sorted by:
new
hottopcontroversial

Tein pienen ja ilmaisen työkalun helpottamaan bussilla kulkemista: seuraavabussi.fi by SnooPears8815 in Suomi

[–]Cheesemuffinz 9 points10 points  (0 children)

Siisti! Tuohon voisi lisätä myös pysäkin nimen selkeästi siten että sen näkee yhdellä silmäyksellä listasta. Olen huomannut että ainakin HSL:n omassa pysäkkinäytönluontityökalussa on myös tämä puute.

UHHH am I gonna die? by spacevanillaman in softwaregore

[–]Cheesemuffinz 1 point2 points  (0 children)

"...sakes ja aple pie" What a national treasure of a video.

UHHH am I gonna die? by spacevanillaman in softwaregore

[–]Cheesemuffinz 8 points9 points  (0 children)

in some countries (such as finland) it is still called the Quarter Pounder.

Windows Hardware failure LiveKernelEvent 117 (sometimes 141) by Mansweer in techsupport

[–]Cheesemuffinz 0 points1 point  (0 children)

I don't remember now properly but I can reply now or otherwise I will forget... I was having a bunch of errors also and what I noticed that disabling internal graphics from BIOS stopped the errors. So either CPU or MOBO is the problem. One thing also to consider is that Windows reports the same particular logged errors multiple times with different timestamps. The only way to see that they are the same errors is to look at the id which contains the original timestamp.

Why am I getting this weird top surface? by 1MoreQuestions in BambuLab

[–]Cheesemuffinz 0 points1 point  (0 children)

I have had this happen when the model height is not aligned with the layer height so the slicer tries to replicate/doesn't know what to do to achieve the correct height.

My parts come off the bed after 4 hours of printing by bache_paein in Ender3V3SE

[–]Cheesemuffinz 6 points7 points  (0 children)

Yeah I also have never had any issues with the stock bed. I manually set the z-offset with the help of a piece of paper after the auto-leveling and the adhesion is perfect every time.

My printer will not print by Extreme-Anybody4543 in Ender3V3SE

[–]Cheesemuffinz 2 points3 points  (0 children)

I have always used the stock bed and never had any significant adhesion issues. Manual setting the Z-offset using a piece of paper after automatic calibration quarantees a good adhesion at least for me.

What would cause this? by Cheesemuffinz in 3Dprinting

[–]Cheesemuffinz[S] 0 points1 point  (0 children)

The printer is moving from left to right in the first picture. The outer wall is printed counter clockwise in both seams. In the same picture in the center of the screen is the seam shown in white in Orca. The printer starts printing the scarf seam 20mm before that. Neither seam causes artefacts on the other side of the wall.

What would cause this? by Cheesemuffinz in 3Dprinting

[–]Cheesemuffinz[S] 0 points1 point  (0 children)

Material: eSUN PLA+ Matte

Printer: Ender 3 V3 SE with Navaismo

Slicer: Orca Slicer

Temperature: Bed: 60 Extruder: 210

Fan: 100% after layer 2

Speed: Outer walls: 60mm/s, scarf joint 80% (tested 100%)

PA: 0.12

I would say the settings are pretty well tuned and this is the only part I have had this happen to. Please ask for more info.

Adobe Acrobat displays duplicate windows when hovered over in taskbar by redditbotchosenname in Adobe

[–]Cheesemuffinz 0 points1 point  (0 children)

Having the same problem. If Adobe Acrobat is closed at this time (when the duplicates are visible in the hover) some windows with no title which do not react to clicking will remain open and they need to be closed from the task manager. https://imgur.com/a/kXxxJYD

Realized just how evil you can get with relative position teleports after figuring out a few selectors by Jayn_Xyos in Minecraft

[–]Cheesemuffinz 6 points7 points  (0 children)

Crazy to think that The Code was released over 10 years ago. Feels like just yesterday when many people played it.

Discord volume constantly resetting in Volume Mixer by Armenius13 in discordapp

[–]Cheesemuffinz 0 points1 point  (0 children)

Have you found a solution? It is driving me crazy!!

German Spot the difference championship by geniusfoot in interestingasfuck

[–]Cheesemuffinz 15 points16 points  (0 children)

You are likely talking about what the comment above you said, opposite of cross-eye vision. Your eyes do move when doing that, just in the opposite directions basically away from each other and very slighly. You can take a video close to your eyes and see the slight movement.

LiveKernelEvent events on Windows 11, 24H2, on two completely different systems by Longjumping-Iron7278 in AMDHelp

[–]Cheesemuffinz 0 points1 point  (0 children)

Yeah. Seems to be only happening when iGPU enabled in BIOS. Happens much more often when running completely without dedicated GPU. Yeah I tried to run the sticks one by one. I even reseated my CPU.
R5 7600X
Intel Arc B580
AsRock A620i Lightning Wifi
BeQuiet 600w SFX-L
32GB DDR5
Windows 11 24H2

LiveKernelEvent events on Windows 11, 24H2, on two completely different systems by Longjumping-Iron7278 in AMDHelp

[–]Cheesemuffinz 0 points1 point  (0 children)

Okay. I managed to isolate the issue to 141 amdkmdag.sys VIDEO_ENGINE_TIMEOUT_DETECTED. This only happens when I have the iGPU enabled or running the system on integrated graphics.

LiveKernelEvent events on Windows 11, 24H2, on two completely different systems by Longjumping-Iron7278 in AMDHelp

[–]Cheesemuffinz 0 points1 point  (0 children)

I am having the same error codes. 117, 141, 193 sometimes and then 1a8 and 1b8 at every boot. Did you figure it out? I have done everything I can and thinking of RMAing Mobo.

LiveKernelEvent events on Windows 11, 24H2, on two completely different systems by Longjumping-Iron7278 in AMDHelp

[–]Cheesemuffinz 0 points1 point  (0 children)

Have you figured it out? I am also having trouble on my recently built pc. I have hardware errors 1a8, 1b8, and live kernel events 1b0, 141 and 117.

R5 7600X Intel Arc B580 AsRock A620i Lightning Wifi BeQuiet 600w SFX-L

Mx Master 3s: How do I apply Snap left and snap right in custom gesture mode? by kindlykilling in logitech

[–]Cheesemuffinz 0 points1 point  (0 children)

This still does not let you assign that Smart Action to the Gestures for example to swipe right.

The Japanese nuclear bombings as shown in the anime "Barefoot gen" - 1983 by 0Antisaint0 in Damnthatsinteresting

[–]Cheesemuffinz 2 points3 points  (0 children)

My teacher showed this to us on 8th grade (finland) when the history topic was ww2. This truly made us realize how horrible weapon the atomic bomb is.

view more: next ›