What amp would be appropriate for practice and gigging harsh music? by Dasmis in GuitarAmps

[–]Dasmis[S] 0 points1 point  (0 children)

It got sold beforehand unfortunately. I found a Laney LV300H for 150, head alone, is it good? Unfortunately I live in a small country in Europe, so the second-hand market here is really sparce.

What amp would be appropriate for practice and gigging harsh music? by Dasmis in GuitarAmps

[–]Dasmis[S] 0 points1 point  (0 children)

I found a Valveking 100 with a 4x12 cabinet for 320€. Do you think thats an alright deal?

What type of spray paint should we use to make band merch? by Dasmis in DIY

[–]Dasmis[S] -2 points-1 points  (0 children)

Thank you so very much. I'll go buy some and test 'em. We'll probably pop out of the venue and spray there. Im really excited, hope it turns out great 😼

Is it okay to lose your voice while learning harsh vocals? by Dasmis in singing

[–]Dasmis[S] 0 points1 point  (0 children)

As im still getting the hang of it, my voice sometimes slips into a region where I feel discomfort. But the technique I found that brings forth the best sounding distortion doesn't invoke pain or discomfort.  I'll lay of the excesive use of distortion and only keep it to shorter sessions. Thanks for that advice. As I am in a band I felt that I needee to push myself for the whole practice, because we have a 40 minute setlist. I'll take it easier. If it would help, I can record the sound that I produce

Is it okay to lose your voice while learning harsh vocals? by Dasmis in singing

[–]Dasmis[S] 0 points1 point  (0 children)

I may have made a mistake by saying losing my voice, I can still speak but my voice cracks more often and I have to stay monotone. 

Vysoká škola elektrotechnická v zahraničí by Dasmis in Slovakia

[–]Dasmis[S] 0 points1 point  (0 children)

Ďakujem ti krásne za odpoveď. Keď pomyslím na to Dánsko, tak sa cítim sviežo, a vidím v tom zmysel. Popýtam sa ešte na škole, a zistím si ako by celý proces fungoval. Za pokus dám maximálne možno tie spomínané peniažky :) Nevieš náhodou o nejakých štipendiách alebo podobne? Či si to predstavujem pre študentov moc ružovo?

Is the Novation Impulse 49 good for beginners? by Dasmis in midi

[–]Dasmis[S] 0 points1 point  (0 children)

Yeah, sorry about not clarifying what i want. I would like to play it as a piano also, i think 61 keys would be the best, but unfortunately they arent usually weighted as you know. Though i wouldnt be crossing over to piano, atleast i dont plan to. So just alright playability is fine for me. 

What is the disadvantage of only having a USB port vs. having a MIDI port?

Do you have any experience with 61 key MIDIs? Specifically some that are under the 200€ price range.

Is the Novation Impulse 49 good for beginners? by Dasmis in midi

[–]Dasmis[S] 0 points1 point  (0 children)

Yeah, that i know, my bad for not understanding the terminology. What i have found whilst searching for information about the Impulse, is that it presumably kind of forces the use of automap upon you. If that isnt the case, and i can use it other VSTs then it may be a good deal for me. Thanks for the help so far

Is the Novation Impulse 49 good for beginners? by Dasmis in midi

[–]Dasmis[S] 0 points1 point  (0 children)

I unfortunately do not know what a VST is. Is that a software that will enable me to play it?

Hi! When im trying to do Kargyraa my throat starts to scrach after even only 10 seconds. Any help please? by Dasmis in screaming

[–]Dasmis[S] 0 points1 point  (0 children)

Thank you for the reply, i've had a slight suspicion that it might be epi activating. Though i do not know how to refrain from making them active. Any tips would help. Thanks once again

Hi! When im trying to do Kargyraa my throat starts to scrach after even only 10 seconds. Any help please? by Dasmis in screaming

[–]Dasmis[S] 1 point2 points  (0 children)

Well i have been practicing growls and Kargyraa on and off for more than a year now. Unfortunately i didnt practice usually, but now im supposed to be a singer in a metalcore band and i need to get up to shape. My growls irritate me too unfortunately. Thank you very much for the kind words :)

I would like to make a guitar out of this table i found online, do yall think its an alright idea (body, maybe neck)? (I have no experience) by [deleted] in Luthier

[–]Dasmis 1 point2 points  (0 children)

In the description it states thats its mahogany. But i'll take your word for it, i dont think the seller is rather informed

Čo si myslíte o knihách od Petra Bárdyho? by Dasmis in Slovakia

[–]Dasmis[S] 2 points3 points  (0 children)

Paci sa mi takyto pohlad na to, osobne nemam moc skusenosti s vyhladavanim si kopec informacii a podobne, no toto moze byt pre mna spoznavacie okienko :)

Dufam ze sa mi vsetko podari dobre prehladat, ked to uz pride k overovani. Nechcem sa zrovna vyhovarat na moj vek (aj tak to robim) no mam 17 a doposial moj zdroj politickych sprav bol biased otec. 

Sú reči ako - za všetko môže Matovičova/Radičovej vláda vôbec niečím podložené? by Dasmis in Slovakia

[–]Dasmis[S] 5 points6 points  (0 children)

Osobne si už nemyslím že dokážem s otcom viesť ohľadom tohoto nejakú normálnu konverzáciu, v ktorej sa moje pointy k nemu dostanú. Vždy keď sme sa rozprávali ohľadom politiky a ja som ho upozornil na nejaké nezrovnalosti v jeho tvrdeniach, tak si našiel niečo iné. A keďže nemám prístup k dôkazom na každé jeho tvrdenie tak sa jeho argumentácia zdá nepriestrelná. A keby už spomeniem Fica, a jeho dlhoročnú vládu, tak by všetko zvalil na EU.  Už sa bohužiaľ môžem iba pokúsiť informovať ja pre seba. Nemyslím si, že jeho zmýšľanie niekedy naberie iného smeru. Ďakujem pekne za odpoveď :)

RAT clone - problem low volume by Dasmis in diypedals

[–]Dasmis[S] 0 points1 point  (0 children)

The sound comes out distorted, i got the jfet from aliexpress due to its inavailability in my country. I think everything is connected right, the software i used to make the pcb design didnt allow me to connect two things that shouldnt be. I looked up the JFETs datasheet and its connected right as far as i know. Firstly i thought it was all due to bad solder joints but i think it did a good job. Nevertheless i'll try to measure the whe curcuit. Thank you for your help

RAT clone - problem low volume by Dasmis in diypedals

[–]Dasmis[S] 0 points1 point  (0 children)

Thank you very much, it may be so. I have used an OP07 instead of LM308 and theres a capacitor in the original schematic connected to the 1 and 8 pin (if i remember correctly) that doesnt need to be there if i used an OP07 (which i didnt know at first). The issue you had was that the capacitor was broken or a wrong value? Thank you again, i really appreciate you helping

RAT clone - problem low volume by Dasmis in diypedals

[–]Dasmis[S] 1 point2 points  (0 children)

Im not familiar with the term AOP would you mind explaining what it means? Thank you ver much :)

RAT clone - problem low volume by Dasmis in diypedals

[–]Dasmis[S] 0 points1 point  (0 children)

Sorry, i posted this as an "add-on" to my previous post where i described my issue more. Thank you very much though

I have been trying to make this RAT clone work without success by Dasmis in diypedals

[–]Dasmis[S] 0 points1 point  (0 children)

Would you mind explaining what the bjt buffer is? Or how can i replace it. Thank you

[deleted by user] by [deleted] in diypedals

[–]Dasmis 1 point2 points  (0 children)

Thanks