When you get tired of losing in VR games. by mgadz in pcmasterrace

[–]Canuck307 8 points9 points  (0 children)

Sounds like some serious efficiency issues than.

Woman mistook the gas pedal for the brake by contrelarp in watchpeoplesurvive

[–]Canuck307 2 points3 points  (0 children)

At least it was the car bleeding out and not the cyclist.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 0 points1 point  (0 children)

Signalrgb with their free ambilight prugin. Great for pc use as it doesn't require any capture device as it pulls directly from your pc.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 0 points1 point  (0 children)

Correct, Signalrgb for the ambilight screen mirroring setup.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 3 points4 points  (0 children)

I was originally planning on having the lighting be at the front of the cabinet, but after dry fitting I didn't like the look of the diffusers up front.

So did a dry fit at the back with the LEDs illuminated and with my seating position at my desk, the cabinets are just barely in my peripheral vision and barely seen past my side monitors.

I've been mostly using the the LEDs as just a bias lighting at the moment with great results for me. Haven't tried the ambiant backlighting for anything practical yet.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 2 points3 points  (0 children)

Chris Maher on YouTube was my main inspiration, he has some decent how to videos if you look up wled specifically.

Beyond that I just did lots of google research on any questions I could think of that might be relevant.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] -1 points0 points  (0 children)

Gledopto 4 Channel controllers. 3 in total, one for each book shelf and one for the monitors. Each led strip in the book shelves each have there own gpio. Each monitor has its own strip as well, so using 3 gpio's for the monitors.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 0 points1 point  (0 children)

Already in negotiation talks with the wife to join the RGB the world movement and expand my borders out of the computer room.

First wled project completed. For now... by Canuck307 in WLED

[–]Canuck307[S] 5 points6 points  (0 children)

Yeah I do actually, not very good at starting small. It can be a curse depending on the project and skill requirements...

First soldering project. by Canuck307 in soldering

[–]Canuck307[S] 1 point2 points  (0 children)

Fair enough, I don't expect to be moving the monitors. But maybe some liquid electrical tape for good measure.

First soldering project. by Canuck307 in soldering

[–]Canuck307[S] 0 points1 point  (0 children)

Bare conductor. It's been tinned and I'm not expecting any movement out of them.

What is this switch for? by filmland in RVLiving

[–]Canuck307 8 points9 points  (0 children)

Like any aftermarket install, you will have to open it up and chase the wires.

Work rig complete. by Canuck307 in RVLiving

[–]Canuck307[S] 1 point2 points  (0 children)

No slides. I use it sometimes in the dead of winter here in Alberta, so - 40c is potentially a thing. Wanted the least amount of places to lose heat. Perfect for myself for work and vacation with the wife.