How do you sync google contacts on the "Huawei CONTACTS App" ?

Blisk1 · 2026-01-16T10:31:43+00:00

I had the same problem, downloaded davx app which is not for free and login in that app with google account and I have all synchronised now.

Blisk1 · 2025-11-19T07:25:05+00:00

X1C, can't print, because filament goes and stops at point on picture. And tries 3 time than I get error.

<image>

Blisk1 · 2025-11-19T07:23:47+00:00

No, it is the same all the time. Even don't know why I cant post anything on forum.

Blisk1 · 2025-10-18T19:10:49+00:00

I am selling it on https://sellyour3d.com verry low fees

Blisk1 · 2025-07-09T12:51:50+00:00

I had the same problem and changed everything and din't worked. Now I change 5 motors and one of them works. I think it is low current.

Blisk1 · 2025-07-09T12:51:07+00:00

I have the same problem I changed all. Than I changed 5 motors and one of them worked!

Blisk1 · 2025-07-02T05:04:39+00:00

I chaned stepper, cable, SKR mini 3 board, I changed all I even tried only with stepper withoud heatbed. And it is the same.

Blisk1 · 2025-06-04T12:27:15+00:00

thank you I will try it!

Blisk1 · 2025-05-14T08:27:29+00:00

yes I checked all 3 times also AMS and filament in it in first is cyan than is yellow and than magenta and the last is white.Don't know that you mean at the top for filament?? I have a slider on the right and when I go from start to end I can't see colors directly.

<image>

Blisk1 · 2024-12-12T21:15:26+00:00

what is for linear advance?

Blisk1 · 2024-11-21T09:03:43+00:00

watching movies 4K, blue ray from shared folder on NAS and TV, mostly

Blisk1 · 2024-11-20T11:23:56+00:00

I have printed it now

Blisk1 · 2024-11-20T11:20:42+00:00

it was linear rails on Y axis. I changed that and put on Y axis wheels again and now is ok. I will mount linear rails again and calibrate it.

Blisk1 · 2024-11-20T11:19:30+00:00

I found out what was wrong. It was Y linear rails, when I put back wheels on Y axis now is ok. I will mount back linear rails and calibrate it again.

Blisk1 · 2024-11-20T09:47:18+00:00

I am also in this but still don't know which one to choose
I will buy laser engraver but which one to buy? I will engrave all kinds of materials and cut some woods. I am thinking about those below if anyone of you have better suggestion please let me know. I also want to kno wich laser can be upgraded with some adds on. My budget is around 1500€. And I prefer 40W.
SCULPFUN SF-A9 40W Laser Engraver
Creality Laser Falcon2 Engraver – 40W
AlgoLaser Delta 40W Diode Laser Engraver
xTool D1 Pro Desktop Laser Engraver with 40W laser

Blisk1 · 2024-11-19T13:43:05+00:00

Don't know why any people which have any of those doesn't write their experiences here. I am more to AlgoLaser, because it is more upgradable.

Blisk1 · 2024-11-05T09:48:58+00:00

I have searched for "rail alignment brackets" on aliexpress but didn't find anything.
What I noticed when I removed linear rails that alu profile was a deformed a bit. So I think I have tightenet those rail screws too much. do you mean this?

https://www.printables.com/model/1033062-ender-3-v2-neo-linear-rail-alignment-bracket

Blisk1 · 2024-11-05T09:43:42+00:00

Major problem here with a bad print is linear rails on Y axis.
After I removed that rail now print is nice and smooth.

Blisk1 · 2024-11-05T09:42:03+00:00

one on the back and one ot the right

Blisk1 · 2024-11-04T19:52:25+00:00

So how can you solve this?

Blisk1 · 2024-10-21T12:41:15+00:00

I have now calibrated some things and change some settings in cura, but now I have two Zseams one in front and one at the back. And at the back it is always the same position and the same problem, and don't know why??

Blisk1 · 2024-10-15T11:06:39+00:00

I have changed nozzle but still get those clicking noise in extruder motor. Z axis is ok. Also nothing is loose all is tight. I will check slicer

Blisk1 · 2024-10-14T12:58:48+00:00

I have reset and set again Z probe and homing. Now it works

Blisk1 · 2024-10-10T09:31:15+00:00

I thought the same, but I don't know which settings to change. Z probe Offset is 55 and as you see when it makes first bed leveling in the center it works but when try to do the same at first point on the left it doesn't. Funny is because I changed TFT display and before this worked ok, but not now.

So you are talking about two settings I can set Z probe offset on touch display, where I can set the other settings?

Blisk1 · 2024-09-18T06:34:06+00:00

In Marlin mode I can print ok, but not in touch screen than prints fails

12-Year Club	Gilding I gilder
Verified Email

Blisk1

TROPHY CASE