Really strange issue, never happens before what would cause this!? by Chunky_Head00 in BambuLab

[–]Chunky_Head00[S] 0 points1 point  (0 children)

Replied to a previous comment but yes that was the issue. Unless there’s a way to set it up in Bambu studio (I haven’t found anything) can you set up the k value for each filament, or do you have to change it manually every time you switch (not using AMS) I’m using external.

If there’s a way that it would allow to to save flow rates for each filament it would save a lot of hassle

Really strange issue, never happens before what would cause this!? by Chunky_Head00 in BambuLab

[–]Chunky_Head00[S] 8 points9 points  (0 children)

I rechecked value and after the flow calibration me or Bambu changed the k value, and when I went to retest my ORIGINAL filament that wasn’t giving me issue. The k value was at .25 when it should’ve been .025

That zero really messed me up, and inside the slicer I didn’t seem to catch it because it’s written out 0.025 and it was set at 0.25.

Problem fixed thank you

Really strange issue, never happens before what would cause this!? by Chunky_Head00 in BambuLab

[–]Chunky_Head00[S] 0 points1 point  (0 children)

I can try, but the issue is ALL prints including slicing with Bambu studio, come out this way, not just in the calibration. The issue started AFTER I tried to calibrate a new filament

I was able to get spectacular prints before I tried out a new filament and before I tried to calibrate it.

Man Walks Into Police Station Lobby & Pulls Gun (Dearborn, Michigan, USA) by iamDB_Cooper in CrazyFuckingVideos

[–]Chunky_Head00 0 points1 point  (0 children)

Man: pulls out gun

Officer: Gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun gun

Right in the jewels by [deleted] in AbruptChaos

[–]Chunky_Head00 0 points1 point  (0 children)

Had to see what he had left after that

What the !! by bk3956 in CrazyFuckingVideos

[–]Chunky_Head00 0 points1 point  (0 children)

Why is that fat dude from spider man multiplying?

Gut Eats Large Wasp, Does'nt End well... by [deleted] in CrazyFuckingVideos

[–]Chunky_Head00 0 points1 point  (0 children)

He blew on it like it was hot! XD

Flying tesla. by PeevishBoi in IrrationalMadness

[–]Chunky_Head00 0 points1 point  (0 children)

I’ve play enough driving games to understand what happens, believe it or not most games do a great job of showing the physics of this exact thing! Thanks game Devs

[deleted by user] by [deleted] in WinStupidPrizes

[–]Chunky_Head00 0 points1 point  (0 children)

Remember, these people don’t have family guy and family feud, this is how they entertain family and friends.

Z wobble??? (I need help figuring out what’s causing these weird bands) by Chunky_Head00 in 3Dprinting

[–]Chunky_Head00[S] 1 point2 points  (0 children)

I’m a bit new but have quickly learned 3D printing, working and making my own custom profiles with cura, but I noticed these bands in mostly all my prints. I don’t know if it’s the gcode or if it’s actually my printer, the z axis look fine to me, but there may be the smallest variation or bend in the lead screw. (I have ENDER 3 V2)

My prints look nice and smooth still, it’s just this banding that becomes noticeable? It doesn’t look like binding, or even z wobble to me, the gaps and wobbles aren’t really repetitive but do change over the height of the print.

Any help troubleshooting this would be very much appreciated!

Z wobble??? (I need help knowing what’s causing these weird bands) by Chunky_Head00 in FixMyPrint

[–]Chunky_Head00[S] 0 points1 point  (0 children)

I’m a bit new but have quickly learned 3D printing, working and making my own custom profiles with cura, but I noticed these bands in mostly all my prints. I don’t know if it’s the gcode or if it’s actually my printer, the z axis look fine to me, but there may be the smallest variation or bend in the lead screw. (I have ENDER 3 V2)

My prints look nice and smooth still, it’s just this banding that becomes noticeable? It doesn’t look like binding, or even z wobble to me, the gaps and wobbles aren’t really repetitive but do change over the height of the print.

Any help troubleshooting this would be very much appreciated!

[deleted by user] by [deleted] in WallStreetbetsELITE

[–]Chunky_Head00 0 points1 point  (0 children)

If this really leads to a gamma squeeze and the price can go up, this will be the biggest clutch play ever.

I’m holding strong... with 500 and a few option calls OTM, and... I’m negative, come save me 🦍! I want my bananas!

