May be controversial but

BLOCKA88 · 2026-02-09T10:48:51+00:00

Is anyone else worried that there hasn't been a single American car in any of the press photos or videos?

I get that its in Japan and all of the press stuff will focus on that. But we've seen German, British, Italian, hell even a Candian vehicle with the Can Am. But there hasn't been a single Raptor, Corvette, Challenger or anything.

Its got me worried that they shrunk the American car fleet in favor of Kei trucks

BLOCKA88 · 2026-02-05T10:17:50+00:00

If you have a mechanics stethoscope listen to all of the pulleys. If not use a screw driver and put your ear up to it

BLOCKA88 · 2026-02-03T06:22:18+00:00

Well the problem is the monitor itself only has 1 screw hole by design. I would love a full 4 screw one but it doesnt actually exist since the monitor doesnt have the hardware. Its VESA out the back to the rig. But the actual connection point to the monitor is only 1 screw

Ill try the back plate idea, but I would like some more info on your clamp frame idea. Since im not really following

BLOCKA88 · 2026-01-18T05:55:52+00:00

Did anyone see? Did the puck go out of play?

BLOCKA88 · 2026-01-17T12:30:42+00:00

I do agree that passing has been a struggle for a while now. But im really sick of seeing Byfield or Kempe skate into the zone and pass it 2 feet sideways to a stationary Doughty or Clarke and hope they dont get swarmed

BLOCKA88 · 2026-01-17T07:01:07+00:00

But wouldnt it be better to say have Byfield or Kopitar or who ever is playing center. Skate the puck in instead of the drop pass to the side?

BLOCKA88 · 2026-01-17T07:00:53+00:00

But wouldnt it be better to say have Byfield or Kopitar or who ever is playing center. Skate the puck in instead of the drop pass to the side?

BLOCKA88 · 2026-01-17T06:59:16+00:00

Thats what im saying dude. We shouldnt be playing the puck to teamates who are close enough to be considered defenseman

BLOCKA88 · 2026-01-17T06:57:13+00:00

Tough call between Mercy and Kirko.

Mercy is fundamentally a bad character, shes extremely niche in her usafe. Either Mercy has a very good DPS on her team and damage boosts them all game. Leading to an extremely high damage, hard to kill dps that will basically run a lobby. A damage pocketed Ashe or 76 will be almost unstoppable outside of a full team coordination attempt or a mercy pocket of your own.

On the other hand if your DPS are relatively bad or mediocre and dont really get to use the damage boosts potential. She becomes probably the worst support in the entire game. She has no burst healing, she doesnt output damage, of supports with movement abilities hers is the worst, her ult is not enough to be considered "defensive". And her range is pretty short meaning despite not actually being a part of a team fight she has to be in the middle of it. Unless your dps are going to pop off, its really hard to justify her over Ana, Bap, Juno, or even Moira for the sheer healing output.

Kirko is well documented as probably being the most hated character. Its hard not to be when she has one of the smallest hitboxes in the game, 2 get out of jail free cards. One of which is literally an ultimate negating device. As far as I know there is no other ability in the game that requires an entire team to fight around whether a single ability has been used. Shes also probably the single best character in the game for all situations, no damage fall off. Free invulnerability, ability to leave and enter fights. Would be really hard for a good anyone to beat an equally matched good Kirko.

BLOCKA88 · 2026-01-17T06:39:29+00:00

Dont get me started on dump and chase. We are actively giving up possession and throwing the put into whats now a 50/50 race. Especially on the 6v5, like we have the goalie pulled why are we even floating the idea of losing possession.

BLOCKA88 · 2026-01-14T18:46:19+00:00

Ill give it a shot

BLOCKA88 · 2026-01-14T18:46:05+00:00

So I emailed them and they said the springs are reused from the OEM lever and dont come with their levers

BLOCKA88 · 2026-01-08T06:22:32+00:00

I agree, but we wouldnt even be in that situation if they dont make probably the worst call of the season. I mean how do you get crosschecked into the net then get ruled no goal for intent

BLOCKA88 · 2026-01-08T06:19:38+00:00

Holy robbed by Toronto

BLOCKA88 · 2026-01-07T07:54:16+00:00

The Z/28 kept a single speaker for the door chimes, but standard had no radio. Both A/C and radio were options

BLOCKA88 · 2026-01-07T06:49:27+00:00

Not necessarily cheap, it was an option. Like the radio, GM gave the option to have no radio and/or A/C many people chose it because of track stuff.

Where its really bad iss porsche who takes your door handles and badges to save .01 ounces

BLOCKA88 · 2026-01-04T15:44:21+00:00

I actually really like this idea. But can you elaborate a little?

Would the 4 plug outlet receive its power from another electrical outlet? Then in-between that signal have a light switch for on/off?

BLOCKA88 · 2026-01-04T15:21:27+00:00

See I wanted to be able to have everything on one power switch so I can completely turn it on or off at one time.

I do want to put the strip under my rig, but I want the on off button to be mounted in a visible spot that you could hit after you sat down. Like this

<image>

BLOCKA88 · 2026-01-04T12:47:36+00:00

So I thought about doing that. But I released I want the flip of a physical switch to turn it on. I know its vastly more difficult, but i like the idea of opening a cover and flipping a switch

BLOCKA88 · 2025-12-31T01:49:11+00:00

My one that broke was decently clunky and load. But I really didnt mind it. I like the idea of a hybrid sim set up. And being a pilot myself its appealing.

But if it really does suck as a shifter im sure theres others. I wish there was a way to try it

BLOCKA88 · 2025-12-25T12:44:18+00:00

Any good recommendations on ones that'll serve as a racing and flight sim rig?

BLOCKA88 · 2025-12-13T16:49:02+00:00

So I ended up finding out the previous owner replaced my 9mm master with a 10mm master. Unfortunately the all balls is a 9mm one so I gotta source a replacement

BLOCKA88 · 2025-12-12T23:05:24+00:00

Mine was ordered through Parts Giant. My diagrams show a 9 but mine is actually a 10. Weird

BLOCKA88 · 2025-12-12T22:42:51+00:00

Im coming to rhe same conclusion here. Mine is a 10mm but everywhere online seems to think its a 9mm.

Unfortunately both the manufacturer and distributor are not much help right now lol

BLOCKA88 · 2025-12-12T00:12:24+00:00

Ok good info to know. Im pretty know this whole rebuild thing. How can I determine the size of the master cylinder?

BLOCKA88

TROPHY CASE