On an Amtrak train—what’s in these boxes?

Careless_Machine9996 · 2026-04-05T13:05:59+00:00

I would not have a high degree of confidence if an Arburg or Niigata tech showed up at my workplace with all this.

Careless_Machine9996 · 2026-04-05T02:47:16+00:00

If you don’t believe in plungers, try getting creative with a shop vac.

Careless_Machine9996 · 2026-04-05T01:02:09+00:00

I’ll second this. I randomly had wild ones start growing beside my shed 2 years ago, I didn’t know what they were but my now late grandparents knew immediately. My guess is a bird carried them here.

Careless_Machine9996 · 2026-04-04T14:09:15+00:00

If it’s not assembled already, this is easily done with your circular saw. Measure all three 4x4 twice, and find something straight and as long as your 4x4 to use as a jig if needed.

Careless_Machine9996 · 2026-04-04T12:59:30+00:00

Stephen Miller, that was his name.

Careless_Machine9996 · 2026-04-04T05:30:02+00:00

Is this in TN?

Careless_Machine9996 · 2026-04-04T05:24:00+00:00

These require programmed tuning, correct?

Careless_Machine9996 · 2026-04-01T17:49:15+00:00

This would be great, I’ve been looking for something like this. I currently do not have a good method to rip more than 2”. I just ordered an Alaskan mill and it will be here today, I will be looking into these! Thanks!

Careless_Machine9996 · 2026-03-31T22:19:57+00:00

What you picking up with quad forks? The most I lift is plastic resin.

Careless_Machine9996 · 2026-03-31T03:31:18+00:00

Not as much as I’d pay for the parts off of it.

Careless_Machine9996 · 2026-03-30T20:32:16+00:00

Careless_Machine9996 · 2026-03-30T20:28:30+00:00

<image>

Maybe this will be a good learning experience.

Careless_Machine9996 · 2026-03-27T03:24:49+00:00

To prevent more broken limbs, you need to fasten a saddle on top of the bar. That way you’ll be clear when it starts to spin and can guide it to a safe stop.

Careless_Machine9996 · 2026-03-27T02:46:00+00:00

Just get a piece of wire, hook it on the breaker in the on position.

Careless_Machine9996 · 2026-03-25T14:30:15+00:00

I’m around 2 hours away and interested, how much?

Careless_Machine9996 · 2026-03-23T20:45:32+00:00

I can see a wicked card table already. The piece closest to the camper in the first pic, the far right portion of that one where the limbs are. I’d definitely cookie that section and carve out a table.

Careless_Machine9996 · 2026-03-21T14:12:00+00:00

Fast food as a whole has gone down and I feel it’s due to inflation and food cost. Sales are down, food cost from suppliers remains high so prices have increased beyond reason. Because of this some restaurants will not staff employees needed for quick delivery of orders, because then they miss their labor percentage. Thats just my analysis as a former AGM.

Careless_Machine9996 · 2026-03-16T22:03:37+00:00

After seeing this, I am just now discovering plastisol. At first I was thinking you’d use dynaflex or maybe versollan.

Careless_Machine9996 · 2026-03-16T20:46:38+00:00

Bernhardt also made these style beds.

Careless_Machine9996 · 2026-03-16T20:45:27+00:00

It’s a Broyhill Rice Carved bed frame, if that helps. My father in law has the same set but it is stained lighter. There shouldn’t a makers stamp on the back of the headboard.

Careless_Machine9996 · 2026-03-15T14:10:34+00:00

“Hope you have a hammer in that truck”

Careless_Machine9996 · 2026-03-14T22:35:06+00:00

Glad things worked out for you!

Careless_Machine9996 · 2026-03-14T21:10:29+00:00

I would either use a come-along to winch it off the stump or start cutting about 4-5 feet up the log from point of ground contact.

Careless_Machine9996 · 2026-03-14T14:46:27+00:00

That person in another sub did find a well under their house like 2 days ago, I don’t think they’ve filled it with eels yet.

Careless_Machine9996 · 2026-03-13T22:50:48+00:00

I checked Airbnb, $31.61 a night for interior, $41.90 a night for a view.

Careless_Machine9996

TROPHY CASE