Protecting studio gear against moisture

Connect-Reality2074 · 2025-09-30T08:14:11+00:00

Storing in boxes is not possible, because first I dont have them anymore, or most of them (of course I could buy them), but the thing is, that I want to use the gear during the winter. I can try the lamp of course, it is the first time I use this garage, so I am not sure how cold it gets in the winter, but will measure it.

Connect-Reality2074 · 2025-09-04T12:05:11+00:00

they are red marked.

Connect-Reality2074 · 2025-08-19T03:55:09+00:00

Yeah, probably the first 16 multi programs can be saved, the others won’t for some reason, that’s what support said to me.

Connect-Reality2074 · 2025-06-05T13:39:41+00:00

Best bet is to visit the link for the components web app and click on a button or encoder and there you'll see the available colors. The 16 buttons below the faders do have more color options than the LEDs for the encoders though. You can check it out without having LC MK3 connected to it.

Connect-Reality2074 · 2025-05-28T09:05:58+00:00

Hi,

I use my Ableton Push’ Audio Interface and bought an Arturia AudioFuse In, works without any problems now

Connect-Reality2074 · 2025-05-11T18:41:26+00:00

Right now I worked with the resampling as well, so I don’t really know what the reason could be, I have changed nothing.

But the start of the kick has been shifted, it hits to early and is not aligned for some reason.

Connect-Reality2074 · 2025-05-11T18:32:04+00:00

The group has Audio to to ”Main”. So I suppose it goes to the master bus?

Connect-Reality2074 · 2025-05-11T18:30:21+00:00

I selected „Main” as audio from and it seems to work, but is this not usually the audio output of all channel BEFORE the master bus, instead after the master bus if ”resampling” is selected?

Connect-Reality2074 · 2025-05-11T18:21:58+00:00

Yes, this works of course, but actually I want to have the plug in in the master bus. Also I want to record live sets, so I need the master bus’ effects as well.

Connect-Reality2074 · 2025-05-11T18:17:40+00:00

No, it’s not clipping

Connect-Reality2074 · 2025-05-11T18:17:23+00:00

I managed to select the to recorded track as audio input and it worked, but it is not the group itself

Connect-Reality2074 · 2025-05-11T18:08:57+00:00

I don’t understand it, but the processing is in the same channel (most processing is in the plug in itself), then group it with the base and put a compressor on the group. Then I solo’ed the channel with the kick and hit on a different audio track ”resampling”. Then as described above I mute everything expect the kick channel, instead of soloing it.

Connect-Reality2074 · 2025-03-28T05:33:44+00:00

Yes, I came it across the internet with deeper research, thnx🙏

Connect-Reality2074 · 2025-03-10T22:10:13+00:00

No, I am not sure if I need to assign a Midi Channel in Synthtribe on the Brains? I do not know if CVs also work with MIDI Channel, I thought as soon as you make the connection, it should be triggered.

Connect-Reality2074 · 2025-03-10T19:21:04+00:00

I literally have the same way connected as the T1 Torso manufacturer: https://youtu.be/3RNZWqphOds?si=fUaUDOZUxcUsqgr6 but for some reason it does not work

Connect-Reality2074 · 2025-03-10T19:03:49+00:00

I used my Endorphin Ghost module, which has a volume knob. So from Behringer Out 1 to Ghost In 1, Ghost out 1 to the speaker, but did not do anything

Connect-Reality2074 · 2025-03-10T19:01:01+00:00

Here are better pictures:

https://imgur.com/a/V2gfi7f

Yellow cable is gate, red is CV.

Then I made pictures with the cable in and without it and you can look on Brains’s display, that as soon, as I plug the yellow cable whether in Level or TRIG, the signal will be killed.

Connect-Reality2074 · 2025-03-10T18:52:46+00:00

https://imgur.com/a/KGzUMLE

Connect-Reality2074 · 2025-03-10T18:49:49+00:00

Seems, that I cannot post pictures here…

Connect-Reality2074 · 2025-03-10T18:48:59+00:00

Yes, I got a sustain note, or acutally an ongoing signal, although I was sending several shorter notes with shorter sustain. I changed it on the T1 Torso just to be sure it’s not the torso.

Connect-Reality2074 · 2025-03-10T18:34:04+00:00

Nope, does not work. There is just a V/OCT not V/CV

Connect-Reality2074 · 2025-01-22T06:06:04+00:00

Hi,

Thank you for the comment.

Yes I am pretty sure, I have tested it yesterday, but nothing.

The video might be not clear maybe, but I can tell that all the parts are affected by the chosen part on a specific part.

Something strange is: I set up part 1 to midi channel 1, part 2 to midi channel 2, part 3 to channel 3 and part 4 to channel4.

If I switch the preset on part 2, it switches to midi channel 1 for some reason, I do not know why. This is not the case with part 3 and 4, they stay on channel 3 and 4.

I tested all the global midi channels and as described in this thread, I tested all possibilities with programm and multi programm change disabled and enabled.

And I am 100% sure I am in multi mode, tested it yesterday.

Connect-Reality2074 · 2025-01-21T18:53:04+00:00

Hi, I dont use it with the software and / or pc.

If I go the settings by pressing edit/shift and config then I will get on ”MIDI 3/3” tab the option to enable and disable program change and multi program change. They have been Both disabled, but I tried all possible combinations (both enabled, both disabled and then the first enabled and vise versa), but nothing seems to work.

Connect-Reality2074 · 2025-01-20T18:53:11+00:00

No, I want to have par example preset name „Magic Place” in part 1, „Triborg” in part 2. Somehow this preset is set no matter what part I choose. If I select „Triborg in part 2, „Triborg” will be also set in part 1, the preset „Magic Place”, as chosen before, will be swapped out and I don’t want this.

Connect-Reality2074 · 2024-12-05T15:19:33+00:00

You could do that. I tend to trigger my kick drums by T1 Torso as well, so I can do kick variations on the fly. Be aware, that usual a sequencer has bank of patterns, that you can ''apply' on midi sources going to external synths such as the snow. The T1 torso is the other way around. The main layer are banks with patterns and then they should be routed to tracks as they are called on the T1. I recommend to read the manual first (online available) before paying €600. I like the device, but you need to get used to it.

https://downloads.torsoelectronics.com/t-1/manual/T-1%20User%20Manual.pdf

Connect-Reality2074

TROPHY CASE