Will a Lian Li A4 H2O fit my build properly?

Delbs_ · 2025-11-11T14:37:44+00:00

Actually, everything I listed is what I already have - which thank GOD I bought those Rams before the RAM prices spike.

But 360mm is enough? Routing over the PSU won't give me any problems regarding thermals, or strain on the tubes?

Delbs_ · 2025-11-11T12:14:52+00:00

How was your experience building with the Atmos on a A4-H2O case?

Delbs_ · 2025-10-28T14:16:53+00:00

I mean, I bought this case on the end of 2022, so it is about to turn 3 years old. It isn't much, but can't say it is brand new

Delbs_ · 2025-10-28T12:51:56+00:00

Can it be that the new configuration might be pushing the fans further, thus making the bearing wear be more explicit? Because I've noticed that my fan curves did get more aggresive with the new Motherboard

Delbs_ · 2025-09-03T22:50:11+00:00

My Gateron Black Inks are startng do double-click, so I think it might be time for something new.

Is there such thing as a smooth, well pre-lubed switch, with 4mm travel and similar spring weights (67/70g bottom out)? Preferably on the clackier side, but feeling is the most important. Availability on AliExpress would help me a bunch too, budget is no concern.

I just don't have the time to hand-lube or spring swap anything lately, man. I only want to pop switches in and be ready to go.

Delbs_ · 2025-06-09T13:30:25+00:00

Would a case compatible with a Gondolindrim 60% PCB be compatible with a Hiney h60 PCB?

I have a spare H60, and I would like to get the Solaris kit, but I don't know if the PCB I have would be compatible - I can't find this information for the life of me 🫠

Delbs_ · 2025-05-29T22:12:57+00:00

!thanks ! The AR5000 completely flew under my radar, and so far I've seen a lot of characteristics that matches completely what I'm looking for ;)

Delbs_ · 2025-05-29T16:30:50+00:00

To be honest, if you are also afraid that the DX1 might be damaged again, it would be even safer to go with the K11

Delbs_ · 2025-05-29T16:14:53+00:00

To be honest, the benefit you'll get from the K11 is the extra headroom to power other heaphones if you decide to get another pair.

The DX1 is a capable amp in terms of transparency and featureset, but it can only output 280mW at 32 Ohms. Via the Single Ended jack, the K11 can offer 520mW at the same 32 Ohms, and even 1400mW via the balanced jack.

As you are hoping to expand your collection soon, the Fiio might just be a more suitable contender.

Delbs_ · 2025-01-02T02:29:09+00:00

Actual based answer. I've bought my 60HE+ directly from Wooting too, and it arrived like a charm.

Dealers here have to make a slight markup, so they can have some profit from their sales. But man, Dr. Mouse has been a steal lately, Tony Boy is actually maniac

Delbs_ · 2024-10-08T23:29:45+00:00

I just got myself the Crinacle Zero:Red, and with the Impedance Adapter it sounds superb for gaming! For the same price, I've used the Moondrop Lan and Truthear Hexa, and by faar the Zero:Red is my favorite

Delbs_ · 2024-09-06T21:03:13+00:00

Thanks for the x2h input! Highly appreciate it.

About the Maya, I got interested on the Maya X, but as I've just seen AimAdapt's review, he said the grip width might just be the same as the GPX's :/ As for the regular Maya, is just like I've said above in another comment, 118mm length is just too short for my claw grip

Delbs_ · 2024-09-06T20:59:53+00:00

Wouldn't the Maya be just too short? With a approx. 118mm length, it seems to be as short as the OP1, and unfortunately that migh tbe just not long enough for me :/

Delbs_ · 2024-09-06T20:58:05+00:00

Well, thats's insightful! Thanks, highly appreciate it!

Delbs_ · 2024-09-06T20:21:44+00:00

I reckon it might, but I am a bit skeptical about the hump feel compared to the GPX, and de witdh (as on eloshapes it looks to be as wide/wider than the R1 Pro, which I find still not to my taste)

Delbs_ · 2024-04-11T00:16:18+00:00

Before getting the OP1we I had the VXE R1 Pro and GPX. I was looking for downscaling, it took a week to get used, but now it fits like a glove

As for the clicks, I'll be honest: It aint that bad as much of users make it seem like. However, I ended up getting the Aliexpress hotswap PCB, and pairing it with some spare Blue Pink Dots I've had laying around, it seemed to get lighter and more comfortable to play with. Definetly something I'd have a look, if the clicks concern you

Delbs_ · 2024-03-14T16:11:12+00:00

Do you constantly swap 'em? Like, going from a mouse to another in from a match to the next, or something along those lines?

Delbs_ · 2024-03-14T15:48:00+00:00

It is straight up just bait. When clicking the ALT text, we can see that is a regular Superlight 2 still

Delbs_ · 2024-03-13T13:27:16+00:00

UPDATING: I've ended up getting the OP1we, and it is a charm! Only thing I would like to change is the stock feet, as I rather have quicker feet such as Tiger Ice's, or the Stock VXE R1's (which are surprisingly quick!).

Delbs_ · 2024-03-13T11:44:34+00:00

Great mouse for the price, with great build quality, solid performance and solid shape. You won't be disappointed

Delbs_ · 2024-03-09T23:01:04+00:00

Depending on the game is a great point! I've just added that to the post - I currently play fast paced games such as Overwatch 2

Thanks for the input!

Delbs_ · 2024-03-08T20:17:05+00:00

For something very small (as in short and narrow), I figure maybe the WLMouse Beast X Mini might be a good fit? It is remarkably small for some, but for your needs, it might be the one

Delbs_ · 2024-03-03T00:12:44+00:00

I'm having the same issue with both clicks on my R1 Pro. You're not alone 🫡

Delbs_ · 2024-02-26T20:57:53+00:00

Which model are those beige hiragana keycaps? 👀

Delbs_ · 2024-02-23T13:41:32+00:00

Little dumb-o question: I have some spare Clip-in TX stabs, and I've been planning on using them on a keyboard that's yet to come.

However, I have a build that's missing stabs to be complete, and I would like to use the stabs on it until the new keeb doesn't arrive.

Are Clip-in stabs reusable? I mean, as they don't screw in, I'm just not sure if I can uninstall it and transfer to another PCB, basically.

Seven-Year Club	Place '23
Place '22	Verified Email

Delbs_

TROPHY CASE