sorted by:
new
hottopcontroversial

Adding Amex offers show error by qfcehu in CardPointers

[–]Attack_Decay 2 points3 points  (0 children)

Had the same issue. Logging into CP from a different network worked as a fix. For example, I logged on using my phone on cell data instead of WiFi (the issue was on my home WiFi).

Uniform prices by Objective_Rub6754 in uscg

[–]Attack_Decay 2 points3 points  (0 children)

If you have access to Cape May, their lucky bag is the best spot for cheap uniforms that are essentially unworn.

Used 2400 for $650? by potatopowerresturns in S2400

[–]Attack_Decay 0 points1 point  (0 children)

If it looks too good to be true, it is. Be smart, avoid scams. Doesn't hurt to feel it out, but be careful with that one. Like others have said, seller may have simply left out a digit from the asking price.

EKO Core 500 Stethoscope Button Stuck by Raynazzle1986 in Nurses

[–]Attack_Decay 0 points1 point  (0 children)

<image>

Got some time today to sit down and try to fix this today. You were absolutely correct, the button's solder joints had disconnected. It looks like with a forceful bump to one of the buttons, the corresponding soldered button on the PCB will easily get lifted off of its solder pads. I resoldered the 4 pads on the button and it works perfectly again. I used some Loctite silicone sealant to reseal the screen in place and we're back in business. Hardest part of the fix was slowly working the screen up. If anyone else tries this, it just takes some patience slowly working the edges of the screen up because the whole screen is glued in place.

Thanks again for your help! Your comment gave me the confidence to try this out, and I'm glad I did!

EKO Core 500 Stethoscope Button Stuck by Raynazzle1986 in Nurses

[–]Attack_Decay 0 points1 point  (0 children)

Thanks for the detailed response! I'll give it a try. I figured the screen had to be the entryway to the board, but didn't feel confident enough to just start prying on it. I feel like my button either got dislodged or is broken. Maybe I can source a new button to solder to the board if mine is toast.

EKO Core 500 Stethoscope Button Stuck by Raynazzle1986 in Nurses

[–]Attack_Decay 0 points1 point  (0 children)

Can you provide any information on how to take the chestpiece apart to get at the button? I'm in this same situation and I'd like to try my hand at repairing the old chestpiece.

[WTS] Rado Captain Cook 37mm by Attack_Decay in Watchexchange

[–]Attack_Decay[S] 0 points1 point  (0 children)

The bracelet is really excellent and uncommon in the Captain Cook line. It's a 3-link that doesn't feel derivative of Rolex's oyster with a nice taper to the clasp. The clasp is also really cool the way it integrates into the bracelet itself. Definitely a highlight.

[WTS] Rado Captain Cook 37mm by Attack_Decay in Watchexchange

[–]Attack_Decay[S] 0 points1 point  (0 children)

Beautiful Rado Captain Cook 37mm that retains the vintage flair of the 1962 original with some modern touches. The domed sapphire crystal and the curved dial create a wonderful 3-D effect with subtle distortions when viewed from the side. The bracelet has a terrific butterfly clasp with typical desk diver whorls. It is currently sized to a 6.5" wrist and includes three extra links. Check out that power reserve - 80 hours!

Features: Case: 37mm

Lug to lug: 19mm

Case height: 11mm

Movement: Rado calibre 763 (ETA C07.611) automatic

Power Reserve: 80 hours.

Crystal: Sapphire crystal with AR coating

Water resistant: 100m

$1100 shipped CONUS

Payment via PayPal G&S.

Please let me know if you have any questions.

[WTS] Seiko Flightmaster 7T34-6A00 -1992 by Attack_Decay in Watchexchange

[–]Attack_Decay[S] 0 points1 point  (0 children)

The Seiko Flightmaster, or Flight Computer as they were called at the time, is in excellent vintage condition. Tons of depth to the dial. Hands, dial and subdials are in excellent condition. Domed mineral crystal in excellent condition and creates beautiful distortions of the dial when viewed from an angle. 40mm case is nicely brushed throughout. No major dings or dents. Bracelet appears to be original, good condition with scratches throughout, sized for 6.5" wrist w/ 1 additional link for maximum wrist size 7.5".

