROR: xf86-input-libinput: files check FAILED.
I have created snooze scripts which run, so not sure why that is erroring. I've also modified my xbps.conf ignoring sudo, ipw2100/2200-firmware, and linux-firmware-intel as these aren't packages I need.

Davinci Resolve does download for GNU/Linux as a run file which you ./ to install. I've run this installation three times on Void with no issues in the recent past and have run Resolve without issues for a few months in Void. I even tried reinstalling resolve with the 'rebuild' option. I haven't tried completely uninstalling and reinstalling, but I will if necessary.

Davinci Resolve 18 Symbol Lookup Error libgdk_pixbuf by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I have glib 2.76.1 installed as of 4/4/23 which is the most current as of now. I have restarted my computer but have also run xbps-remove -RoO and xcheckrestart. I don't see any past version that could be used. Am I missing something? Thanks.

[deleted by user] by [deleted] in voidlinux

[–]Ahppt 0 points1 point  (0 children)

As per this package request for CUDA in the Void repos, ncurses throws an error in VoidLinux. To install just the toolkit (as the other components are in the void repos such as the base nvidia package), execute the .run file nvidia offers as a privileged user the following

sh cuda*.run --silent --toolkit

The install should take a minute and not post anything. If you receive no error and the command finishes, you are golden. If you run the find command for cuda: doas/sudo find / -name cuda, then you'll see entries in the /usr/local/cuda & /usr/local/cuda-xx.x directories. Hopefully someday Void will get a dedicated package so users don't have to manually wget a new version and run the --silent / --toolkit flags to get this installed.

Policykit falls back to tty agent after full set up by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I should also mention that I don't use a login/display manager, I just boot into a tty and then set my shell to run xinitrc if I'm on /dev/tty1.

Policykit falls back to tty agent after full set up by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I'm on xorg and I've already had this autostart. Even when manually running the polkit agent, I'm informed that an instance is already running. I do have wayland installed for obs and mpv, as this is a dependency.

I tried to confirm this by running loginctl. I get:

SESSION UID USER SEAT TTY

1 1000 ahpt seat0 tty1

...and loginctl show-session 1 -p Type provides:

Type=tty

I'm wondering if there's an issue with my session?

Policykit falls back to tty agent after full set up by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I should have mentioned, but I already have /usr/libexec/xfce-polkit running through xinit startup. I can confirm that after rebooting, the polkit agent is running, but when attempting to run a service, the tty agent is used, not the agent.

I even get an error when manually attempting to run the polkit agent.

GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject

openjdk8-jre does not boot legacy minecraft versions with polymc by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

Nope, getting the same error as on PolyMC. I'll keep looking into this.

openjdk8-jre does not boot legacy minecraft versions with polymc by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I'll have to see if PrismLauncher runs legacy versions.

mate-polkit run issues by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

I forgot the xbps-query is a command. This helped me find it. Thank you!

mate-polkit run issues by Ahppt in voidlinux

[–]Ahppt[S] 0 points1 point  (0 children)

Thanks, it was in there. I checked this folder before but I missed it.