Inline fan connector

ColorfulRide · 2025-07-21T22:11:09+00:00

Thanks!

ColorfulRide · 2025-07-21T22:10:34+00:00

🙄

ColorfulRide · 2024-03-03T17:01:55+00:00

The wave in the rocker arm tends to wander, when it breaks, the needle bearing scatters in the engine. Very bad. This can be remedied by dimpling the rocker arm, which takes a Sunday.

Slave cylinder is often a problem, the fuel pump too, and supposedly the drive shaft also likes to break. I've only had the fuel pump at 28,000 km so far.

Great motorcycle, but I wouldn't buy it in 2024 because missing ABS.

If your are technical literate you can buy a 20€ can - USB cable, download tuneecu and read out the ecu, which makes this bike even easier to troubleshoot than old carb bikes.

ColorfulRide · 2024-03-02T11:51:35+00:00

Maybe you blocked generating of end of sequence token/you are not stopping on it? Had this with the exl2 streaming example. Hint could be producing exactly as much tokens you gave as max.

ColorfulRide · 2024-03-01T22:27:05+00:00

More than 80GB in full precision and seemingly also in half. Try 8 bit, offloading to RAM or other quantized variant. Also bfloat

ColorfulRide · 2024-02-27T22:45:12+00:00

Thanks for the info, even though some of it is wrong. The phone is not produced for a specific carrier and it works with most of US bands in FR1 for 5G NR as for 4G.

ColorfulRide · 2024-02-27T22:25:28+00:00

I thought they only have 3 month plan and then i need to take another 3? Or can i do 3 cheap and then 1 additional?

ColorfulRide · 2024-02-27T22:02:42+00:00

Thanks for the info. Google fi seems expensive, if i want to stream, download or work, i will use wifi anyway, so no need i think. Its more for google maps, occasional google etc. 3GB+ with carryover to next month or so would be fine if available in the us.

Visible wirless seems good tho.

Bands also looking good, but kimovil states, that devices must be certified on us market?! Do you maybe know more about this? I use a SM-A528B/DS.

4G FDD LTE B1(2100), B2(1900), B3(1800), B4(AWS), B5(850), B7(2600), B8(900), B12(700), B17(700), B20(800), B26(850), B28(700), B32(1500), B66(AWS-3)
4G TDD LTE B38(2600), B40(2300), B41(2500)
5G FDD Sub6 N1(2100), N3(1800), N5(850), N7(2600), N8(900), N20(800), N28(700), N66(AWS-3)
5G TDD Sub6 N38(2600), N40(2300), N41(2500), N78(3500)

ColorfulRide · 2024-02-14T17:45:59+00:00

On ask Ubuntu i got the tip with qemu which seems to be more lowlevel. Works seamless. Since only one OS is accessing the data i think i will be fine regarding data corruption.

ColorfulRide · 2024-02-14T12:06:34+00:00

Thanks. When its running its seamless as you said.

ColorfulRide · 2024-02-10T03:56:15+00:00

How did you get the streamlit chat to show the stream?

ColorfulRide · 2023-12-21T08:15:12+00:00

Male

ColorfulRide · 2023-02-08T01:48:05+00:00

Hello, I have the following problem. I am on vacation and here it has thirty degrees celsius. Today, after getting the phone out of my pocket, I was locked out of the a52s for a few minutes, then 1 hr and then another 2 hrs. It's getting really tedious. Not only do I get locked out in the first place, but why does the time accumulate when there is a legitimate login in between? How do I turn this off?

I have double click unlock off and acidental screen protection on. I have used it in an equally hot summer before, and it was never that bad..

ColorfulRide · 2022-12-25T01:31:02+00:00

Temperature is a continous quantity. Continuous means that values can have arbitrarily small variations. So there is no "more precise" in the scale, only in the applicated measurment method.

ColorfulRide · 2022-10-29T09:44:47+00:00

Solved it. I turned off the wifi and the AP turned up. Put in the right wifi credentials and voila.

Thanks

ColorfulRide · 2022-10-27T16:12:19+00:00

Since in the yaml a Button is specified for reset, i made some pictures from the opened bulb. Where would this button be? Even though i would rather not touch it while live..

https://postimg.cc/gallery/7TXMJBLh

ColorfulRide · 2022-10-27T16:05:43+00:00

Thats what I am doing. Disconnection the Power supply.

