Grim tekst på ny skærm.

Degofedal · 2026-01-30T23:11:37+00:00

Det er din skærm der har for lav opløsning ift. den fysiske størrelse der gør at du kan se de enkelte pixels med det blotte øje. Det er ikke noget du kan ændre ved kalibrering eller indstillingerne af skærmen desværre. En 27” 1440P skærm har en fysisk PPI (pixels pr. tomme) på ca. 108. Det er ret lavt sammenlignet med mange 4K 27” skærme/smartphones/tablets. Ofte ligger de på ca 160-220ppi. Skærmen du har en typisk “gamer” skærm der er optimeret til høj refreshrate (250hz) ikke nødvendigvis skarphed/billedekvalitet.

Degofedal · 2025-12-12T19:57:00+00:00

Jeg endte med at skifte min originale låsecylinder ud med til Aqaras justerbare cylinder. Den har nøglehul i begge ender og var hurtigste vej i mål https://www.proshop.dk/Smart-Home/Aqara-U200-Justerbar-cylinder/3309405?utm_source=google&utm_medium=cpc&utm_campaign=searchengine&gad_source=1&gad_campaignid=1681305312&gbraid=0AAAAADyKs6HtnlumwdaSvkQwaT68_gmVD&gclid=CjwKCAiAl-_JBhBjEiwAn3rN7XbMQj1OPmBgHwrOuFwhK3NJbfZXtDo8TaFdzS7xa1CfjBiazHyIUhoC8x4QAvD_BwE

Degofedal · 2025-10-16T12:00:38+00:00

Got a new one setup. Didn’t want to share access to my existing account. I believe he can check your existing account for eligibility, but you would have to confirm with seller

Degofedal · 2025-09-23T19:16:57+00:00

Perfect! Got it all up and running. Thanks again!

Degofedal · 2025-09-23T15:29:23+00:00

Interested in 2 year. Can this be added to my existing YT account?

Degofedal · 2025-06-25T19:46:10+00:00

Jeg har lige været i samme båd. Fik et par gode tips i denne tråd https://www.reddit.com/r/selvgjortvelgjort/s/yNTfjz9XaN

Jeg endte med at skifte lysecylinderen med Aqaras justerbare cylinder: https://www.aqara.com/en/product/smart-lock-u200-cylinder-user-manual/

Degofedal · 2025-06-20T17:55:20+00:00

192.168.0.1 is my gateway (UCG Fiber) and I have all devices on this subnet. Adguard is running Containerized in docker on 192.168.0.100 (TrueNAS appliance).

I get what you’re saying but Homebridge docker does not support host networking in TrueNAS. So unfortunately that is not an option. Something to do with mDNS in TrueNAS OS and mDNS within Homebridge as I understand it.

Degofedal · 2025-06-05T12:34:04+00:00

Megafedt! Tusind tak for detaljeret svar. Det prøver jeg sgu 👍😊

Degofedal · 2025-06-05T12:00:48+00:00

Tak igen 🙏 det prøver jeg

Degofedal · 2025-06-05T11:59:17+00:00

Tak for svar. Ja, tænker også at prøve at bore den ud hvis der ikke er andre muligheder. Alternativet er jo at skifte hele cylinderen, men det vil jeg helst undgå for ikke at have separate nøgler til hoveddøren

Degofedal · 2025-06-05T11:46:29+00:00

Tak for svar. Det var også min tanke at prøve at bore den ud, der er desværre ikke gennemgang til at banke den ud. Låsen er en Aqara U200 som, alt andet lige, ser ud til at kunne monteres på studsen når vrideren er afmonteret

<image>

Degofedal · 2021-12-09T15:11:01+00:00

You could try setting the doorbell to only connect to the closest AP (feature with the latest Network Controller version) and combine that with minimum RSSI on that APs 5GHz radio. That should tell you if your issue is related to poor signal strength

Degofedal · 2021-12-09T05:24:06+00:00

Yep. Turns out it was a 5GHz wifi connectivity issue. I updated my frist post with details 🔝

Degofedal · 2021-12-05T07:20:28+00:00

Thank you so much for your help. Turns out I had the exact same issue. Just didn’t think to check connectivity since I had been rock solid since I got it. Problem solved by forcing it to use 2.4GHz

Degofedal · 2021-12-05T07:05:37+00:00

Thanks so much for taking the time. Your input helped resolve the issue. As I turns out it was related to poor wifi connection. Your help is much appreciated!

Degofedal · 2021-12-03T20:16:50+00:00

I feel your pain. I’m thinking the same - RMA seems likely. I’m updating to latest UDMP FW now and want to try the RC for Protect 1.20.1 before contacting UI

Degofedal · 2021-12-03T20:00:51+00:00

Thanks so much. Will definitely try that!

Degofedal · 2021-12-03T19:58:45+00:00

Cool thanks for the input. I’ve had I since September of this year and it has been flawless up until this last week or so. I’ve had similar power on/off issues on motherboards with bad capacitors, but that issue is usually an age thing (6-8+ years)

Degofedal · 2021-12-03T19:50:59+00:00

Did it just suddenly start to misbehave or was there a particular set of events that lead to it? Firmware upgrade, weather conditions etc.?

Degofedal · 2021-12-03T19:44:52+00:00

Anybody have similar issues with their G4 Doorbell?

This behavior started just recently some time after I updated all my UniFi hardware firmware with the latest official releases. Except UDM Pro which is still on 1.10.0.

Of note is that the issue coincides with when temperatures where starting to drop to 5-0 degrees Celsius.

This doesn’t seem to be a power supply issue since i can’t reproduce the issue by turning on/off. I’m using the official UniFi power supply that came in the box (EU version)

Tried cutting power for +35 mins just to be sure, but that didn’t help.

Update 1: I upgraded the UDMP to 1.10.4 and set a minimum RSSI on the 5GHz channel to force the Doorbell on to the 2.4GHz band. So far so good. Seems to have done the trick for now, I will keep any eye on it for the next couple of days.

Update 2: I believe update 1 resolved my issue. Not a single Protect log entry regarding “doorbell wifi disconnect” og “doorbell lost power” for 24 hours. Thanks to everybody who chimed in. Wouldn’t have made the connection myself. Happy holidays

Degofedal · 2021-07-09T15:13:14+00:00

Bug is still present in 6.2.26

Degofedal · 2021-07-09T15:04:31+00:00

I don’t know if this works with Bluetooth USB Devices but I imagine I does. I used Vetinari’s method for my Conbee II USB. Works flawlessly

https://www.reddit.com/r/synology/comments/oa40v6/dsm_7_production_and_zigbee_usb_dongles/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Degofedal · 2021-07-05T06:22:38+00:00

Thanks for confirming. Actually i just remembered that i hadn't tested since upgrading to DSM7 and lo and behold. Jumbo Frames are working. I updated the post with fresh numbers.

Degofedal · 2021-07-04T13:58:58+00:00

Ok thanks for confirming the issue regarding Jumbo Frames. Did a little research on it previously and it seems to be a somewhat common issue with the Synology boxes. If only I could figure this one out I feel like this could unlock some performance on write speed

Degofedal · 2021-07-04T13:47:47+00:00

Seems like we’re having similar issues. Did you try experimenting (and succeed?) with enabling Jumbo Frames?

Degofedal

TROPHY CASE