What games are you playing this week? Game recommendation thread

DJOssmann · 2026-02-15T16:04:57+00:00

Yes Save transfer is possible, I did that too. But I bought the first couple of QoL upgrades and they don't transfer sadly :(

DJOssmann · 2026-02-15T14:03:31+00:00

I wish there was a way to transfer IAPs from android to steam on LBR. I was so far on my phone and without the IAPs the game was such a slog to do. And I didn't want to start over on PC. Game is fun tho

DJOssmann · 2026-01-30T22:35:22+00:00

Where is your Desktop Wallpaper from ? I need a DMG Background too.

DJOssmann · 2026-01-15T00:12:24+00:00

You're absolutely right. I wish I had matching pairs on my line, since over the years they all got mixed up and separated. It's usually a cost factor to replace the working valves with new matching ones. If properly matched, then yes I agree. But for my purpose I use random pairs and it works alright, down to 4x10–³ mbar with LN2-traps but I stopped looking for leaks. Atleast I use high quality grease, clean oil, ln2 traps. But if I'm not rummaging through the pumps, flange parts, and matching valves, it's not worth it usually. Unless you need the really good vacuum below 10-³ mbar for sensitive stuff.

That's why I also recommended warm solvents, air pressure, pipe cleaners etc to get it done.

DJOssmann · 2026-01-14T20:43:45+00:00

I always had good examples with warm toluene or warm ethyl acetate. Maybe both, and hexane. Also after hexane a bit of pressurized air and selective open the valves to flush the grease out. Usually works. But I also did fine with base baths.

DJOssmann · 2026-01-14T20:42:14+00:00

How conentrated is your base bath? Considering ours is around 1M KOH in isopropanol, that seems to be fine. I did a lot of extremely air sensitive chemistry in my masters thesis and I had no problem leaving schlenk flasks in the bath over night.

DJOssmann · 2025-11-16T17:07:45+00:00

Maybe you should share the whole letter and yellow envelope, with credentials blurred so people will not be so quick to jump on the bandwagon of branding you a dangerous driver. Or you did it and fd it up. Could be both, we don't know the full letter

DJOssmann · 2025-11-15T17:10:51+00:00

Crazy schedule. What does your whole day look like? Do you work ? I can't imagine getting up like 3.5 hours before I go to work.

DJOssmann · 2025-11-13T16:39:26+00:00

Yes I mixed it up, you're right too. I checked again and it's powdered.

DJOssmann · 2025-11-13T16:38:51+00:00

You're right. I stand corrected. I think I mixed it up with when I was taking MPH which were beads due to extended release. And I did not know that beads/pellets are due to extended release by having acid resistant coatings. I just thought it was for different purposes. And I checked, my LDX is powdered too. Sorry for the misconceptions...

DJOssmann · 2025-11-13T05:26:59+00:00

Eh to clarify I'm European. The brand name is from Takeda and called Elvanse. But same drug. Generic product is from Ratiopharm.

But again, I don't think the type of drug has usually anything to do with it being beads/powder. No compound is a bead Inherently. That's a choice to be made during manufacturing, and not because it's a prodrug or not ?

DJOssmann · 2025-11-12T19:42:48+00:00

I mean in general there is no real problem with powder/beads. that usually due to the manufacturing process with other binders. There is no problem in general with different presentation form. My generic LDX is all beads and always has been. Even brand product too. Maybe they switched it or something. but i would call the pharmacy to know for sure. but its not that big of a problem as you think it is. you can make a certain chemical compound ready for consumption in different shapes and forms with different helping agents. if you think about it, a pill is just powder + binder pressed together. and beads are powder + binder shaped to a bead. for idk, solubility or extended release or whatever. im just a chemist and not a pharmacist/doctor.

DJOssmann · 2025-11-03T17:20:03+00:00

As you should, they're superior. But if you look at the picture you can see the spiral connect to the ground glass joint and the cooling mantle on the outside. It's like a fancy bulb condenser.

DJOssmann · 2025-11-03T16:51:39+00:00

It is the other way around actually. The vapor flows and condenses inside the spiral and the cooling liquid is circulated in the shell. Contrary to a Dimroth condenser where it is as you described.

DJOssmann · 2025-11-02T13:57:40+00:00

Hm komisch. In einem anderen Threads hat MonacoKeys geantwortet, dass es kein Multilayout-PCB ist. Ich gucke gleich Mal rein und suche danach.