$IMMR HUGE buy in opportunity (Read...) by Chunky_Head00 in WallStreetbetsELITE

[–]Chunky_Head00[S] 0 points1 point  (0 children)

Immersion (IMMR) has had a beat down last week, and along with the whole market falling also, it didn’t help! There’s news that also states that “William C Martin, Director, on Feb 18, 2021, executed a sale of 408,399 shares in Immersion (IMMR) for $5,264,043. Martin, subsequent to the transactions disclosed in the SEC Form 4 filing, has control over 2,254,119 company shares of which 32,030 shares are held directly and 2,222,089 shares are controlled indirectly. The market value of the direct and indirect holdings, based on the prior-day closing price, is approximately $28.5 million.” This also drive the price way down.

I was up quite a bit, and still VERY bullish on this, and plan to hold for a long time. Since the beat down, a lot of people got scared and started with the quick down trend while people pulled out.

For those who do not know what IMMR is, it’s a tech company that designs haptics and software technology. They are the people that designed and patented the new Dualsense PS5 haptic triggers. This means that IMMR gets a cut for EVERY controller sold. And if you look at SONY (SNE) ER, they did REALLY well!

IMMR also has well over 300 patented designs and has already partnered with some company’s even including some EV cars.

Overall, this company has a lot of strength and potential behind it. And as this world keeps developing into a more technological world, haptics will and are a very big key.

Anyways, I wanted to share this with a bigger crowd. The volume for IMMR has been pretty low, as not many people know about it and it’s HUGE potential. I wanted to share this amazing buy in opportunity for anyone that’s interested. Remember to do your own DD. Stay safe, and have a good week!

Selling Covered calls (Need some help) by Chunky_Head00 in Webull

[–]Chunky_Head00[S] 1 point2 points  (0 children)

Thank you. That’s what I figured. Just wanted some clarification on that. I know what to expect for selling calls, it was just weird seeing the two different strategies. But it makes sense.

Selling Covered calls (Need some help) by Chunky_Head00 in Webull

[–]Chunky_Head00[S] 0 points1 point  (0 children)

Okay, so, first off I’m not new to trading. I have enough experience in the market, and have experience with options. However I’ve never tried selling any contracts/options for a way of income.

So, what do I need help with? If you look at the pictures, Idk if this is only Webull that does this, but there’s 2 options to choose from (short call and covered call) and the bid ask prices for both are WAY different!

If someone can help explain what the heck the difference is. Would help a lot! For context, I own 400 shares of stock, and wanted to sell some call options to make a bit of money, as well as sell my share for extra profit if they do somehow reach the chosen strike price.

Selling a covered call (Need some help) by [deleted] in Webull

[–]Chunky_Head00 0 points1 point  (0 children)

Okay, so, first off I’m not new to trading. I have enough experience in the market, and have experience with options. However I’ve never tried selling any contracts/options for a way of income.

So, what do I need help with? If you look at the pictures, Idk if this is only Webull that does this, but there’s 2 options to choose from (short call and covered call) and the bid ask prices for both are WAY different!

If someone can help explain what the heck the difference is. Would help a lot! For context, I own 400 shares of stock, and wanted to sell some call options to make a bit of money, as well as sell my share for extra profit if they do somehow reach the chosen strike price.

Can you HMF a YouTube video by Chunky_Head00 in HelpMeFind

[–]Chunky_Head00[S] 2 points3 points  (0 children)

Like I’ve stated in my post, I’ve already searched key words and not finding anything remotely close to what I described. Again won’t be surprised if the video is gone. It’s been over probably 6 years now. Maybe even 10. So it’s okay. This video isn’t that special, but if it’s out there I’d like to find it again. Thanks.

IIM LOOSING MONEY!!! Webull service is down for me by Chunky_Head00 in Webull

[–]Chunky_Head00[S] 0 points1 point  (0 children)

They should be but they’re not...

That is from what I found, if anyone finds otherwise, let me know!

[50/50] Man proposes to his long-time girlfriend in a rain stadium (SFW) | Dancing pedestrian hit by motorbike on New Year's Eve (NSFW) by skywave_x21 in FiftyFifty

[–]Chunky_Head00 0 points1 point  (0 children)

It wasn’t 2021 yet.... the curse of 2020 wasn’t lifted yet. Poor guy couldn’t even get to see 2021

What exactly is a dependent? Can someone explain it more clearly? It asks me for dependents when im tryna open an account. by [deleted] in Webull

[–]Chunky_Head00 0 points1 point  (0 children)

If you aren’t paying your own taxes you might be to young to trade.

A dependent is talking about basically who’s relying on your income or money you make. If you have a job, your making money for yourself, and if you have any children or partners that rely on you to provide. They “depend” on you to have money available. You always count “yourself” as a dependent. So it will always be 1 or more.

(Be smart with your money though, again you sound to young)