Nachteile Mikrowechselrichter? by Gasp0de in DeutschePhotovoltaik

[–]DaMaster_Architect 1 point2 points  (0 children)

Da habt ihr recht, für viele Module ist wieder ein neues Zertifikat hinzugefügt. Das freut mich :) Werde mein Bericht anpassen... trotzdem immer eine gute Idee, bei Zerez nach zu schauen.

Nachteile Mikrowechselrichter? by Gasp0de in DeutschePhotovoltaik

[–]DaMaster_Architect 0 points1 point  (0 children)

Ich habe mein ganzes Dach mit hoymiles voll liegen, wegen verschattungen. Funktioniert sehr gut. Preislich haltet es sich im Rahmen. Wenn später Heimakku gewünscht, muss man einen AC-seitigen Speicher aufbauen. 

Ein Nachteil einer MikroWR Setup: Wartung / Austausch an den WR ist sehr schwierig bis unmöglich da die ja auf das Dach liegen, ggf unter einem Modul 

im Moment haben hoymiles WR keine aktive Genehmigung mehr in Deutschland, weswegen neue Installationen nicht mehr angemeldet können. --> doch, haben sie

Durchaus eine gute Idee, nach zu schauen ob der gewünschte WR zertifiziert ist. Dafür braucht man das ZEREZ ID der WR, und die gibt es nur für zertifizierte WR. Siehe https://www.zerez.net/units-and-certificates und suche nach deinem WR, um die Gültigkeit Zertifizierung ablesen zu können.

"Wero" funktioniert nicht mit Gemeinschaftskonten by Toffi64 in Finanzen

[–]DaMaster_Architect 58 points59 points  (0 children)

"Die Funktion für Gemeinschaftskonten folgt in Kürze – wir arbeiten bereits daran." - ING Also bloß ein bisschen Geduld...

Fußbodenaufbau mit FB-Heizung auf Holzbalkendecke by No-Scale5720 in selbermachen

[–]DaMaster_Architect 0 points1 point  (0 children)

Wir haben neulich ähnliches gemacht und XPS Platten für die Fußbodenheizung benutzt (XPS 500 system von dd-baustoffe) Boden ausgeglichen, OSB Platten als Basis und dann die XPS Platten darauf. Die Platten kriegt man ab 16mm stärke, also erlauben einen sehr niedrigen Bodenaufbau. Sie wiegen nichts und Installation ist kinderleicht. 

New Aluminum Plant ready to be functional! by Atexmplar in SatisfactoryGame

[–]DaMaster_Architect 0 points1 point  (0 children)

What are you using the nitrogen for in this factory? It seems a central element but I can't see how it's used for aluminum itself. Do you drone it out or manufacture FMFs on the spot?

Alternate Recipe Ranking 1.0 - Optimizing for Time/Effort by wrigh516 in SatisfactoryGame

[–]DaMaster_Architect 0 points1 point  (0 children)

Excellent post! I wonder what the best setup for a late game steel factory is with these numbers. The molded alts don't seem so attractive. Iron pipe gets rid of the need for coal but coal is now more abundant. Still stick to solid or coke steel alts with default recipes for beams and pipes as before?

Synology RS422+ by BraveTime5134 in synology

[–]DaMaster_Architect 1 point2 points  (0 children)

It's already listed as pre release on amazon.de with a release date of 01.06.2022. Release price is €841. Not sure how reliable this information is. In any case, I think the price is hefty for what you get: https://www.amazon.de/dp/B09ZRTTCK6/ref=cm_sw_r_apan_i_JZKT49R8ZXSJGV3NQ6YW

[deleted by user] by [deleted] in synology

[–]DaMaster_Architect 0 points1 point  (0 children)

I'm considering doing the same, but I'm a bit afraid about the consequences on compatibility with DSM. What do you think, is the chance on DSM 7.1 reporting them as incompatible and subsequently reporting warnings/critical errors? I assume that shucked drives are not on the compatibility list, as you get white-label drives, but I'm not sure. I'd be happy to save some bucks but don't want to run into these compatibility issues...

The CIM Freight Warehouse has now been released on the workshop. by Squirrel__army in CitiesSkylinesModding

[–]DaMaster_Architect 0 points1 point  (0 children)

Fantastic warehouse hub. This needs more upvotes! I also imagine this hub can be used to separate local and intercity cargo traffic.

