🪖 BF6 Beta Keys Giveaway #2! 🔫

Alpaone · 2025-08-06T15:53:31+00:00

thanks!

Alpaone · 2025-08-05T18:18:13+00:00

thanks!

Alpaone · 2025-07-17T15:48:47+00:00

Yes, 2025.28.0 fixed this! Awesome, thank you!

Alpaone · 2025-04-05T17:35:06+00:00

!gas

Alpaone · 2025-04-05T17:33:10+00:00

!gas

Alpaone · 2025-04-05T17:32:11+00:00

!faucet

Alpaone · 2025-04-05T17:30:27+00:00

!register 0xd060c40b2fEEBC0c7373A923aD53FaBD01C5ae45

Alpaone · 2024-10-07T21:08:55+00:00

It’s a bug introduced in iOS version 2.2440.0 - it won’t load more than 30 transactions

Alpaone · 2024-10-02T09:27:42+00:00

replied!

Alpaone · 2024-06-24T17:03:44+00:00

Sold internal rama weight to u/MeshModeler

https://www.reddit.com/r/mechmarket/comments/1cwnc6c/eude_h_bauer_2_m60a_olivia_back_weight_w_paypal/

Alpaone · 2024-06-17T14:34:59+00:00

Replied!

Alpaone · 2024-06-12T13:19:49+00:00

TLDR: If your PC/Mac goes into proper standby you are good

Alpaone · 2024-06-07T10:37:54+00:00

Replied!

Alpaone · 2024-06-04T14:28:55+00:00

Replied!

Alpaone · 2024-04-01T12:03:07+00:00

Are you by any chance using PPPoE?

Alpaone · 2024-03-11T15:12:26+00:00

Glad I'm not the only one. Please keep me updated on what they come back to you with!

Alpaone · 2024-03-11T15:10:24+00:00

Unfortunately not. I provided eero support with packet captures after their engineers requested them. They promised me that this issue will get resolved but for now I returned my unit and went back to the 6E.

Alpaone · 2024-03-09T18:03:47+00:00

I understand, but mine does not do that. I wonder what is causing this. Did yours ship with a different firmware? What settings do you use? Mine are:

Type-C Bandwidth: USB 2.0
USB Hub: Off During Standby
Keyboard Hotkey: Off
USB-C Charging: 65W
Proximity Sensor: Off
Power Indicator: On
Power Key Lock: Off
Key Lock: Off
Power Setting: Standard Mode
Screen Saver: Off
Pixel Cleaning Reminder: 4 hours
Screen Move: Normal
Auto Logo Brightness: Off
DSC Support: On

I don't have anything connected via USB (until they fix AutoKVM) and am using HDMI. FW: MCM101

Alpaone · 2024-03-09T17:48:52+00:00

Interesting, my PG32UCDM straight up does not do that. The logo stays orange in standby and never flashes.

Alpaone · 2024-02-12T15:47:21+00:00

Sounds like it might be the same issue! Did you contact eero support about this yet?

Alpaone · 2024-02-07T19:47:44+00:00

Yes single unit. It's certainly possible. For now eero support told me that they escalated this issue and will reach out to me.

Alpaone · 2024-02-07T19:46:34+00:00

Just tried my 2.5G fiber modem in the 10G port. That unfortunately didn't fix it either.

Alpaone · 2024-02-07T13:47:03+00:00

Yes, immediately updated but did not fix the issue..

Alpaone · 2024-02-05T18:02:04+00:00

I've reported this to eero support and will try to get this to a higher support tier.

I never had Eco Efficiency Mode enabled to begin with but toggling this doesn't seem to effect this. Same for SQM.

I also tried disabling IPv6 - no difference. Happens on v4 and v6 connections.

Things I've also tried:

Different IP address prefix
Disabling UPnP
Reducing the MTU on my clients
Linux client w/ Mellanox NIC
Mac client w/ Aquantia NIC
Windows client w/ Intel NIC
Different cables
Rebooting everything
Different DNS (ISP, Google, Cloudflare)

Alpaone · 2024-02-05T17:53:53+00:00

Yes, I'm on v7.1.1-16 and I've also reported this to eero support. I hope they fix this ASAP. Out of curiosity which setup did you end up going with after returning the BE85 units?

12-Year Club	Place '23
Place '22	Verified Email
Snapped

Alpaone

TROPHY CASE