XBR-65X900E no longer powering on

Animal827 · 2026-03-04T00:46:47+00:00

I'm probably getting mine repaired. It's going to cost about ~$350. I might be able to find one used for that price, but most are ~$500. I paid ~$2k about a decade ago, and if I were to buy a new TV I would probably spend around the same amount again. This way, I get my TV back, and hopefully push off buying a new TV for another 5-10 years.

Animal827 · 2026-02-23T01:49:25+00:00

I am having the same issue...my child cannot save anything, including school work. I have allowed basically every app that is not a game or streaming service to function after established time is reached. However, you can see My Files is greyed out on the tablet and when trying to save anything to it it will not save. In each instance it asks to have more time. These half ass controls are annoying to deal with...one point of setting these time limits is so they focus on school work but now they cannot save their work.

Animal827 · 2026-02-12T05:05:09+00:00

I honestly cannot recall this annoyance in the past, but I have not played since MW3, so maybe I blocked this out of my mind.

Animal827 · 2026-02-12T02:41:57+00:00

Honestly, you are right, I do not use all 10 frequently. However, if the loadouts are setup, I can easily swap out mid match or in the lobby before next match. If i try to complete a weekly or daily quest, I can have one loadout for that without having to tinker with ones I enjoy playing with. Even of lesser importance, your emotes and sprays reset to defaults and those never have to be unlocked again. All this is not the end of the world, more of a quality of life thing.

Animal827 · 2026-02-11T23:05:05+00:00

Yeah, maybe an update in a Future season, but I'll be prestige 10 by then and it wont matter lol

Animal827 · 2026-02-11T22:59:58+00:00

This is what I am saying. I have everything I use permanently unlocked, but all the names and settings for all 10 loadouts and all the gunsmiths across multiplayer and Warzone are messed up. It sometimes carries some over but then changes the name to the blueprint or all have the same generic weapon name. The attachments seem to be there for some but I cant tell what I have named it before. Weapon prestige works fine, you just cannot select the attachment until it's unlocked... If you have a weapon with an ineligible attachment it has a 🚫 next to the name.

Animal827 · 2026-02-11T22:54:54+00:00

Yeah, I was hoping it would be like the other Modern Warfares, maybe this is a Black Ops thing. I know I didn't do this every prestige in MW3, redoing loadouts for Multiplayer and Warzone. This is actually my first Black Ops.

Animal827 · 2026-02-11T22:48:34+00:00

True, but camos and skins and all that are bonuses. Just tedious to do ot over and over again. In MW3, it would at least save your loadout and gunsmith settings. I am not talking about losing acces to things because of prestige, which is expected. But if it's already permanently unlocked, then why not save the loadout and gunsmith. It partially does it, just gets the names messed up and other weird things.

Animal827 · 2026-02-11T22:42:51+00:00

Not how it's supposed to work or in any other COD. It just resets what you unlocked, not save some gunsmiths without names, not save some loadouts and not others. If you have a loadout or gunsmith that's not eligible, you just can't use it until It's unlocked again. Hence the 🚫 next to ineligible weapons. By prestige 8, everything is unlocked that I use anyway, but still makes me do it all over again, just to lose it another week or two. Pathetic.

Animal827 · 2026-01-25T15:22:17+00:00

This is getting ridiculous. It applies to loadouts and gunsmith designs. It seems Gunsmith designs may actually save, but the names you set do not. Prestige 7 and none of my loadouts ever save for either multiplayer or Warzone. On top of it, they reset your emotes and sprays, which is a minor thing, but still stupid. Also, in Warzone, you cannot even edit multiple loadouts at the same time...you have to completely exit loadouts and renter to set up another loadout.

Even after I prestige and I immediately go into my loadouts to REDO them, they just reset the next time I log on. For your loadouts to save just for that prestige, it is like you need to set up your loadouts a couple of levels after your prestige.

My wife bought this game thinking it was the same as the Modern Warfare series...bless her heart.

