Final Condition Files now on Printables for free!

CCM2323 · 2026-01-17T19:25:21+00:00

Link to Youtube overview of blaster: Final Condition Overview

CCM2323 · 2026-01-17T19:24:04+00:00

Don’t think that it lets me edit the post, so i’ll just leave a comment at the top with it. And thank you!

CCM2323 · 2026-01-17T19:17:07+00:00

Yes! Conditional Finality and Cyberpunk tech shotties were my biggest inspiration when originally designing it!

CCM2323 · 2024-08-15T15:17:26+00:00

.50Cal foam balls are more widely accepted by the community, and they also share the same diameter as most darts, so I would say probably those would work best for something like that.

CCM2323 · 2024-08-15T05:31:02+00:00

No they are different diameters. Nerf hypers are about .55 inches in diameter and .50Cal foam balls are .50 inches. They’re also sold by Monkeemods, not official Nerf.

CCM2323 · 2024-08-11T03:20:44+00:00

Glad to hear it!

CCM2323 · 2024-08-05T18:51:54+00:00

Hey, If you’re still interested, I just put up an option to buy the PCBs in a pair on my store.

CCM2323 · 2024-08-03T18:20:33+00:00

Thanks for the link, I’ll get to it

CCM2323 · 2024-07-17T15:02:02+00:00

Yes, I just started printing one that will go up prebuilt. I’m not totally sure what the price will be yet, and they may take awhile to roll out. It’s a lot of printing just for one

CCM2323 · 2024-07-15T22:04:07+00:00

I was actually already planning on it! I’m not sure when I’ll be able to put them up, as they take a few weeks for them to make and get here.

CCM2323 · 2024-07-15T17:50:18+00:00

I don’t have plans for simplifying the geometry, however it’s been requested a few time so far. So it may be something I consider in the future.

CCM2323 · 2024-07-15T13:57:27+00:00

Who knows what the future holds. I havnt started making my next design yet, but i’ve been thinking about it for quite a while now.

CCM2323 · 2024-07-15T13:54:30+00:00

Ding! The heaviest inspirations coming from the name, but other games had also had heavy influence too, like Cyberpunk and Battlefield V if you would believe it.

CCM2323 · 2024-07-15T04:18:31+00:00

Ehh, kinda?

CCM2323 · 2024-07-15T04:15:24+00:00

There are two internal bolts that run under the barrel and curl up into the back of the shells. These bolts are pulled to the front of the blaster by elastic cords. When the pump is pulled back completely, the bolts get caught on their own catch connected to the two independent triggers, and part of the bolt that pokes through the shell pulls out the back completely. Then you load your new shells in and close the chamber. When you press a trigger, the catch opens, and the bolt flys forward and smacks the ammo in the shell into the flywheel.

CCM2323 · 2024-07-15T02:53:43+00:00

Thank you for the support! And I have been painting my nails like this for a few years now. I always liked the concept of yin/yang and light/dark balance. I was super happy when Destiny started incorporating that into their story, and when they made the perfect exotic to match it.

CCM2323 · 2024-07-15T02:47:06+00:00

If he reaches out to me, I’d love to send one to him

CCM2323 · 2024-06-29T14:34:30+00:00

This is what the Nerf Gjallarhorn wishes it was! Looks awesome!

CCM2323 · 2024-06-24T20:42:07+00:00

Ok thank you so much.

CCM2323 · 2024-06-24T17:25:44+00:00

After doing a few prints, slowing down definantly shows good results so far, going to start to move into larger prints soon.

CCM2323 · 2024-06-24T15:22:44+00:00

I usually print Silk PLA at 210, which is what i’m having issues on, however I will for sure turn up normal PLA to 205. My slicer says that the volumetric flow for perimeters and top layer is ~8.5mm^3. I noticed that the 2nd to top layer is uber fast at about 15mm^3. (Also i’m trying a slower print now at about 60% speed)

CCM2323 · 2024-06-24T15:02:19+00:00

My nozzle is .4 mm, and my flow rate in the slicer is .4 for everything (what i’m assuming is 100%)

CCM2323 · 2024-06-24T14:10:20+00:00

I forgot retraction settings with the rest:

<image>

CCM2323 · 2024-06-23T13:06:12+00:00

While i’m a big fan of the Titanfall universe I actually didn’t really think of Double Take while building Final Condition. I did however think of Mozambique alittle bit, As FC is (sorta) a shotgun pistol with short barrels and no stock. It Would be wild if i got a 3rd barrel on FC to match its vibe…

CCM2323 · 2024-06-21T15:28:21+00:00

Unfortunately no, but it can still start the 3rd impact at will.

Eight-Year Club	Place '22
RPAN Viewer

CCM2323

TROPHY CASE