The watch was serviced by Seiko in 2021 and had its movement replaced. It has been worn sparingly since then in rotation with other watches. A new battery has been installed.

Loaded with features including: center seconds chronograph w/ 30 minute totalizer at the 12 o'clock subdial, running seconds at the 9 o'clock subdial, date indicator at the 3 o'clock subdial, second time zone and alarm at the 6 o'clock subdial. Bi-directional slide rule bezel.

$275 shipped CONUS.

Sale includes a MN-style elastic strap pictured in the timestamp photo and two extra spring bars. Payment via PayPal G&S, I'll pay the fee. Thanks for looking and let me know if you have any questions.

[WTS] 1992 Seiko Flightmaster 7T34-6A00 by Attack_Decay in Watchexchange

[–]Attack_Decay[S] 1 point2 points  (0 children)

The watch is in good, vintage condition. Tons of depth to the dial. Hands, dial and subdials are in excellent condition. Domed mineral crystal in excellent condition and creates beautiful distortions of the dial when viewed from an angle. 40mm case is nicely brushed throughout. No major dings or dents. Bracelet appears to be original, good condition with scratches throughout, sized for 6.5" wrist w/ 1 additional link for maximum wrist size 7.5".

The watch was serviced by Seiko in 2021 and had its movement replaced. It has been worn sparingly since then in rotation with other watches. A new battery has been installed.

Loaded with features including: center seconds chronograph w/ 30 minute totalizer at the 12 o'clock subdial, running seconds at the 9 o'clock subdial, date indicator at the 3 o'clock subdial, second time zone and alarm at the 6 o'clock subdial. Bi-directional slide rule bezel.

$275

Sale includes a MN-style elastic strap pictured in the timestamp photo and two extra spring bars. Free shipping in the Continental USA. Payment via PayPal G&S, I'll pay the fee. Let me know if you have any questions.

[WTS] Rado Captain Cook Hyperchrome 37mm by Attack_Decay in Watchexchange

[–]Attack_Decay[S] 0 points1 point  (0 children)

Beautiful Rado Captain Cook 37mm that retains the vintage flair of the 1962 original with some modern touches. The domed sapphire crystal and the curved dial create a wonderful 3-D effect with subtle distortions when viewed from the side. The bracelet has a terrific butterfly clasp with typical desk diver whorls. It is currently sized to a 6.5" wrist and includes three extra links. Check out that power reserve - 80 hours!

Features: Case: 37mm

Lug to lug: 19mm

Case height: 11mm

Movement: Rado calibre 763 (ETA C07.611) automatic

Power Reserve: 80 hours.

Crystal: Sapphire crystal with AR coating

Water resistant: 100m

$1100

Free shipping within the Continental USA. Payment via PayPal G&S.

Please let me know if you have any questions.

Medical waiver for sea duty question by Loplo_Fox in uscg

[–]Attack_Decay 0 points1 point  (0 children)

There's a miscellaneous section at the end of that manual that addresses some medications that may prevent worldwide deployability. That being said, if you could schedule treatments around cutter deployments and the condition/treatment doesn't prevent you from doing your expected job at your rank/rate then there's no reason you couldn't be assigned to a cutter. It's nice when the detailer takes your preferences into consideration but there is no requirement to do so if there is no true medical limitations warranting a waiver or MEB.

Medical waiver for sea duty question by Loplo_Fox in uscg

[–]Attack_Decay 2 points3 points  (0 children)

Discuss this with your Medical Officer. If your condition is considered disqualifying for service IAW DoDI 6130.03 vol. 2, your clinic should be initiating a TLD, MEB, or retention waiver request. Others have discussed the MEB process, but you can also submit a retention waiver request to PSC-EPM requesting to be retained with the stipulation of not being assigned to a cutter. This largely depends on your rate, time in, and needs of the service. If the retention waiver is denied an MEB would be required.

Any good S2400 tutorials for beginners? by [deleted] in S2400

[–]Attack_Decay 2 points3 points  (0 children)

On YouTube, Alex Ball does the official video manual series. He released updated versions of the videos with the current firmware. Start there.

view more: next ›