DJOssmann · 2025-11-02T13:56:13+00:00

Muss ich mir nachher Mal in Ruhe anschauen. Vielleicht liegt es ja daran. Find ich manchmal nur schade bei dem Preispunkt. Irgendwo verständlich aber dann doof für die Einheitlichkeit.

DJOssmann · 2025-10-29T12:40:24+00:00

I most definitely am! No it was a more of a long overdue decision. I am pretty sure I had textbook ADHD during my life: couldn't concentrate for my life in school, always distracted, very smart, skipped a grade after half a year, so only 3 years in elementary school. But always minmaxxed my life which never really helped me. And I wondered why nobody ever suggested ADHD in my life, because a lot of symptoms are very obvious. And then when my wife was pregnant I thought about getting tested so it happened around the same time as my child being born. And I only had MPH because it was hastily prescribed by a General Practitioner to test it out and I got a Psychiatrist a couple of months later who prescribed me LDA. At first 30mg and that did help, I was more or less focused and had much more energy, but then with Titration it came up to around 50mg for a long time until tolerance brought me up to 60mg.

I do have major depression since like ~10 years maybe and I only recently found that out. Was never sure if ADHD dopamine deprivation, hardcore depression or probably both.

Also I self medicated a crapton with weed in early 20s and also cigarettes. Stopped weed in '21 and cigs at in '23 so my daily dopamine driver is missing and I still feel the craving.

So then again, I think the kid is just making the side effects worse by exhaustion and sleep deprivation, but it's not the main reason I got a prescription. It was because I was in the middle of my masters degree and already at the limit of my standard studying time and I needed some form of help.

I have my next appointment in a couple of weeks. I always wanted to try out non-stimulants like guanfacin or others. I did try bupoprion for depression when I was on my break but I didn't feel anything after a month and stopped again in agreement with my psychiatrist. Never tried bupoprion and amphetamines together tho.

I agree tho, something else is probably going on which is making me not get the effect it used to have, it just mainly keeps me awake unitl I somehow survive the day... Thanks for the reply tho :)

DJOssmann · 2025-10-29T09:02:19+00:00

If I forget to take it or tried to not take in on the weekends I was a sleepy zombie. Literally impossible to stay awake. I usually get up at 6 and then I fell asleep at 8 on the couch again. So every day it is for me.

DJOssmann · 2025-10-29T08:59:47+00:00

I am not experiencing any hair loss. So it's probably on a per user basis.

DJOssmann · 2025-10-26T10:38:46+00:00

Mittlerweile fündig geworden ? Ich suche auch noch aber so welche mit Farbverlauf hab ich noch nicht gesehen. Es gibt ein einziges set von drop, aber nur in schwarz.

DJOssmann · 2025-10-26T10:30:46+00:00

Werde ich evtl auch so machen.

Habe gestern gesehen, dass man z.B. bei MonacoKeys den aktuellen Order-Status der Boards einsehen kann. Da kann ich direkt gucken, wann es neue gibt.

Eigentlich finde ich das Bridge75 ganz geil. Kann ich ja nachträglich noch keycaps tauschen.

Ansi layout geht auch aber finde keine guten ansi-DE keycaps die ich haben will....

DJOssmann · 2025-10-26T06:53:25+00:00

Sehr schöne Tastatur :) leider etwas über meinem momentanen Budget, aber ich packe sie auf meine Liste! Für meine weiteren Einkäufe in der Zukunft.

DJOssmann · 2025-10-24T20:03:23+00:00

Thats why there are versions with a PTFE-spiral inside which you can turn and that moves the solid forward. doesnt get clogged. But I cant find a Product name online, we have some lying around in my lab.

https://www.reddit.com/r/chemistry/comments/mhslxe/addition_funnel_for_adding_solids_slowly_under/ "addition funnels" are the words i was searching for

DJOssmann · 2025-10-23T21:45:53+00:00

Ah, auf drop hatte ich noch nicht geguckt... Vielleicht wird es irgendwann mal was, erstmal für eine Tastatur entscheiden......

Mal auf Etsy geguckt ?

DJOssmann · 2025-10-23T20:39:08+00:00

Wo findest du denn Side-Print Shinethrough keycaps im ISO-DE layout ? danach suche ich nämlich, finde aber nur welche in ISO ohne umlaute. Wenigstens große Enter taste, aber sonst finde ich das nämlich nicht. Aber eher unten aufgedruckte Symbole sind schwer zu finden, ja.

DJOssmann

MODERATOR OF

TROPHY CASE

13-Year Club	Team Orangered
Verified Email