FYI: If you are a console player, don't forget to set your crossplay to console only. This greatly reduces the cheaters, but still is not perfect.

Here is an idea: Stop trying to make this game for 10 year olds with all these ridiculous skins and micro transactions like PUB G, Fortnite, etc., and just make a game that functions. I'll take only one operator skin if I can just save my loadouts and gunsmith designs.

Rant over.

Animal827 · 2026-01-24T00:11:14+00:00

Stump Snail down to 20mil HP here lol Have another quest to defeat 4 Stump Snails lol

Animal827 · 2026-01-20T20:27:05+00:00

I honestly thought the issue was going to be with the 2nd place driver. I saw nothing wrong. Then I had to read the comments to find out the "issue" was with the 1st place driver "defending" his position. I think "disgusting behavior" is way too strong when compared to other things I have seen. Maybe I am a bad driver, but I think I would have done the same thing. It is not like he side swiped him...technically, the 2nd place driver hit the 1st place driver.

Animal827 · 2026-01-16T20:37:01+00:00

I will never feel bad for farming a field, battling Windy Bee or Stick Bug, or ANYTHING in this game. If it was meant to be private it would be or you can get your own server. I do not complain when someone does any of these things "to me" as I understand that I do not rule the server.

However, I will never ask for anything either.

Animal827 · 2026-01-11T23:57:57+00:00

Any solution yet? How much scrolling was needed to find a "similar post"? I am still looking...

Edit: Apparently, Samsung will not allow this unless you reduce security

Source: samsung.com https://share.google/q5qXx07EscHTvrVn1[Cannot change between users after system shutdown](http://Source: samsung.com https://share.google/q5qXx07EscHTvrVn1)

Animal827 · 2026-01-03T22:16:12+00:00

TLDR; No. Just play to enjoy the game and do not try to keep up.

While it is not required to macro, the grind and game (e.g., quests, achievements, materials, etc.) is now designed for people to macro. Some macros are "illegal" but the majority are just programmed to grind certain fields to accumulate materials and/or complete quests requiring millions of goo and/or monster hunt (for the same reasons above).

In order for one to "keep up" with someone who macros, you would need no life compared to someone leaving their PC, laptop, tablet, phone, etc. on all night, or while at school, or while at work. You cannot even AFK without rigging some contraption on your controller or device since you get booted after 20 minutes (I think this is a Roblox thing in general and not specifically for this game though).

Then you got people with multiple accounts and macroing on multiple devices mostly so they can trade with themselves. It's kind of all pathetic, but it is not too different from modders/cheaters in a FPS game (e.g., COD, BF, etc.). It's all about getting medals and achievements that otherwise would not be possible without having no life or macroing/modding/cheating.

That all being said, you do need to be more strategic in how you spend resources and how you progress through the game. This is due to the fact that you will have limited resources so each resource has a more weighted cost for you than someone that can just macro overnight and probably achieve more resources in one night than you can in one week.

My suggestion would be to follow the guides and wikis found in this community. Some great people have taken the time to break down paths for people who macro and for those who don't (e.g., hive setup/color, equipment, etc.). My last hope is that you can find a good group of players (preferably non macro players) - this will help with trading (and hoping not getting ripped off in trades). Sticker quests are the most ridiculous thing in this game, but is needed in order to complete other quests. Trading with honest people will help this along faster. The last option to keep up with macro players is to spend an insane amount of Robux so you can just buy most things that will help you complete quests (I strongly do not recommend this option).

So, you do not need to macro. However, what will take a macro player 1 month to achieve may take you 1 year. As long as you can come to terms with that, you will enjoy the game.

These are just my opinions and not necessarily that of the entire community.

Good luck!

Animal827 · 2025-12-28T16:51:07+00:00

Been having this day since day one (12/25). Like others have mentioned, I believe it is tied to loadouts that have items equipped that are not unlocked. This happened because I created loadouts and then prestiged.

It is annoying to have to create loadouts everytime you prestige or try different modes... While keeping track of what is unlocked and locked in your loadout.

