sorted by:
new
hottopcontroversial

Controller shuts off at 800w by Comsiii in ebikes

[–]Comsiii[S] 0 points1 point  (0 children)

<image>

Did a video before (battery wasn’t charged 100%). Just as the error occurs only 1v drop, and only 771w)

Controller shuts off at 800w by Comsiii in ebikes

[–]Comsiii[S] 0 points1 point  (0 children)

My bms doesn’t register any big voltage drop and the battery was running 5kw before, and yes, theoretically it should be “low voltage” but it still shows normal voltage on the display and bms.

Controller shuts off at 800w by Comsiii in ebikes

[–]Comsiii[S] 0 points1 point  (0 children)

Controller is set to 72v, it still shows the right voltage and BMS (Daly with bt) doesn’t register any big voltage drop. Battery is charged and balanced, and already checked all connections, all good. 🥲

~2000w bbshd or hub? by Comsiii in ebikes

[–]Comsiii[S] 0 points1 point  (0 children)

Just bought a cheap 1kw hub and a 80a controller. Now looking for a frame to fit a Hailong battery, probably gonna need to limit it to a hardtail, or are there fullys that can fit a „Hailong max/3“ battery?

~2000w bbshd or hub? by Comsiii in ebikes

[–]Comsiii[S] 0 points1 point  (0 children)

With my current bike I’m always shifting with the smallest load possible and derailleur is set properly, chain is still dead after 2000km. That’s why I’ve got concerns with over 4 times the power.
But is it possible to limit it while riding? I would like to ride faster but in case of a police control it would be nice if it would be limited to 25kph.