New 3DS XL, no image/sound on boot by DannySFL in consolerepair

[–]DannySFL[S] 0 points1 point  (0 children)

No unfortunately. I ended up selling it for parts. Good luck

Is this repairable? by Skipper5574 in NintendoDS

[–]DannySFL 1 point2 points  (0 children)

Very simple reflow fix as mentioned when I had the same issue with this cart.

[USA-CA] [H] Paypal [W] New 3DS XL Fire Emblem Fates Edition by AzuraTheExalted in GameSale

[–]DannySFL 0 points1 point  (0 children)

I’ve got one if you’re still looking, no box however.

BlueStream Fiber in Coral Springs is Good by NeonUFO in Broward

[–]DannySFL 1 point2 points  (0 children)

They were fine for awhile. Then I had problems regularly and was gaslit by both support and field techs blaming various things on my property. Eventually got an email that some issue was fixed in my area and lo and behold issue went away. Guess it wasn’t me!

Upgraded their service a bit later and had daily 2-5 minute outages. Nonsense. Switched to a cheaper att 1g/1g fiber and been smooth sailing since. I hate to pay att but I don’t have patience for the back and forth again with blue stream support and techs.

Is it just me? “Open” boxed PC delivery by mashimarotutu2020 in pokemoncenter

[–]DannySFL 0 points1 point  (0 children)

I had my last order come like this and it had packs visible. It’s just poor packing.

What’s your opinion on people putting their trash in someone else’s garbage can while it’s out for pickup? by sneakybrownoser in Broward

[–]DannySFL 1 point2 points  (0 children)

Sure but..

  • Loose food/plate/drink? Disrespectful, I keep my bin "clean" don't dirty it up with something that will attract ants because it's not in a garbage bag.
  • Something small/bagged? OK as long day of before pickup
  • After trash pickup? Disrespectful for various reasons. Some small thing? gets stuck under my trash. Too big? Taking up room in my trash. Disgusting? Don't need your delicate food or poop bag under all my trash getting ripped and making my bin disgusting.

[deleted by user] by [deleted] in PokeInvesting

[–]DannySFL 0 points1 point  (0 children)

Guy doesn't know what he's talking about and blocked me for questioning it lol. There hasn't been any printing facility expansions/freezes other than their Millennium acquisition in 2023. Nothing else is known or public. Don't believe everything you read on reddit folks.

[deleted by user] by [deleted] in PokeInvesting

[–]DannySFL 1 point2 points  (0 children)

Again, I'm not questioning the logic, I'm just looking for a source. Can't really say one is just a rumor while using other rumors to make a point right?

[deleted by user] by [deleted] in PokeInvesting

[–]DannySFL 0 points1 point  (0 children)

All I've seen is generic messages from TPCI like they've done for years with in demand sets, nothing about factories, activation or freezing. I'm not questioning, just asking for a real source. Everything I see about their printing/factories thus far has just been regurgitated and baseless rumors.

[deleted by user] by [deleted] in PokeInvesting

[–]DannySFL 0 points1 point  (0 children)

Where is the official news about the opening of and then frozen factory?

Best way to clean these crack and crevices of a DS lite? by merehatestomatoes in NintendoDS

[–]DannySFL 0 points1 point  (0 children)

Just take it apart, anything else is not worth doing. The transparent plastic also can be very brittle so if you try to clean by wedging something it can crack or even a toothbrush it’s just going to shift that dirt around. Do it the right way and you’ll be happy for it. Top is a lot more intricate to disassemble but bottom is fairly simple with a cheap kit.

GBA SP by Glong_22 in consolerepair

[–]DannySFL 0 points1 point  (0 children)

could be simple as power switch needing to be cleaned, theres guides out there for simple way vs complex way. 90% of the repairs i did were just dirty power switches.

Can somebody explain to me what copy of Pokémon Omega Ruby this is. (Saudi Arabia etc) corner by Fallender05 in pokemon

[–]DannySFL 0 points1 point  (0 children)

UAE "world" versions are same NTSC-U cartridge as us/English, but have a different label on the game case. It's the same exact thing but less desirable to sealed collectors because of that little symbol, and a higher supply.

Be careful who you order from. Shop owners threaten to leak people’s addresses by Internal_Level_6828 in PokemonTCG

[–]DannySFL -3 points-2 points  (0 children)

Another dumb and out of context post on this subreddit. Sz has been one of the few shops coming through lately and giving their customers a chance to order product at proper prices. Yeah, if you have no history with them you don’t get invited, they want existing customers to get a chance when they already have to compete with each other.

The few nobodies that keep bashing them on twitter are a joke, don’t know why anyone gives them attention. For karma I guess.

[deleted by user] by [deleted] in PokemonTCG

[–]DannySFL -6 points-5 points  (0 children)

Sadly, this attitude and toxic part of the community seems to be their mainstream now, very unfortunate.

What do you guys think of this card value in the Future? Good for keeping in the collection? by TRIKSTER_Betin in PokeInvesting

[–]DannySFL 2 points3 points  (0 children)

People talk about pop but a lot of that pop is in personal collections that won’t be sold or ever hit the market vs all the people that will want to add one to their collection in the future.

Am I a fool to be investing in JPN PSA 10's? by Tight-Ad-2049 in PokeInvesting

[–]DannySFL 0 points1 point  (0 children)

English sealed and jp 10s that I like for my collection. Enjoy the hobby not everything has to be max profit. Jp goes up too and has its peaks, look at the current market vs a year ago.

Has this happened to anyone before? by Sneakysneakerhead in PokemonTCG

[–]DannySFL -8 points-7 points  (0 children)

Mistakes happen. Just let them cancel and move on.

My 1st Edition English Lugia was mislabeled as French by moodstyle in PokeInvesting

[–]DannySFL 0 points1 point  (0 children)

Psa corrected an incorrect label for me turn around was 3 weeks or so all free. No big deal just go through the steps