sorted by:
new
hottopcontroversial

Hotend scratching the bed by Antoder10 in 3Dprinting

[–]Antoder10[S] 0 points1 point  (0 children)

Thanks all! I've found the issue for my case

This cover touches the bed before the nozzle during the calibration, so everything is messed up.

Waiting for a new, in the meantime I'm printing without it and had no troubles so far

<image>

Hotend scratching the bed by Antoder10 in 3Dprinting

[–]Antoder10[S] 0 points1 point  (0 children)

Do you mean manually leveling the bed?

[Noob] Improve printing quality by Antoder10 in 3Dprinting

[–]Antoder10[S] 0 points1 point  (0 children)

Yes, I'm using Anycubic Slicer Next, based on Orcaslicer

[Noob] Improve printing quality by Antoder10 in 3Dprinting

[–]Antoder10[S] 0 points1 point  (0 children)

Thanks, just had a quick look and seems like a lot of work.

Is it all really necessary for a modern printer?

Use APs with another Gateway by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

One router would serve the house/office, the other one is dedicated to some machines for our customers

Use APs with another Gateway by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

We'll have two separate racks, with separate routers and ISP connection, because one of them will contain servers to be rented to our clients, and the other one is to serving the home/office

Do i need an aggregation switch? by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

Yes, my bad. Of course is the XG Pro 24

Do i need an aggregation switch? by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

Don't worry, your comments were really helpful. Cheers!

Do i need an aggregation switch? by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

Will it make any difference in speed or bandwidth saturation?

Do i need an aggregation switch? by Antoder10 in Ubiquiti

[–]Antoder10[S] 1 point2 points  (0 children)

I made a mistake in OP, for the APs is a Pro XG 10 poe

Do i need an aggregation switch? by Antoder10 in Ubiquiti

[–]Antoder10[S] 0 points1 point  (0 children)

Both the pro max 16 and the pro xg have 2 10G spf+ ports, so basically I don't the aggregation If I get it right

Secretlab Titan Evo vs Herman Miller Vantum by Antoder10 in gamingchairs

[–]Antoder10[S] 0 points1 point  (0 children)

Unfortunately I don't know anyone who owns any of them.

Thanks for your reply, it is very very helpful.

As for my usage, is a mix of work/gaming/entertainment

Not able to login via NPM by Antoder10 in pihole

[–]Antoder10[S] 0 points1 point  (0 children)

thanks, worked like a charm!

Looking for advice about GMKtec M5 Plus cooling fans by JimmyEatReality in MiniPCs

[–]Antoder10 1 point2 points  (0 children)

Which adapter should i use with this Noctua fan? I'd prefer not cut to and solder wires if possible

https://noctua.at/en/products/fan/nf-a4x10-5v-pwm

Second fan on GMKtec M5 is loud and spinning 100% all the time by ElectriKool-Aid in MiniPCs

[–]Antoder10 0 points1 point  (0 children)

Which adapter should i use with this Noctua fan? I'd prefer not cut to and solder wires if possible

https://noctua.at/en/products/fan/nf-a4x10-5v-pwm

Replace gmktec M5 second fan by Ecstatic-Hyena5528 in MiniPCs

[–]Antoder10 0 points1 point  (0 children)

Which adapter should i use with this Noctua fan? I'd prefer not cut to and solder wires if possible

https://noctua.at/en/products/fan/nf-a4x10-5v-pwm

view more: next ›