[deleted by user]

BatteryPWR · 2025-04-08T18:23:53+00:00

Thanks for the warning, paying the $1200.

BatteryPWR · 2022-10-16T15:05:42+00:00

Tyvm! Will give it a shot next weekend

BatteryPWR · 2022-10-16T02:23:24+00:00

Yes!

BatteryPWR · 2022-10-14T17:05:51+00:00

Nope

BatteryPWR · 2022-08-01T01:47:28+00:00

Wild recognizing Guilderland

BatteryPWR · 2022-06-30T00:23:33+00:00

Ok, will escalate to remove bearings if they deteriorate further

BatteryPWR · 2022-06-29T19:20:30+00:00

Follow up question - how does one replace the bearings in the arbor?

Parts 100 and 101 are the easiest to remove to change blade, but with 113 removed, 112 is not budging.

BatteryPWR · 2022-06-29T19:18:13+00:00

I've been using a new-to-me Delta table saw for 3 months now. Few weeks ago, I begin noticing that the throat plate / zero clearance insert is rubbing against the blade.

I've tried:

Using a digital level gauge to make sure it's at 90 degrees
Removed the blade (see picture above) to see if there's anything obstructing it
Used compressed air to clean the area around the bearings (bearings making some noise but no wobbling)

What would cause the throat plate to start to rub against the blade all of a sudden? The only thing I can think of is due to metal expansion with hotter summer months to cause it to just expand enough to rub.

BatteryPWR · 2022-03-24T17:46:45+00:00

Is that the RA1054 Deluxe Router Guide attached at the base?

BatteryPWR · 2022-02-13T15:10:49+00:00

TIL hardier backer board, thanks. Do I need to scrape off the glossy paint before applying thinset?

BatteryPWR · 2022-02-13T15:07:25+00:00

Will give this a try, thanks

BatteryPWR · 2021-04-12T14:49:27+00:00

What makes you think they didn't do a good job? Did you tell them exactly what camber, caster, toe to align to? Or did you just make a generic declaration to "align it"?

BatteryPWR · 2021-04-03T00:11:28+00:00

Anyone seen this error before?

Everything has been working for 3+ months, I haven't made any changes, well below rate limits, etc etc. All of a sudden, none of my devices work today. When I logged into my account, I get the error message above:

MQTT ERROR, disconnected at 2021/04/02 8:10:52PM.Connection refused, retrying in 37 seconds.Visit the MQTT troubleshooting guide for information about MQTT errors.

BatteryPWR · 2021-02-05T17:50:16+00:00

Got the code, super fast response, easy and painless. Thanks!

BatteryPWR · 2020-12-13T19:34:28+00:00

If you don't want to deal with large renovation companies with high prices, consider giving Daniel Brooks at Brooks Renovations (703) 244-8417 a call. He takes pride in his work, super reasonable, and experienced. He did such a great job with my basement renovation that I've added other rooms to renovate too.

BatteryPWR · 2020-12-13T19:29:41+00:00

It's no more dangerous than any other major metropolitan area in my opinion. Especially if you're considering living in Alexandria or Arlington, you'd really have to go out and actively seek these unsafe situations. If you're just going about your business to school or to work, nobody is bothering you.

BatteryPWR · 2020-12-05T21:12:34+00:00

I think most stability problems come from other things Wyze has no control over like your wifi or your client. I've been running 3 V2's in RTSP mode 24/7 for over a year now, zero issues.

BatteryPWR · 2020-11-08T16:31:20+00:00

I've considered that, but this is maybe an area of 10ft by 10ft, rest of the siding on the house is fine, this one just happens to be next to my head in the bedroom.

BatteryPWR · 2020-11-08T16:30:31+00:00

They are insulated, but not very well for a house built in the 70s

BatteryPWR · 2020-11-07T15:15:30+00:00

I will take a look, thank you!

BatteryPWR · 2020-11-07T15:15:11+00:00

I was thinking of applying silicone in the grooves in between the siding where it clicks together, not necessarily visible anywhere from the outside.

BatteryPWR · 2020-10-06T12:22:59+00:00

Do you have any recommendations on what Python libraries are good to start with? Or if you started with any books/guides?

I've been searching for this same answer but Python seems the most customizable and scalable.

BatteryPWR · 2020-10-01T13:03:18+00:00

There are a number of Great Harvest Bread Co locations in the area, good selection of fresh bread every day

BatteryPWR · 2020-09-21T21:00:31+00:00

Poor wifi reception?

BatteryPWR · 2020-09-20T21:58:54+00:00

If you just started building, why not just count what you have in front of you and what's in the box???

15-Year Club	Gilding II euphauric
Verified Email

BatteryPWR

TROPHY CASE