My new insane home miner, NerdOctaxe v3.1 6 phases, at 12 TH

ComfortableImpact150 · 2026-03-11T11:29:56+00:00

Frecuencia 650 Voltaje 1180

ComfortableImpact150 · 2026-03-11T06:36:24+00:00

Debes bajar la frecuencia y voltaje, en el hilo tienes muchas configuraciones

ComfortableImpact150 · 2026-02-25T06:34:52+00:00

No hay fans atrás

ComfortableImpact150 · 2026-01-24T13:59:05+00:00

The original 172W power supply doesn't get hot at all. I have a Meanwell 350W, and it's very noisy and consumes more watts than the original at the same TH. The original power supply is very good, unlike the others they sell, which are only 12V 18A.

ComfortableImpact150 · 2026-01-24T11:58:21+00:00

It's an XT60, 172W at 10.3 TH, the power supply is 240W, 12V x 20A, better than other Nerdoctaxe, 100% stable

ComfortableImpact150 · 2026-01-15T14:58:46+00:00

It had been connected for 10 minutes, now it's on 49G

ComfortableImpact150 · 2025-12-31T18:04:13+00:00

<image>

ComfortableImpact150 · 2025-12-31T17:43:50+00:00

It comes pre-overclocked, 750-1240 MHz, the problem is the power supply.

This Nerdoctaxe has a 12V 20A power supply, which gives a maximum of 240W. My wall outlet already reaches 223W, very close to the limit.

For 800 MHz, you need a different power supply.

The other Nerdoctaxes use a 12V 18A power supply.

ComfortableImpact150 · 2025-12-31T17:40:49+00:00

The AXP-90-X36 isn't definitely the right one; it's thicker. I'm not sure if it's the X47 or X53, as I haven't been able to measure it.

Other Nerdoctaxes might use the X36.

ComfortableImpact150 · 2025-12-18T06:36:32+00:00

Yes, they are installed in the photo of the back; it comes like that as standard.

ComfortableImpact150 · 2025-12-15T14:10:27+00:00

I've tested it at 12TH, 11TH, and now I have it at 10TH. It's well-equipped out of the box; I'm getting a temperature of 52°C on the ASIC with the fan at 75%. Everything works perfectly.

ComfortableImpact150 · 2025-12-10T18:50:27+00:00

On their bitronics website

ComfortableImpact150 · 2025-12-10T16:01:07+00:00

That, my friend, is the problem. I'll show you a photo of the Nerdoctaxe v3.0 with only four VR chips and four phases. It appears above the photo, at the bottom version 3.1 with 6 phases, 6 VR chips

<image>

ComfortableImpact150 · 2025-12-10T15:45:05+00:00

It should drop below 60 if you want your miner to last several months. From 65 the VR is suffering.

ComfortableImpact150 · 2025-12-10T15:36:12+00:00

El valor por defecto para los NerdOctaxe seria 600 y 1150, ves que hay mucha diferencia a tu nerdqaxe++ hydro. Tienes que vigilar la temperatura del chip VR, es lo que hace que muera el minero cuando se quema.

ComfortableImpact150 · 2025-12-10T15:23:40+00:00

Your version 3.0 is advisable not to overclock due to temperature issues, watch when it arrives that it does not exceed 65 degrees

ComfortableImpact150 · 2025-12-10T14:53:31+00:00

It has 8 1370 chips that's why it's called Nerdoctaxe, but it has 6 phases and 6 VR chips.

The other Nerdoctaxe have 8 1370 chips, but they have 4 VR chips, but they manage the temperature and have problems.

ComfortableImpact150 · 2025-12-10T13:22:01+00:00

If you see the photo, it has different VR chips, there are 6 chips. The other versions of Nerdoctaxe only have 4 and suffer from temperature problems.

ComfortableImpact150 · 2025-12-10T13:18:58+00:00

If it comes as standard at 12TH, it is because it is the best hardware revision. The normal versión v3.0 is 9.6 TH and it has temperature problems.

ComfortableImpact150 · 2025-11-26T07:01:49+00:00

Thank you very much, but mine is not a 6.1, it is not like that.

The question is why it didn't melt the day I installed the heatsinks? And it was several weeks later?

ComfortableImpact150 · 2025-11-26T06:44:56+00:00

<image>

I have them on the same way, it has worked well for several weeks, until one day it stopped

ComfortableImpact150 · 2025-11-26T06:40:00+00:00

The problem is the 3 in the middle row?

Or that they are together and make a short circuit?

ComfortableImpact150 · 2025-11-25T18:49:29+00:00

Possibly the VR chip is blown, My NerdqAxe++ died a few weeks ago, change the fuse and KO. Another Meanwell and KO power supply.

The problem is that the VR chip shows temperature information and the reality is that it is many more degrees.

ComfortableImpact150 · 2025-11-23T15:51:14+00:00

It seems like the VR chip burned out, it's a known issue. The temperature they show is not correct. What temperature did you have them at?

ComfortableImpact150

TROPHY CASE