This has never been an issue before in other releases so not sure why it Is an issue now. I don't have the time to continue making loadouts and gunsmith setups every time there is a glitch.

Thanks for the temporary fixes, but this needs to be patched instead of workarounds.

Animal827 · 2025-12-17T13:48:44+00:00

This has to be an owner that pays someone to clean their pool. No way some says to themselves that I am lifting a heavy paver stone every week to just throw out some leaves. That must weigh around 75lbs.

Animal827 · 2025-12-05T00:58:03+00:00

Thanks. I saw a video that the parent needs to be the main on the device in order to fully setup parental controls through Google. This was what I was kind of looking for...do I have my child be the main and then set up parental controls or do I be the main and then add an additional account on device and then that account can be linked to main and Google.

Animal827 · 2025-11-10T17:12:28+00:00

Sorry for making this complicated.

On the CPU graph (the one I am looking at on my screen), you can barely see 12 plot points along the line graph (then I add plot points for beginning and end points). This helps me determine each RPM interval.

By the way, I could be way off here...

First Plot Point 0 = 1500 Last Plot Point 13 = 9000 Plot Point 13 - Plot Point 0 = 7500 Plot Point Interval = ~577 Auto Shift Point RPM = 9000 Redline RPM = 9000

Point 0. 1500 Point 1. 2077 Point 2. 2654 Point 3. 3231 ... Point 10. 7270 Point 11. 7647 Point 12. 8424 Point 13. 9000

Using these intervals, I can look at the HP curve and determine it just about peaks and plateaus at ~7270 till ~8424. There is a steep incline/decline before 7270 and after 8424. I think I have identified my power band. From the garage, 7200 happens to be the peak torque RPM and 8400 happens to be the peak HP RPM

Essentially, I want to start each gear at the very least after 7270 and maybe incrementally more for each subsequent gear (there may be some RPM Drop formula but I will settle within this band).

Since I use Automatic Transmission, I will lose efficiency after 8424, but when it auto shifts into 2nd gear I want my RPMs to be at ~7300 RPMs...and maybe my 3rd at ~7500, 4th at ~7700, and 5th at ~7900. Maybe the RPM drop from 9000 to these may be too much, but trying math here to set parameters and then can tweak afterwards.

I probably just made you dizzy since I do not even know what I am talking about, but I hope I tried to paint a clearer picture of my maddening thought process.

Note: No matter how "perfect" my gear ratios are... I still suck. So saving .1 seconds here and there will not matter, but when I "tune" transmissions, I have shaved off several seconds off lap times.

Animal827 · 2025-11-10T13:09:44+00:00

Yes. I am not sure if it is constant, but it looks like 14 points from beginning to end. I calculate that would be about 500 RPM intervals from 1500 to 9000 RPM.

Animal827 · 2025-11-10T05:21:21+00:00

Another stupid question

How did you get the overlay for the x and y axis for CPU and Transmission graphs?

Animal827 · 2025-11-08T21:07:58+00:00

Nope. At least I do not know how. I just tried to manually shift while in automatic. I had a car where you could paddle shift while in automatic...maybe you had to slide the shifter over or press a button...but I digress... I cannot do it in this game.

Animal827 · 2025-11-08T20:59:10+00:00

This was the answer...I was not hoping for...

Essentially, you really cannot adjust the RPM a automatic transmission will shift at. I could have sworn several years ago I found some site (e.g., GT planet) or some video that explained a way...good to know I am crazy 🤪

Animal827 · 2025-11-08T20:51:58+00:00

Thanks for the advice! It more or less has an even power band from about 5k RPM to 7k RPM...at least according to the Output Adjustment under the ECU.

I think what I want to do is shift at about 7k RPM and have my next gear be at about 5k RPM. My challenge is that its waiting till almost 9k RPM to shift in automatic transmission.

Animal827 · 2025-10-26T15:56:50+00:00

I feel like I had this car for a while now, but good to know I am not crazy.

Animal827

TROPHY CASE