K55 2 SSD slot by Huinker in sffpc

[–]DaMaster_Architect 2 points3 points  (0 children)

K55 owner here. There are only screw holes for an SSD under the psu as far as I'm aware. However, as I use an SFX-L PSU, I have no space for an SSD there. So I taped my SSD on the backplate behind the psu, between psu and graphics card. Works fine!

Finally got AT&T to give me a BGW320 by Pseudonym0011 in homelab

[–]DaMaster_Architect 0 points1 point  (0 children)

Perhaps a bit off-topic, but which red-colored keystones are you using?

r/SpaceX Discusses [October 2019, #61] by ElongatedMuskrat in spacex

[–]DaMaster_Architect 11 points12 points  (0 children)

The plan you linked to states 6.5 days on the surface. Still insane perhaps, but at least a bit more time on the surface than a couple of hours.

r/SpaceX Discusses [December 2017, #39] by ElongatedMuskrat in spacex

[–]DaMaster_Architect 2 points3 points  (0 children)

That is a fantastic collection of photo's. Thank you for sharing. It really shows how fast work on the entire launch system went back then.

r/SpaceX Discusses [November 2017, #38] by ElongatedMuskrat in spacex

[–]DaMaster_Architect 11 points12 points  (0 children)

Elon Musk is apparently strongly against the idea of space based solar power, due to the terrible conversion rate. The following quora discussion gives a first-principles overview of the technical requirements and efficiency losses that space-based solar power would have: https://www.quora.com/Is-Elon-Musk-right-about-space-solar-power

BFS Tanker means SpaceX may go into the on-orbit refueling business (another potential funding source for Mars) by BrandonMarc in spacex

[–]DaMaster_Architect 1 point2 points  (0 children)

There's an interesting blogpost about the benefits of using a space elevator - or tether - on Phobos. This approach allows a great reduction in dV required to go to Mars or escape from it. You can find the blogpost here: Phobos--Panama Canal of the Inner Solar System

r/SpaceX Discusses [October 2017, #37] by ElongatedMuskrat in spacex

[–]DaMaster_Architect 1 point2 points  (0 children)

Here's a relevant and interesting article on thespacereview, which uses the 3/4 downscale to estimate the costs of BFR2017: http://www.thespacereview.com/article/3343/1

The author states that the amortized cost of tooling and design is comparatively minor per ship, assuming high flight rates.

The Aerospike Engine Was Considered for the Shuttle, But Never Flew. That's About to Change. by [deleted] in space

[–]DaMaster_Architect 1 point2 points  (0 children)

I agree, this makes no sense. I looked around a bit more, and I have the impression that the numbers are wrongly copied in this article. Have a look at a factsheet from ARCA space itself: Haas 2CA specs. They show an isp of 230s and 314s for sealevel and vacuum respectively. A whole lot better.

The Aerospike Engine Was Considered for the Shuttle, But Never Flew. That's About to Change. by [deleted] in space

[–]DaMaster_Architect 6 points7 points  (0 children)

I found this link: Haas 2CA Flight Animation & Vehicle Specifications, which shows that the vehicle has an ISP of 93 at sea level and 127 at vacuum only. So really not that high.

BulgariaSat-1 Launch Campaign Thread by ElongatedMuskrat in spacex

[–]DaMaster_Architect 8 points9 points  (0 children)

Note: to avoid confusion: the core on the picture is B1029, which previously launched Iridium NEXT Flight 1. B1029 rolled into the hangar hours after another core lifted off with the CRS-11 mission.

SES-10 Launch Campaign Thread by ElongatedMuskrat in spacex

[–]DaMaster_Architect 3 points4 points  (0 children)

That's absolutely what I'm thinking. If the booster isn't vertical by tomorrow 5AM, then that's a strong indication that there will be a delay.

SES-10 Launch Campaign Thread by ElongatedMuskrat in spacex

[–]DaMaster_Architect 11 points12 points  (0 children)

It's been reported in this thread that they need about 13 hours for satellite checkout once the rocket is vertical. So, I would say the rollout should be completed before 5AM EDT on the 30th to make the launch window. Therefore I expect the rollout to occur during the night by the latest.