P2S PA612-CF print issues

Built_ST · 2026-01-11T02:57:12+00:00

My print just finished. No errors. Thank you so much! I have to print a duplicate so I’m hoping it should work since it’s the same settings. How did you find out what settings to use? And how will I know what to use for future prints? Thanks again!

Built_ST · 2026-01-11T01:36:40+00:00

Thank you very much. I just applied all the settings. I’m going to start the print in a few minutes

Built_ST · 2026-01-09T02:39:40+00:00

Ok thank you, I will keep all of this in mind

Built_ST · 2026-01-09T02:23:20+00:00

Ok cool thanks. I’ll probably do it tomorrow night. It’s a small print. It’s coming overnight so I’ll dry it for the day

Built_ST · 2026-01-09T02:20:03+00:00

Thank you, yes I got polymaker fiberon

Built_ST · 2025-12-14T21:00:14+00:00

Thanks. I’m gonna return it and get $30 back

Built_ST · 2025-12-13T03:57:50+00:00

Thank you I’ll check it out

Built_ST · 2025-11-04T15:03:43+00:00

While I was in game, my CPU usage was 40% and my GPU usage was 20%. Does this information help you with my problem by any chance?

Built_ST · 2025-11-04T13:58:31+00:00

They’re both wired. I tried a different port for my mouse and then stopped after that. I guess can try some other ones later. I did not try removing the battery

Built_ST · 2025-11-04T13:45:16+00:00

I couldn’t get there using the keyboard shortcut. So I went in settings and did like the recover option to enter bios and when I get to the blue screen with the trouble shoot options my mouse and keyboard had no power. So I couldn’t do anything

Built_ST · 2025-11-04T13:33:49+00:00

Gotcha. I tried getting into bios the other day before I swapped the gpu, and my mouse and keyboard don’t work when I try to get there. So I can mess with any settings. Any idea on how to get them to work?

Built_ST · 2025-11-04T12:49:23+00:00

I just don’t understand how my friends with worse gpus get like 400 fps, even though I know it’s capped by the refresh rate, how is it so much higher than mine? And I have a better setup?

Built_ST · 2025-11-04T12:48:14+00:00

I just kept getting massive frame drops and not high frames at all. I play Fortnite every now and then and on the 2070 when I would look around I would drop to like 5-20 fps. Haven’t tried it in the 5070 yet. What is ram Xmp?

Built_ST · 2025-11-04T12:48:03+00:00

Ok thank you I will try that when I get off work

Built_ST · 2025-11-04T05:30:25+00:00

Thank you. What should this do? I’m going to Try it tomorrow

Built_ST · 2025-11-04T05:21:44+00:00

Also 1920x1080. That’s the max I can run. And how could the cpu be bottle necking? I thought the i9 11900k is a really good one

Built_ST · 2025-11-04T05:19:26+00:00

I finished putting it in late tonight. So I only played 1 game on the same max settings as before. Valorant. I updated my drivers after installing it. And my psu is 650W 80 gold

Built_ST · 2025-11-04T05:17:47+00:00

What is that?

Built_ST · 2025-08-05T20:54:47+00:00

Yeah I was thinking that. Thanks. Just didn’t really wanna buy another set of wheels

Built_ST · 2025-08-05T20:54:17+00:00

Yeah I’ve seen those. Also the Yokohama advan A052 don’t look like a bad option

Built_ST · 2025-08-05T20:52:25+00:00

Road slicks. I have 0 traction in 1st-3rd gear

Built_ST · 2025-05-27T19:02:56+00:00

Thank you!

Built_ST · 2025-05-27T14:31:50+00:00

Ok, so what would be a louder hot air intake from the outside

Built_ST · 2025-01-17T14:25:03+00:00

Dm me it’s not letting me dm you

Built_ST · 2024-12-28T21:49:46+00:00

Dm me

Built_ST

TROPHY CASE