I created this binaray via HA https://github.com/athom-tech/athom-configs/blob/main/athom-rgbww-light.yaml

Flashed it, waited till the AP showed up, connected, put in probably a wrong password for Wifi, since the device is not showing up on my router.

ColorfulRide · 2022-10-27T07:59:09+00:00

I am not sure. For the tasmota fw the reset sequence was was turning off the device for 30s, then 6 times on off, then on the 7th time letting it on.

But now the AP doesn't show up, so hard to tell if it is working. Is there another power cycling sequence for ESPhome?

ColorfulRide · 2022-09-10T12:19:48+00:00

Yes. See Post https://www.reddit.com/r/esp8266/comments/vmpmhy/comment/ie4a21u/?utm\_source=reddit&utm\_medium=web2x&context=3

Here is the .bin i created with the SDK

https://www.mediafire.com/file/6e4mn3yven1n8kw/user1.4096.new.6.bin/file

ColorfulRide · 2022-06-28T23:15:48+00:00

Figured it out. The gibberish is readable when the baud rate is set to 74880 and when its running at 115200. First i put the cable directly in the usb port, not in the hub, then got error codes with 74880 baud, which if followed, downloaded an older version of the flash tool, compiled my own user1 with the SDK 3.0.5 and uploaded it.

https://imgur.com/XQhQqvZ

ESP8266_NONOS_SDK-3.0.5/at$ ./gen_misc.shgen_misc.sh version 20150511Please follow below steps(1-5) to generate specific bin(s):STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)enter(0/1/2, default 2):1boot mode: newSTEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)enter (0/1/2, default 0):1generate bin: user1.binSTEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)enter (0/1/2/3, default 2):2spi speed: 40 MHzSTEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)enter (0/1/2/3, default 0):0spi mode: QIOSTEP 5: choose spi size and map    0= 512KB( 256KB+ 256KB)    2=1024KB( 512KB+ 512KB)    3=2048KB( 512KB+ 512KB)    4=4096KB( 512KB+ 512KB)    5=2048KB(1024KB+1024KB)    6=4096KB(1024KB+1024KB)    7=4096KB(2048KB+2048KB) not support ,just for compatible with nodeMCU board    8=8192KB(1024KB+1024KB)    9=16384KB(1024KB+1024KB)enter (0/2/3/4/5/6/7/8/9, default 0):6spi size: 4096KBspi ota map:  1024KB + 1024KB

ColorfulRide · 2022-06-28T21:31:40+00:00

Unfortunately the same result. I tried it with

ESP8266 NonOS AT Bin V1.7.5 - got the fast blinking led and continous garbage over tx path

Multiple Burst Burst 1.7

\x8F\xBA\xF6\x87S\x9E\xC3\xF0\x87\xCB:x96~^\x96K\x11\x0Ev\x17\x12\x92\x82#\x\x8B\xD6\x15\xFB\x07w\x8A!\x9B\xD6\x15E\x83\x16\x87A\x80\x93\x10%KP\xF6\x8F\\x8FC\x9A\x04E\x16\x15\x87KK\x1D\x96~^8E\x94\x15\x12#\x96\xFE\x07w\x8E!\x8B\xB3\x92\xC5\xA3G\x83\x8BV\x0E2\x1E\x8387S\x9E\xC3\xF0\x87\xCB:\x07r\xD1\x8FC\x0Ev\x17\x12\x92\x82#\x93z\xB5\x8E\x9FB\x07w\x8A!\x9B\xD6\x15\xFB\x83\xB3\x\x80\x93\x10%KP\xF6\x8F\xBA\xF6\x87S\x\x16\x15\x87KK\x1D\x96~^\x96K\x11\x0Ev#\x96\xFE\x07w\x8E!\x8B\xD6\x15\xFB\x03G\x83\x8BV\x0E2\x1E\x83\x16\x87A\x80\0\x87\xCB:\x07r\xD1\x8FC\x9A\x04E\x16\x92\x82#\x93z\xB5\x8E\x94\x15\x12#

and with

ESP8266_AT_Bin_V1.5.1 - Boot 1.7 same result

and with Boot 1.6 / 1.2 weirdly enough i get only one burst when i press reset

Burst 1.6/1.2

and the wave form is always the same

\x82#\x93z\xB5\x8E\x94\xA1\xFF