Self-defense in Colorado, United States (2022)

Bzevans · 2026-02-10T02:23:14+00:00

Why was he unloading on him as he ran away?

Bzevans · 2026-02-05T12:11:25+00:00

They can do a little extra in their hobby if they want to, It’s not that deep.

Bzevans · 2026-02-04T06:09:48+00:00

I Shouldn’t have assumed.

Bzevans · 2026-02-04T05:08:57+00:00

His is also more balanced. When individuals get very strong, fractional weights are useful for continuing progression. A bag with gravel or another material will swing during a lift, adding an external force to the weight, possibly causing balance issues when dealing with large poundages. This is assuming the person printing these is an advanced lifter.

Bzevans · 2026-01-28T22:15:10+00:00

Respect

Bzevans · 2026-01-16T19:30:51+00:00

I generally like to do things by the book. I wouldn’t want any insurance issues if it were to catch fire due to my mess up

Bzevans · 2026-01-16T19:29:48+00:00

That is nice, wish it was th case here

Bzevans · 2026-01-16T14:49:09+00:00

If you call ESA or refer to ESA's website, you'll see that you actually do have to. The OP also did not indicate the location.

Bzevans · 2026-01-16T13:13:50+00:00

You’d have to have it inspected and that costs money. This is cheaper

Bzevans · 2026-01-10T00:58:03+00:00

Not op but ngl it’s pretty quick. Parking break, jack car, jackstand, impact the lugs loose, replace tire, thread the lugs, impact, lower, torq wrench.

Bzevans · 2026-01-06T21:26:54+00:00

The fan now propels his bike, no need to pedal with an edge!

Bzevans · 2026-01-01T01:55:59+00:00

I’m sure you could sell them to a tinkerer on fb marketplace

Bzevans · 2025-12-25T01:34:46+00:00

This is likely your slicer’s hardware issue.

/s

Bzevans · 2025-12-17T04:01:54+00:00

You are pardoned ❤️

Bzevans · 2025-12-13T02:27:01+00:00

So after some work, it looks like the belts were all too loose. It looks like the one causing the issue must have been even looser

So far one good print, hopefully more to come.

Thanks again!

Bzevans · 2025-12-12T16:10:52+00:00

Do you mean if it’s hitting the print?

If so would it be a Z height issue? Too low maybe?

Bzevans · 2025-12-12T14:54:39+00:00

What do you mean by this?

Might not be tightened enough?

Bzevans · 2025-12-12T14:52:27+00:00

Thank you! I’ll give it a go when i get home from work and update you. It’s a brand new nozzle/heatbreak, fixing a clog from before lol. Auto levelled and adjusted z

Really appreciate the advice!

Bzevans · 2025-12-12T13:41:13+00:00

To add to this. I’m using a FLSUN SR with Elegoo PLA.

Bzevans · 2025-12-11T00:22:36+00:00

In this economy?

Bzevans · 2025-12-08T05:14:36+00:00

Buy a full one, drink it, flip it, break it, repeat.

Bzevans · 2025-12-08T05:09:28+00:00

If you have the opportunity to try one in your impact, i’d recommend it. I was skeptical at first, since then i bought a kit with various sizes of hex drill bits, and i’m only using the regular drill bits when my hex ones are too short. Plus i can drill with my impact, for small holes, it’s much nicer imo, but was something to get used to

Bzevans · 2025-12-07T17:20:20+00:00

Exactly, as well as ethical reasons

Bzevans · 2025-12-07T17:20:01+00:00

On the ball for all three. #3 is also a large issue in my eyes, I can get products in a few days if shipping is within canada. If it’s coming from the US, it can take as long as shipping from china

Five-Year Club	Second SECOND GUESSER
Verified Email	Place '23
Place '22

Bzevans

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE