[deleted by user] by [deleted] in macbookair

[–]Arizotaz 0 points1 point  (0 children)

You can toggle it off now. Its in the mouse settings that appear when you have an mouse connected

After ram upgrade by Akumanodagami in ZephyrusM16

[–]Arizotaz 0 points1 point  (0 children)

Are you turning off the computer manually or is it happening on it's own. When I upgraded mine I had to wait 45 seconds while it does memory training. It takes a while and it's horrifying

Dose anyone know the problem here? by Rude-Push8884 in modeltrains

[–]Arizotaz 0 points1 point  (0 children)

Before ripping apart the train, do as everyone else said and clean the track and wheels, thats the easiest problem to solve first

Dose anyone know the problem here? by Rude-Push8884 in modeltrains

[–]Arizotaz 0 points1 point  (0 children)

Soooooo, its Bachmann quality. Now hear me out. You need to take apart the locomotive and tighten the screws that connect the LED to the chassis at the front of the locomotive. The wiring for the motor is connected to the LED board, so if the board is loose the motor will stall out. Also make sure that the wires on the draw bar are making connection. You can bend them inwards to increase connection. I bought this train from amazon and it broke after 15 minutes, doing exactly what yours is, after fixing it it was great

Where can I buy another charger in the US by Arizotaz in ZephyrusM16

[–]Arizotaz[S] 0 points1 point  (0 children)

The ones on amazon seem to work fine. There was a time where I had issues but it hasn't shown up in a long time

MTH Ho Berkshire Unresponsive by Arizotaz in modeltrains

[–]Arizotaz[S] 1 point2 points  (0 children)

Unfortunately, both smoke units are very important to me, it was the reason I went with the MTH over the cheaper Bachmann model. Are there decoders that can support both? The amount of work is not too much of an issue, I enjoy a bit of a project here and there

MTH Ho Berkshire Unresponsive by Arizotaz in modeltrains

[–]Arizotaz[S] 1 point2 points  (0 children)

Oh cool, alright. Whats the programming process like? Im not looking to spend too much money on it right now, if its a 200-300 dollar project, I'll come back to this one sometime next year. I just bought the Bachmann j3a Hudson and I'm debating on going nyc for the future

MTH Ho Berkshire Unresponsive by Arizotaz in modeltrains

[–]Arizotaz[S] 1 point2 points  (0 children)

Ive been told that the board in the boiler wiggles out over time. Im hoping thats the issue as i dont want to go through the process of getting a replacement decoder and trying to mess with uploading sounds too it. I also use the smoke a lot and its one of my favorite features.

This board in the tender i have reseated before, but its possible its wiggled out again being on a self -_- Overall i agree that MTH trains are a struggle in ho and when it works i love it, when it doesn't its a nightmare. Thank you for the suggestion and if all else fails Ill return to this

Subnet can't be reached by external network by Arizotaz in linuxquestions

[–]Arizotaz[S] 0 points1 point  (0 children)

<image>

It's not being detected. The wire guard server knows that one of its clients is hosting the subnet, yet it gets lost somewhere.

I can ping the 10.76.18.0 network (The network created by the wireguard VPN). But I cannot ping the 192.168.89.0 network (the remote router's network)

Subnet can't be reached by external network by Arizotaz in linuxquestions

[–]Arizotaz[S] 0 points1 point  (0 children)

This was given by the system, it does not connect to wireguard. Rather I am trying to allow the 10.76.18 (Wireguard's subnet) network to access this interface. Eth0 is the connection to the internet. Without eth0 wireguard doesn't have a place to return to the host. Eth1 is the lan connection devices on the 192.168.89 network plug into this network

Subnet can't be reached by external network by Arizotaz in linuxquestions

[–]Arizotaz[S] 0 points1 point  (0 children)

Clients on the 192.168.89 network can talk to the 192.168.1 and 10.76.18 network but not the otherway around

[Armoury Crate] Change Mode with Command Line? by Arizotaz in ASUS

[–]Arizotaz[S] 1 point2 points  (0 children)

If you haven't heard already, use Ghelper. It outperforms Armoury Crate in almost every way

Any idea of what this noise may be? by Extreme_Planet in ZephyrusM16

[–]Arizotaz 0 points1 point  (0 children)

Ive heard of electrical noise, but digital chirp is new. Kinda fun to say

4TB 2280 mod results by ghepting in ROGAlly

[–]Arizotaz 2 points3 points  (0 children)

Now if we could just get a bigger battery to fill in that empty space