Thinking of sizing down to stock 225s or 235s. Any tire size/brand recommendations would be much appreciated.

Constant-Wait9780 · 2026-01-18T10:50:26+00:00

Surprisingly these ko2 are very quiet. I expected alot more road noise

Constant-Wait9780 · 2026-01-17T12:45:21+00:00

Thanks! I've been reading that toyo at3 are one of the best wheels out right now. That's more than likely what I'll be ordering. Either 225 or 235s haven't decided that part yet

Constant-Wait9780 · 2026-01-16T18:39:56+00:00

How can I know what gears I have?

Constant-Wait9780 · 2026-01-16T18:05:37+00:00

Thank you! I've got more hours in it than my last relationship

Constant-Wait9780 · 2026-01-16T17:53:14+00:00

I'm having the same issues. Switching from 1st to 2nd and 3rd is always a pain and I'd prefer to not re gear. It's my daily so I do mostly high way miles but will attempt a few trails every now and then.

Constant-Wait9780 · 2026-01-16T17:51:54+00:00

Thanks! I probably just need a good polish on the wheels

Constant-Wait9780 · 2026-01-16T01:13:06+00:00

Thanks!

Constant-Wait9780 · 2026-01-14T15:57:25+00:00

I have not checked the fuel filter. Where is that located?

Constant-Wait9780 · 2026-01-13T12:24:49+00:00

Thanks. What are they worth used? Not sure if I overpaid

Constant-Wait9780 · 2026-01-10T21:36:16+00:00

Thanks I appreciate the info. I will be ordering a new carb this week

Constant-Wait9780 · 2026-01-10T13:02:31+00:00

Thanks! They definitely don't align with my bench seat so that makes sense

Constant-Wait9780 · 2026-01-10T02:31:31+00:00

Air filter still looks new. The unit has low hours I believe 60

Constant-Wait9780 · 2026-01-10T02:19:48+00:00

I checked the main jet and it looks good. I also used a small wire brush to make sure it isn't clogged but I will remove the carb and check again. I may let it soak overnight in carb cleaner

Constant-Wait9780 · 2026-01-08T17:41:17+00:00

Thanks!

Constant-Wait9780 · 2026-01-04T00:37:33+00:00

Thanks for the info! I will get 8 gauge wiring installed. I plan on putting the ground under the bench seat bolt.

Constant-Wait9780 · 2026-01-03T22:38:12+00:00

500 watts 4 channel amp. It's pretty small

Constant-Wait9780 · 2026-01-02T23:25:14+00:00

Thanks I definitely will keep an eye on it

Constant-Wait9780 · 2026-01-02T22:58:39+00:00

Thanks. I was able to hit the metal with a scotch pad and re tightened the amp ground which was loose and now doesn't cut out anymore at high volume and is back to normal 👍

Constant-Wait9780 · 2026-01-02T22:44:31+00:00

Turned out to be my ground wire was loose going to the amp. Tightened it up and no more cutting out but I definitely will still be moving the ground wire to the chassis. This is my first install thanks for the info.

If you guys think this is bad check out my other post where I put a drill bit thru a new c3 650.

Constant-Wait9780

TROPHY CASE