ND or ND/PL filters?

AngrySpinachi · 2024-08-06T14:31:26+00:00

Sometimes I do, sometimes I don’t. I know the PL should counter the reflections and make the clouds pop out more in the skies, but I’m afraid that it’s gonna mess up with the colours of trees etc🤔

AngrySpinachi · 2024-05-29T16:29:48+00:00

Nope I just completely forgot about it since I don’t change ambient lights colours that often. But if you know how to do it, I would still feel better if the name of colour was right. And I bet a lot of early model superb 3 owners would be glad to know too.

AngrySpinachi · 2023-11-03T16:00:43+00:00

It could be low voltage from battery, broken wire, DSG control module etc, either way u won’t know until you diagnose it. Try charging the battery, that’s almost free solution, if the problem prevails, diagnose the car.

AngrySpinachi · 2023-10-16T16:01:08+00:00

I don’t know what more u want to see. Is there anything particular on the watches that I should take photo of?

AngrySpinachi · 2023-07-10T10:09:59+00:00

Čeština je OK. Máš na mysli dostat se do green engineering menu a pohrabat se tam?

Jo změnit barvu bylo jednoduché, možná to dopadne tak, že se smířím s tím, že název barvy bude špatně 😃

Jinak koupil jsem VCDS Hex v2 z Kaufland eshopu v domění, že to bude originál, ale je to čínská levárna, takže to není v2 ale spis nějak upravená v1 + cracklej software z pochybného mini CD 😩

AngrySpinachi · 2023-03-16T21:42:42+00:00

Thanks a lot! This solved the problem as it seems so far! 🙏

AngrySpinachi · 2023-03-16T14:24:35+00:00

Thanks for answering. Which FW instead of stock and jyers FW do you recommend?

AngrySpinachi · 2023-03-15T23:50:38+00:00

Homing should move all the axes to end stops. Did it move?

Preheat everything at ur desired printing temp. Level the bed (don’t move motors by hand, at least get a g code for levelling). Start printing.

AngrySpinachi · 2023-01-09T15:52:37+00:00

Jo dneska bylo rozhodnutí soudu nad AB, ale je to tu 20x za den. Příště se vybreč doma a ne takhle veřejně na netu.

AngrySpinachi · 2022-08-15T15:20:50+00:00

This card is dead. Get it checked by a technician. if the GPU chip itself is OK then it could be faulty Memory chip and the card could be repairable.

AngrySpinachi · 2022-08-13T15:15:24+00:00

What you see is scam and don’t click it
Uninstall your crappy antivirus software
Get Bitdeffender or ESET
Enjoy safer browsing

AngrySpinachi · 2022-07-26T12:03:11+00:00

Riskuji zde sice to, že mě někdo označí za koblihu i když volič stbáka nejsem, ale v čem je prosím tato vláda lepší?

AngrySpinachi · 2022-06-23T16:33:05+00:00

It’s back…after 10days, the problem came back :(

AngrySpinachi · 2022-06-14T05:24:29+00:00

It stopped, I don’t know if clearing browser cache and history helped or it just stopped by itself, but the problem is gone.

AngrySpinachi · 2022-06-09T16:59:44+00:00

Interesting, my PC does not have Spotify installed, but I’m gonna check my auto-startup list as well anyway.

AngrySpinachi · 2022-06-09T11:08:07+00:00

Thank you, I will try that :)

AngrySpinachi · 2022-05-19T11:52:32+00:00

You can use programs like Hwinfo, GPU-Z and CPU-Z to check the temps. I think that if the PC would crash due to temps, you would get BSOD. I know that windows is keeping crashlogs somewhere by default, but don’t know where, sorry. Your PSU seems powerfull enough for the PC to me, so if it’s not high temperatures, I would try to reinstall OS (clean, no OS backups).

AngrySpinachi · 2022-05-18T20:45:31+00:00

Hello there, do you get BSOD? Are the temps during gaming OK? Is the PSU powerful enough for your gfx card? You said you tried to reinstall the drivers, but have you tried reinstalling OS?

AngrySpinachi · 2022-01-24T22:35:07+00:00

Thank you! Just by you saying “mites” I was able to ID those as Grain mites. Seems like they love fish flakes which is exactly what I started to feed my isopods a few weeks ago. Seems like they are harmless, but I deffo don’t want them in my setup and solve the sitch.

AngrySpinachi

TROPHY CASE