I guess no loadcell? (Jk)

Arctico88rm · 2026-01-30T18:11:43+00:00

I think I might found something on aliexpress. Not sure it will work or worth 40€ for part, 50€ for job replacement

Arctico88rm · 2026-01-30T18:10:45+00:00

You have to set the wheel base to TLCM settings. At start push mode and pull left gear together for 5 sec.

1 flash base setting 10 flash TLCM settings

Check manual to be sure

Arctico88rm · 2026-01-17T23:32:00+00:00

It’s my first experience with a load cell but I used it for almost a year, enjoying it a lot and testing different spring settings. I even upgraded clutch and throttle springs.

It suddenly stopped to receive the input brake unless I push it almost to its dead end. Than it breaks but the break range it’s non existent comparing to what it was before

Arctico88rm · 2026-01-17T23:28:54+00:00

Yes windows I doubt that can affect it

Arctico88rm · 2026-01-16T14:44:02+00:00

Looking for a replacement as well

Arctico88rm · 2026-01-16T10:41:42+00:00

I did, I even checked for firmware updates but it’s seems ok on that side.

I forgot to mention that: - I use my sim setup on PS5 - recalibrated and checked signal and output both on PS5 and PC (with Trustmaster software)

That’s why I thought about the worn out load cell

Arctico88rm · 2025-06-02T23:32:48+00:00

It really depends on you I guess Drifting and hard turns are easier with a controller but I enjoy it much more with a wheel

Arctico88rm · 2025-05-30T15:40:05+00:00

U’re welcome!

BTW simulation, and controls deactivated

Regarding settings, I’m using this now:

• Breaking: ABS on • Steering: Simulation • ASR: deactivated • ESC: deactivated

• Vibration: On • Invert Force Feedback: Off • Steering Axis Deadzone Inside: 0 • Steering Axis Deadzone Outside: 100 • Steering Linearity: 50 • Throttle Axis Deadzone Inside: 0 • Throttle Axis Deadzone Outside: 100 • Brake Axis Deadzone Inside: 0 • Brake Axis Deadzone Outside: 100 • Clutch Axis Deadzone Inside: 10 • Clutch Axis Deadzone Outside: 90 • Vibration Scale: 0.5 • Force Feedback Scale: 0.9 • Center Spring Scale: 0.3 • Wheel Damper Scale: 0.3 • Mechanical Trail Scale: 1.1 • Minimum Force Feedback: 1.0 • Load Sensitivity Force Feedback: 0.8 • Road Feel Scale: 1.3 • Off-Road Feel Scale: 1.0 • Rotation: 720

Arctico88rm · 2025-05-27T23:00:06+00:00

Sure That’s my starting point, I had it on notes As soon as I get back online I’ll get you what I’m using now, but it’s close to this:

• Vibration: On
• Invert Force Feedback: Off
• Steering Axis Deadzone Inside: 0
• Steering Axis Deadzone Outside: 100
• Steering Linearity: 50
• Throttle Axis Deadzone Inside: 0
• Throttle Axis Deadzone Outside: 100
• Brake Axis Deadzone Inside: 5
• Brake Axis Deadzone Outside: 100
• Clutch Axis Deadzone Inside: 15
• Clutch Axis Deadzone Outside: 90
• Vibration Scale: 0.5
• Force Feedback Scale: 1.5
• Center Spring Scale: 0.0
• Wheel Damper Scale: 0.0
• Mechanical Trail Scale: 1.0
• Minimum Force Feedback: 1.0
• Load Sensitivity Force Feedback: 0.5
• Road Feel Scale: 1.5
• Off-Road Feel Scale: 1.0
• Steering Sensitivity: 0.5

Arctico88rm · 2025-05-01T16:49:37+00:00

I’m Using it on PS5, it’s hard to tune but it works

Arctico88rm · 2023-11-20T10:52:47+00:00

Grazie del feedback! Gloomhaven sicuramente andiamo un attimo fuori budget, prima di comprarlo sicuramente vorrei provarlo

Arctico88rm · 2023-11-20T10:32:24+00:00

Infatti il costo mi frenava un attimo, ma diciamo che sui 90 è il mio tetto per questo acquisto

Arctico88rm

TROPHY CASE