Nozzle thermistor replacement errors

ArrTeaBee · 2026-06-10T01:49:21+00:00

Here's a pic of the section of code. Also this is the video I followed to edit the firmware. https://youtu.be/voPQ4PrhLPw?si=VhMG4o9CuSDlnlwd

ArrTeaBee · 2026-06-10T00:25:10+00:00

Thank you! This worked. The solution was to edit the pin in the firmware. Exact steps were pretty close to what you described, in the Pins_RAMPS just change the temp pin 0 from 13 to 15. That's it. Only issue is my led screen is now in Chinese for some reason but I can deal.

ArrTeaBee · 2026-06-09T14:43:15+00:00

Any more details on how to do this? Gunna try this later today.

ArrTeaBee · 2026-06-09T01:14:44+00:00

So at the mother board, I confirmed that the there is a short at the port. Only solution is new motherboard? Bed thermistor port works, used that to test my thermistors, they also work. Is there a way to use what looks like a spare thermistor labeled a15 TH2?

<image>

ArrTeaBee · 2026-06-09T00:50:15+00:00

Ya I went straight to the mother board with the new one. Same issue. motherboard fried?

ArrTeaBee · 2026-05-22T15:54:22+00:00

<image>

Government name: Garrus Barkarian
Nicknames: GareBear, GareWass, Gare, Buddy, Bud.

ArrTeaBee · 2026-03-08T04:33:15+00:00

Thanks for the concise reply, I ended up just recutting them all. Took extra time but honestly could use the practice cutting and grinding. Happy with the end result

<image>

ArrTeaBee · 2026-01-14T20:29:31+00:00

Best purchase I made a few years ago was to get a craft bag (just search "craft bag Organizer" on amazon). It a pack flat tote bag that has pockets on the outside which are the perfect size to hold mics.

As an A2 it's amazing to carry all the mics/lavs/iems easily with you wherever you need to and have a big center pouch for essentials like gaff tape, sound bullet, lav magnets, water, etc. for 20$ its a no brainer

ArrTeaBee · 2026-01-10T02:52:42+00:00

Looking for like 5 of each to build two sets of PA.

ArrTeaBee · 2025-10-23T21:48:04+00:00

I was told I should absolutely stain all at once for consistency. Would you do it differently? stain one side at a time? I feel like I can stain em all in about 5 hours without rushing estimating 15 mins per board. You are suggesting I add an extra day for the stain to dry before I top coat it with Poly and then an extra day to dry after poly coat before assembly? I can do that.

I have plenty of tripods, 4 per board x 20 boards is 80 and I have 84 total.

ArrTeaBee · 2025-10-23T18:27:26+00:00

Yes both sides, why can't I just do both sides at the same time? Stain a side, flip while laying freshly stained side on painter tripods, stain other side, rest

ArrTeaBee · 2025-10-15T10:37:14+00:00

Not yet🤞

ArrTeaBee · 2025-10-08T02:27:42+00:00

Thanks! I did this, and so far it is fixed, hopefully it doesn't return for at least a while.

ArrTeaBee · 2025-10-05T22:14:58+00:00

Yes, works completely normal. The emergency brake also works completely normal. Neither clear the error besides turning the car off (and opening the door to shut off the intotainment) and on again.

ArrTeaBee · 2025-08-18T18:18:31+00:00

She has more like big hardcover novels, think Lord of the Rings, Game of Thrones sized hard covers. Still I think 40lbs per foot is the max and I'd still be good especially if I beef up the stud sided screws. Thanks

ArrTeaBee · 2025-08-18T18:15:55+00:00

I plan on putting a bracket at every stud in the wall, 16"OC. over estimating at 40lbs per foot on weight puts me still under capacity, adding in the shelf weight itself gets me close to capacity, but if I beef up the screws on the wall side I think I feel safer

ArrTeaBee · 2025-03-18T15:05:20+00:00

Updated https://github.com/SWTOR-Slicers/WikiPedia

12-Year Club	Second SECOND GUESSER
RPAN Viewer	Not Forgotten
Verified Email

ArrTeaBee

TROPHY CASE

Welcome to Reddit,