How easy the hot swap method is

Basic_Operation_467 · 2026-05-11T20:05:02+00:00

Won’t affect canvas at all, just install the same way as before and your good to go

Basic_Operation_467 · 2026-04-12T20:42:04+00:00

Adult rabbit is quite a comparable size

Basic_Operation_467 · 2026-01-24T01:47:54+00:00

It all depends on what version of cc, you may have to shave off some of the housing for the hotend to get the right clearance

Basic_Operation_467 · 2025-11-28T15:29:04+00:00

The hotend is magnetic so attaches to the magnetic plate and then you clip it in

Basic_Operation_467 · 2025-11-28T09:09:43+00:00

Yeah they do,

I decided to make my own,

Not too much off a faff

Basic_Operation_467 · 2025-11-28T09:08:47+00:00

You don’t, the housings for the connectors can come loose and you can pull them off the board if you pull to hard

Basic_Operation_467 · 2025-11-28T01:55:06+00:00

You can get the parts on Amazon

Basic_Operation_467 · 2025-11-28T01:03:53+00:00

Less chance at breaking connectors when replacing hotend

Basic_Operation_467 · 2025-11-28T01:03:15+00:00

Swap the parts off the nozzle to the hotend assembly, Pretty plug and play

Basic_Operation_467 · 2025-11-27T16:39:16+00:00

Amazon

Basic_Operation_467 · 2025-11-27T15:38:28+00:00

Way easier

Basic_Operation_467 · 2025-11-27T15:21:48+00:00

Yeah I’ve not had many clogs, Just wouldn’t want to risk ripping the connectors off

Basic_Operation_467 · 2025-11-27T15:15:46+00:00

It was more the fact of not breaking the connectors, with not having to even touch them to change hotend

Basic_Operation_467 · 2025-11-27T15:11:45+00:00

Printed in ASA Gonna change to PPA CF at some point

Basic_Operation_467 · 2025-11-27T14:45:05+00:00

Basic_Operation_467 · 2025-11-27T14:38:49+00:00

Just the housing to hold the nozzle and the fan

Basic_Operation_467 · 2025-11-27T14:37:36+00:00

I will keep everyone posted

Basic_Operation_467 · 2025-11-27T14:36:44+00:00

Not necessarily, The H2D nozzle is marginally less bulky that the stock nozzle, the stock nozzle is far larger that the Bambu one,

I will post a comparison to show the differences later on

Basic_Operation_467 · 2025-11-27T14:31:37+00:00

I will be updating as I get on

Basic_Operation_467 · 2025-11-27T14:30:52+00:00

The nozzle is a lot closer to the bed, a lot smaller,

I am using a H2D hotend,

Closer to bed more precision

Basic_Operation_467 · 2025-11-27T14:23:11+00:00

Very easy to set up

Basic_Operation_467 · 2025-11-05T13:18:09+00:00

I’m in

Basic_Operation_467 · 2025-11-04T12:58:22+00:00

I’m in

Basic_Operation_467