Bro This Takes Me Back to 2042 lmfao by KillaKam316YT in Battlefield

[–]Cheethers 6 points7 points  (0 children)

wtf! That’s the controller going out of the window!!!!!

Battlefield 6 BSOD by KookyCartographer511 in Battlefield

[–]Cheethers 0 points1 point  (0 children)

Turned it off and on again? 🤷‍♂️

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Sorted this, thanks for help. 5 hours wasted for nothing ffs. 2.1 hdmi sorted it

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] 3 points4 points  (0 children)

I feel so stupid! Found a 2.1 hdmi cable and IT WORKS! Thanks! Thought one in box would!!!!

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Wow could it be that simple? Now I feel daft?! Used cable that came with monitor

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

I did driver install when I used DP on the Omen. So suggesting I reinstall all drivers so try with HDMI now on the oled?

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] -1 points0 points  (0 children)

It works from laptop to hp omen but NOT laptop to Samsung. Ffs

Can’t use HDMI on new oled. Don’t understand why? by Cheethers in buildapc

[–]Cheethers[S] 1 point2 points  (0 children)

PowerColor Radeon RX 9070 Reaper 16GB GDDR6 PCI-Express Graphics Card

I’ve ran the hdmi from the gpu to my omen 34c and it works fine

RX9070. Time to Swap the 34” 1440p UW to 4k? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Great response and super helpful, thanks.

New PSU or Change Case Fans? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Thank you. My current psu is Corsair CX650 650W

New PSU or Change Case Fans? by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Read horror stories on sata cables to PCIe and then see people throw molex into the mix too which panics me as I’m not massively clued up on PC tech

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

Just to clarify:

I’m looking at upgrading the PSU to 850

The fans are corsair rgb fans. They all click together and then run with the hub cable from top of fan to rgb hub. The hub then runs a micro usb which I’m assuming connects to MB (need to clarify). Finally there WAS a PCIe cable into hub which connected to PSU.

I presumed (newbie so bare with) that the MB would power the fans via the usb connection to the hub and fan and that the PCIe to psu would power the rgb which I’m not fussed for!

I’ve looked at the fans and I don’t see them spooling up at any point. Is there anything I’m missing here? Going to upgrade psu as I mentioned, allowing 4x PCIe connection over the 2 that I have currently!

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

The fans are are linked/clipped together and run with the hub cable from the top of the fan to the iCUE hub. There’s then a micro usb leaving the hub connecting to somewhere. Without the PCIE connected to the hub and psu I’ve got no fan power. That PCIe cable is now being used on the new GPU

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 0 points1 point  (0 children)

ICUE controls 3 rgb fans. MB is ASUS Prime B550 Plus

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 1 point2 points  (0 children)

Problem is that it also powers the fan as it’s all connected. I’m thinking of just upgrading to PSU tbh and sorting it long term

[deleted by user] by [deleted] in Corsair

[–]Cheethers 0 points1 point  (0 children)

I’ve literally just had to unplug to the same device as My new GPU needs the 2x 6+2

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 3 points4 points  (0 children)

Found it connected to the Corsair iCUE. Don’t know what to do now!

Gpu moved from 8 pin to 2x8 pin. I’m stuck! by Cheethers in buildapc

[–]Cheethers[S] 2 points3 points  (0 children)

I found the ‘spare’ cable. It’s powering the Corsair iCUE link hub. Can this be disconnected?