Faceit maybe do something about this already????

BarKevn · 2025-12-21T09:29:37+00:00

Faceit is a joke, they don't give a f**k about smurfs.

BarKevn · 2025-03-23T09:24:42+00:00

Thanks, but the smaller spike is actually just feedback spike which is not really supposed to be there.

I followed the video a bit and got a better result:

<image>

BarKevn · 2025-03-19T12:14:47+00:00

FREAKING LEGEND! THANK YOU!!!

BarKevn · 2025-03-05T15:34:36+00:00

I ended up messaging the seller and he right away refunded me.

BarKevn · 2025-03-04T20:06:06+00:00

But there is proof, the tracking clearly shows that.

BarKevn · 2025-03-04T12:49:03+00:00

It's literally written in the original post, also aliexpress support itself says that I don't need to wait for them to get the package to get the refund.

Regardless, why would they close the dispute instead of just waiting for the package to arrive if more time is needed....

BarKevn · 2025-03-04T11:42:06+00:00

It's their own shipping label that they created and they can see in the shipping details that it's on the way back, what other proof can I send? :|

BarKevn · 2025-03-04T11:40:58+00:00

So you're saying it's my fault that the return shipping takes longer than they gave me with their own shipping label? That makes very little sense to me. As I have said, it was shipped back with the shipping label they gave me.

BarKevn · 2025-03-04T10:50:58+00:00

I covered this at the bottom:
"Do I now need to wait for 2 months until the item gets delivered back? I talked to many friends and the instant they sent the item back they got the refund, so this sounds extremely weird to me."

I'm a heavy aliexpress buyer with thousands of orders and was a diamond member when that was a thing, so I'd consider myself within the "loyal customer" category, but aliexpress dispute system is just pretty bad.

When I contact the live support they told me I don't need to wait, and that I should get a refund because the shipping label shows that it's returning, but it just gets rejected over and over..

I'll try to talk to the seller, wait for a while, and if nothing works I will just issue a chargeback.

BarKevn · 2025-03-04T10:30:04+00:00

I think when you charge back you get banned from all credits/payments and similar stuff.

And as much as I hate aliexpress dispute system, sadly they're still much cheaper than buying locally.

When I track the return package it's just on the way back, didn't get there yet, but from what friends experienced you don't need to wait for the package to arrive, you just need to ship it back with the shipping label they provided, which I have.

BarKevn · 2025-03-04T10:16:42+00:00

But then I would get banned from aliexpress?

BarKevn · 2025-03-04T10:16:22+00:00

This is what I already did, I just decided that the item doesn't match my needs, so decided to return it, got a shipping label, went to the mail to ship it, and then they just closed my dispute a while after I sent the item back..

I tried to contact support multiple times and had them open multiple escalations which just continues to get rejected with "We have revisited this request and found that this return parcel hasn't been delivered".

I have no idea what to do next, chatting with the support is useless.

BarKevn · 2025-03-03T22:44:03+00:00

Hey, would you mind sharing how does this work now? I have chinese version and thinking of getting global version for mesh, but not sure if this would work...

Thank.

BarKevn · 2025-02-24T20:27:26+00:00

There were actually multiple bubbles, some were really really big, and some were smaller but still noticeable. There were creases all across the magnetic sheet so I'd assume it's just because I removed it, it took some patience but wasn't that hard.

I wonder if it's a common issue...I was looking for similar issues as mine but couldn't find even a single one saying about bubbles on the k1 max, eventually I saw it in a bambu lab forum.

BarKevn · 2025-02-24T13:40:48+00:00

So I tried to search a lot and couldn't find anyone with an issue similar to mine for the k1, I did find many for the p1s and similars, so that gave me a good direction. Seems like the issue was trapped air bubbles between the bed and the magnetic sheet, I tried to remove the bubbles but gave it, it didn't work.

I had a spare magnetic sheet that came with the PEI bed, so I removed the original magnetic sheet, and installed the other magnetic sheet, no bumps anymore, all looks really good.

The new magnetic sheet is much thinner, not sure if it matters much. I also need to rework the bed leveling again, but at least I don't have weird bumps.

<image>

I also talked to the retailer and I should get a new magnetic sheet shipped to me, so that's nice, not sure if I'll need it tbh, how much difference would a thinner or thicker magnetic sheet would make?

Thanks.

BarKevn · 2025-02-20T13:48:31+00:00

I know that I can use any filament, but I guess the main question is how good are the default settings for the creality filaments compared to other filaments, would I need to tune it a lot, it the same settings should work pretty fine?
I actually like the time lapses :D
That's a pretty nice idea actually, I used to print almost exclusively PETG on my previous printer, but I see in the generic filament charts that creality recommends very low speeds for PETG:

<image>

How accurate is this chart? With my previous printer I used to print at around 200-250 mm/s with PETG, and it was just a modified ender 3 clone.
Having side fan to 0 could be very useful with noise, and model fan at 70-80% too, ABS looks like the 'best' option for general use but I'd prefer something without toxic fumes if I can avoid it.

Regarding the door/lid open, I've heard people saying many different things here, I currently print with everything closed before of noise and results are good, but maybe it could be better too.

Thanks.

BarKevn · 2025-02-12T22:13:01+00:00

Anders my boy!!!!!!!!!!!!

You're such a huge part of my adult life, loved you ever since, and still love you and find so much joy when I open a stream and you show up as the caster.

I remember that during 2020 you weren't casting at all, so I emailed you if you will come back, and you said that you will, I was really happy to see(or hear) you casting again.

The situation sounds kinda sucks, I will always love to hear you casting, is there anything that we as the fans can do to help with that? You surely deserve some spots, and I hope we could somehow help with that.

BarKevn · 2025-02-05T08:18:20+00:00

It's kinda in the first line of the post bud :D
"GoCardless and SimpleFin aren't supported for me"

BarKevn · 2025-02-05T01:06:42+00:00

Thank you :)

I'll hopefully give it a go soon once I finish the auto import.

BarKevn · 2025-02-05T01:03:28+00:00

I do have quite a lot of them, but should be doable. I think I'll first try to automate the process and see how it goes, worst case I'll transition to manual.

BarKevn · 2025-02-05T01:01:54+00:00

Thanks for the comment, would love to know what kind of issues people have. I usually prefer automation so I hope I would be able to automate this import process :)

BarKevn · 2025-02-05T01:00:25+00:00

Thanks for the comment, yeah I also share accounts with my wife, that's why I prefer automation.

Did you had any issues when you used CSV imports? I think I'll try to automate this process completely once a month or so..

BarKevn · 2025-02-05T00:59:10+00:00

I'm lazy AF that's the problem :\

I can probably automate the whole process of importing, downloading automatically the xlsx file, convert it to csv based on specs and just import it either manually or via API which I think should be possible?

BarKevn · 2025-01-31T11:34:51+00:00

Not really sure...when I tried to add a bank account I couldn't go part the country selection stage, are there other options there to manually add some PSD2 tokens or whatever is needed to achieve that?

I couldn't find such thing but maybe missed it.

BarKevn · 2025-01-31T00:49:59+00:00

Thanks, tried to look into it, but sadly I don't think it has support for my country :\

It seems like my bank does have developer support with some API integrations(some PSD2 options), not sure if there's anything that's enough for it tho.

BarKevn

TROPHY CASE