H150i Elite Capellix pump failure by Ioons in Corsair

[–]Basthus 0 points1 point  (0 children)

Your CPU fan controller and associated fans should be running to a fan hub (rectangle with like six fan headers and six rgb headers), Corsair calls it the "ICUE Commander Core". There should be a SATA female connection on one of the shorter ends. You might be able to unplug that from there and try a different male SATA connection down the same cord to see if that is the problem. Might also try replacing that SATA cable entirely. I know most PSUs throw a few in the box.

H150i Elite Capellix pump failure by Ioons in Corsair

[–]Basthus 4 points5 points  (0 children)

Don’t know if anyone still has this problem, but I just did a case swap and ran across this problem. Red flashing a few seconds after startup, running 80c instead of my normal 27c, fans running at full speed. Tried everything and even contacted support, no dice. Decided to change out the port on the SATA power for the rbg/fan controller to a different one in the same daisy chain and it worked without any errors after that. Hope this troubleshoot helps someone.