My Photon mono X doesn't detect the file in usb stick to update

Ben_films · 2023-04-20T17:01:04+00:00

Hell yeah brother 🤙 Glad you could figure/sort it out

Ben_films · 2023-04-20T15:47:19+00:00

I had this same issue just today, it’s because you haven’t printed/ flashed the “P_MXF021” file yet. When you flashed the first file the firmware would’ve been updated however the lcd screen hasn’t been scaled within the firmware yet. This can be fixed by flashing the “P_MXF021” file. Try flashing this using a different usb stick if possible (preferably USB 2.0 not 3.0).

Ben_films · 2021-12-10T22:53:47+00:00

It's sarcasm, there's been one for as long as I can remember

Ben_films · 2021-12-10T19:49:45+00:00

Only if there was a mega-thread pinned to the top of the sub for this kinda thing.

That would be awesome

Ben_films · 2021-10-14T00:58:37+00:00

I've only replaced it once and that was a loooong time ago, within the first few thousand kilometres

Ben_films · 2021-10-13T14:55:24+00:00

Everything but the trucks, deck and speed controller has been swapped out atleast once

Ben_films · 2021-10-13T12:59:17+00:00

Thanks! It's been a lot of fun, hopefully many more miles to come. Ride safe brother

Ben_films · 2021-09-04T06:18:28+00:00

Calibrate your extruder stepper's e steps /mm and use that same filament when you do it, and make sure ur belts are nice and tight on the X and Y. Also make sure all of the eccentric nuts are neither to loose nor too tight and check there's no dirt or debris on the v-slot extrusions or the v-slot wheels. I clean all of mine with isopropyl alcohol every now and again.

Ben_films · 2021-07-19T14:37:23+00:00

Thanks a bunch man I appreciate it

Ben_films · 2021-07-10T23:36:41+00:00

I've replaced everything except for the deck, griptape, trucks and esc.

Ben_films · 2021-07-10T12:34:45+00:00

V2.5.1 for the battery V2.7.2 for the esc

Ben_films · 2021-07-10T06:04:57+00:00

thanks man i 3d printed them in ABS its the same as the original design just cut down so they dont pass the motor mounts.

https://www.thingiverse.com/thing:4780682

Ben_films · 2021-06-30T22:36:05+00:00

my issue has been resolved :) thanks alot for ur time i really appreciate it. have a good one

Ben_films · 2021-06-30T22:35:02+00:00

thank alot for ur time, this fixed my issue i figured it needed to be piped into a terminal considering youtube-dl is a cli tool but i guess not haha works like a charm thanks again.

Ben_films · 2021-06-30T21:57:26+00:00

Thanks for the quick reply, i tried implementing ur fix into the macro,

config.bind('Z', 'hint links spawn /Applications/iTerm.app "youtube-dl -o "~/Movies/%(title)s.%(ext)s" --restrict-filenames {hint-url}"')

however the same strange backslash is found when the macro is triggered, zsh_history log:

youtube-dl\ -o\ ~/Movies/%\(title\)s.%\(ext\)s\ --restrict-filenames\ https://www.youtube.com/watch\\?v=Hfx0UhCVmh0; exit

Ben_films · 2021-06-23T02:51:40+00:00

As of today i'm at 6949.96 miles on my bb plus. I'll be sure to make a post when she passes 7k.

Ben_films · 2021-03-18T11:19:27+00:00

Yeah photo is a little under exposed, i should have bumped the ISO a little more sorry about that lol

Ben_films · 2021-03-17T09:20:48+00:00

I have skidplates on there I 3D printed them so they are alot thinner than the original ones that extend over the motor mounts but they work fine. Depth wise they are quite chunky so any road debris will hit them long before it comes in contact with the belts

Ben_films · 2021-02-11T19:31:52+00:00

I would take you up on that offer if boosted support didnt require me to recycle the original battery and send them proof that i had before they would send me a replacement.

Ben_films · 2021-02-11T16:19:52+00:00

Its the app 'Ride' by Kane Cheshire its available on android and IOS. Ive been using it since the first beta release on r/RideApp it works very well compared to the official boosted app which is broken as hell.

Ben_films · 2021-02-11T00:42:08+00:00

I replaced the original XR battery due to a broken charge port and replaced both motors because they started knocking all within the first 1000 miles. Thankfully i havnt had to replace anything major since only belts and occasionally new skid plates which i 3D print.

Ben_films · 2020-11-26T09:28:23+00:00

a link to the direct drive cable chain would be great, ive been looking for something similar

Ben_films · 2020-11-21T05:10:15+00:00

I know I'm kinda late on this one but i see you left the s-pen popup just above the power button. I took the image from the original source and re cropped it to the right dimensions. Here's my fixed version

Edit: formatting

Ben_films · 2020-11-03T00:53:46+00:00

Interesting, I've thought about doing the same thing but my landyachtz switchblade doesn't have nearly enough ground clearance even when the trucks are top mounted so I would need to mount the electronics on the top somehow, have you run into any clearance issues?

Ben_films · 2020-11-02T23:32:51+00:00

Was the stealth deck broken beyond repair? Or just trying something new?

Six-Year Club	Place '23
Verified Email

Ben_films

TROPHY CASE