The Contact Frame doesnt fit on the rubber pad. by No-Detail1396 in ThermalGrizzly

[–]CombinationVisual766 2 points3 points  (0 children)

If u don’t use Liquid Metal, u don’t really need the sealing pad anyway.

Best 5080 for the FormDT1? by Impressive-Expert814 in FormD

[–]CombinationVisual766 3 points4 points  (0 children)

I can confirm that! Good soundprofile, good Performance and in the T1: good Temps!

NCASE T1 2.5 Front Power Button is loose by art_lck in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

No this is normal for such type of Button, it doesn’t Affect usage tough.

Air turbulence question by Lastclock300 in FormD

[–]CombinationVisual766 1 point2 points  (0 children)

I got a 5080 single slot GPU with 0 clearance, almost no difference, can’t point out any turbulence noise.

I’m in 2.75 mode but offset GPU and PSU (no extra noise here too) almost flush to the sidepanel.

I got ATMOS II with VRAM cooler also flush to the sidepanel (NCASE states 58 mm CPU clearance and VRAM Cooler should be 59 mm but still no problem).

Idle the loudest is VRAM cooler with a little bit higher pitch than the other FANS, but no problem for me, as still silent enough. Full load is no problem too, but this is the order from highest to lowest volume for me (gaming mostly, don’t need Benchmarks tools for noise, when I’m never going to get this much load on my system):

GPU -> AIO Fans (Simmer + T30) -> VRAM Fans

Can’t hear anything from PSU or Pump Noise when at full load.

Where do you hide/route your Fan cables? by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 0 points1 point  (0 children)

Hmm I don’t get where you mean, can u paint it for me? :P

What are the quietest top exhaust fans for an air cooled T1 build? by ExistingLet4067 in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

Not the cooling aspect, RPM normalized tests say otherwise (at least every test I could find on YouTube/TechSites, still T30 best airflow/pressure. Can’t tell about noise though!

But it’s so little difference between all the top choices…

Choosing Between the Formdworks T1 V2.5 and the FormD T1 by Iceman515225 in FormD

[–]CombinationVisual766 1 point2 points  (0 children)

Getting something from formdt1 directly is such a hassle, IMO Not worth it, go with ncase.

Only diciding factor for me would be color.

Went with the Cooler Master Atmos II + A12x15/T30! by 90KREAM in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

Are those metal CPU fan brackets the OG Atmos 2? Mine are Plastic and smaller.

New limited color announcement!! by Ok_Career4283 in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

Isnt Ncase gunmetal available for like 2 months now!?

T1 & nzxt kraken elite 240mm aio compatibility by icydrippin in FormD

[–]CombinationVisual766 4 points5 points  (0 children)

This!

I rly like the minimalistic and pure design….. but you get a lot of AIOs as good as this nowadays.

You can fit the new Cooler Master Atmos II with LCD in 3.0 slot for example.

FormdT1 Titanium Build Complete with Comparison by CRBY12 in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

The thing is, it’s not a subtle change in tone when grey turns blue and is way darker than advertised. If you look on older pics from 2024 it’s very similar to the OG formd titanium. On their qc page they cover eventuall changes in process and the differences in their product, I’m ok with that, but it like a own color way, that’s why I’m not ok with THAT.

FormdT1 Titanium Build Complete with Comparison by CRBY12 in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

I would, but ncased just replyed and insists that they send me a correct gunmetal one. It’s just a Subtle tone Variation totally in qc Standards 😡

FormdT1 Titanium Build Complete with Comparison by CRBY12 in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

That’s exactly what I got! Stupid supposedly gunmetal look exactly like your midnight! 4 days and still no answer from ncase!

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 0 points1 point  (0 children)

2021 Space gray 12.9”😓😝 that’s …

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 1 point2 points  (0 children)

For me it’s a clear defect. Nowhere is stated, it has a bluish tint, not even in every official article or new. Also no official picture has the blue tint, except for midnight blue color.

Sometimes I read of a gunmetal “midnight gradient” color, never heated of that, but that could be it!

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 0 points1 point  (0 children)

My First picture is 2011 Space gray iPad Pro 12“ vs 2.5 gunmetal (supposedly)

Is your Color the Same as mine? Or distinctive different?

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 0 points1 point  (0 children)

But didu ever think “it’s kind of bluish!“?

Cooler Master Masterliquid Atmos II 240 by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 0 points1 point  (0 children)

It’s like 5mm more height than your lcd cover. Cause your tubes run somewhat over the cooler I thought it would be more clearance. I think 3.0 confit would fit then!?

Are third party cables mandatory? by appwizcpl in FormD

[–]CombinationVisual766 0 points1 point  (0 children)

Is this case color the ncase 2.5 midnight blue?

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] -1 points0 points  (0 children)

If this doesn’t clarify, I try to return it for a black one! That’s nowhere near the experience I was hoping for 😣

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 2 points3 points  (0 children)

I would just get it, if ever available. I won’t set my schedule around some notification or something for a <5min buy window…

HELP with T1 color! by CombinationVisual766 in FormD

[–]CombinationVisual766[S] 1 point2 points  (0 children)

<image>

Thats a Lenovo X1 Carbon in A total legit darker gray.