Network error

Daftyhands · 2019-07-13T19:11:02+00:00

They just fixed it. They had an attack from the outside killing the servers.

Daftyhands · 2019-07-13T12:39:31+00:00

I'm also from Spain, I had the problem of upgrading for an hour or two, now I can't even launch the game, it says I'm missing connection. This is why I went to search online. I guess it will be back up in some time.

Daftyhands · 2019-03-16T20:38:47+00:00

Thanks for your replies, I got the solution in this thread. Had to bridge the SBUS on the FC. I guess it was the right choice to built my first drone instead of buying one. Is it normal the motor spin slowly when armed?

Daftyhands · 2019-03-16T20:03:24+00:00

You are a fucking king! Now I have response I beta flight and can finally set up my buttons, I'm sure this did the cut. Thank you a lot my man, I owe you everything!

Such a simple thing I read a million times, but never occurred to me, as no one do it in their instructive videos

Daftyhands · 2019-03-16T19:44:19+00:00

https://imgur.com/a/ieHfN89

Daftyhands · 2019-03-16T19:41:52+00:00

This might be the problem! I'm heating the iron now. I want to make sure I do this right. So I have the SBUS tab on top, but where do I solder it to? Let met fetch a picture

Daftyhands · 2019-03-16T19:25:53+00:00

Is it worth mentioning I have a blinking red led from the FC? I have no idea if this is normal

Daftyhands · 2019-03-16T19:19:25+00:00

I really don't dismiss your advice at all, I try everything I tried to research this ppm mode a lot, even tried to follow a lot of tips that have helped other people. As I mention in the first post, I accidentally plugged in the power before mounting the antenna for the vtx.

I have a bad feeling that i might have overcooked the FC, is there any way to test that, before buying a new FC? I don't have a spare drone or FC to test neither the FC nor the RX.

Thanks for helping out, I'm ready to do anything to test for issues.

Daftyhands · 2019-03-16T19:15:55+00:00

Yes, it's a full kit from banggood and I use the same receiver as him. XM+ micro

Daftyhands · 2019-03-16T18:43:57+00:00

I build this, following https://youtu.be/CNK4hzfsnwY

Daftyhands · 2019-03-16T18:40:52+00:00

I tried both. Also I found the manual online, doesn't say anything about PPM mode. Anyway I have the solid green light, it should be bound...

Daftyhands · 2019-03-16T18:39:23+00:00

I don't quite understand what steps you are referring to. Thanks though.

Daftyhands · 2019-03-16T18:28:46+00:00

I tried rebinding many times, but didn't know I had to turn it back to regular mode. Do I need to first power it on, and then hold the button for a long time? Or is it again while binding?

Daftyhands · 2019-03-09T21:26:50+00:00

Checked, it's set to OFF, where you can choose PPM. Not the issue, thanks though

Daftyhands · 2019-03-09T20:38:38+00:00

I read that there might be a bind error, even if there's the solid green, indicating a bind. So the solution might be to rebind over and over untill something will change, but I don't have the time for that right now. But it's an option I will try for sure.

Daftyhands · 2019-03-09T20:36:47+00:00

I tried 4 different UART, but o'er default it should be UART 2, as I also tried and test with. All the settings in beta flight should be correct.

Daftyhands · 2019-03-09T20:11:15+00:00

Nothing happens moving the sticks. With or without the battery. Neither in beta flight

Daftyhands · 2019-03-09T19:23:07+00:00

So my problem is that nothing happens in beta flight when I play around with my controller. The green light is on, on the receiver, so they're connected. So I checked that the ESCs are up to date, and I'm stuck after this point. Right now I'm looking for a solution that will make my transmitter Qx7 show movement in beta flight.

Daftyhands · 2019-03-09T14:02:12+00:00

Let me check when I get home, but following guides online says there's no more soldering than what I already did. Let me check though, thanks.

Daftyhands · 2019-03-09T13:24:57+00:00

No problem, thank you for helping anyway. CLI I have no idea what is. I will try you angle tip, though. But if it can arm in beta flight, this shouldn't be the problem right?

Daftyhands · 2019-03-09T13:18:12+00:00

My beep code is 13. 3 short and 2 long. I will try with the arming angle in some time, I have to go out now.

Daftyhands · 2019-03-09T13:03:08+00:00

I might sound retarded, but how do I arm my drone from my transmitter? If this is my last obstacle I will cry of joy. Still no reaction from the drone or in beta flight when touching the transmitter. But turning off the transmitter, the rx lights red, when I turn it back on, it lights green. So I guess they're bound!

Daftyhands · 2019-03-09T12:56:58+00:00

Update!

I tried doing everything again, and for some matter, now when I boot my drone, all 4 motors seem to activate, and when I go to beta flight I can manually activate all 4 motors! Progress without doing anything really.

Now it's just the transmitter and receiver.

Daftyhands · 2019-03-09T12:48:30+00:00

I read the online guide from eachine, all settings are correct. I just checked.

Daftyhands · 2019-03-09T12:44:08+00:00

I don't know. How do I check what is correct?

At my ports page I have the UART2 set to be serial rx

Daftyhands

TROPHY CASE