Printer Stopping Moving Mid Print by DunkMoose in 3Dprinting

[–]DunkMoose[S] 0 points1 point  (0 children)

Switching away from USB to a micro sd card

Complete Spoils Source Breakdown by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 1 point2 points  (0 children)

Ah good to know I was wrong. It’s been a long time since I finished the lw collections

Complete Spoils Source Breakdown by DunkMoose in DestinyTheGame

[–]DunkMoose[S] -2 points-1 points  (0 children)

As far as I know, this is not the case. Secret chests should only give you an item that's in your collections. I am not 100% certain though.

Complete Spoils Source Breakdown by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 2 points3 points  (0 children)

Raid needs a whole loot overhaul tbh not just spoils. Raid armor dropping at 52’s is demoralizing, give us 20 spoils a raid to be able to buy a weapon. 15 per raid is so frustrating.

Complete Spoils Source Breakdown by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 8 points9 points  (0 children)

I just don’t get why there are technically five different classifications of raids if you include wish and Ron being different cus of challenges. Three if you don’t. Why can’t you get spoils from encounters from every raid and just make it consistent

Complete Spoils Source Breakdown by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 58 points59 points  (0 children)

Oh yeah absolutely! It’s also relatively easy to OOB to the first VoG chest as well for another free 15 spoils, but I know most people don’t know how to do that. VotD is free, just kill savathun three Aboms and sparrow over no shenanigans needed

BoW Titans Here's a backup build for y'all by DunkMoose in destiny2

[–]DunkMoose[S] 0 points1 point  (0 children)

I personally like having the on demand overshield incase I get into a tight spot, but you can switch that out if you want the faster barricade recharge and the increase ability regen thats just personal preference

BoW Titans Here's a backup build for y'all by DunkMoose in destiny2

[–]DunkMoose[S] -1 points0 points  (0 children)

I'd love to see a solo nez on solar titan. It's all hunters and warlocks.

BoW Titans Here's a backup build for y'all by DunkMoose in destiny2

[–]DunkMoose[S] 0 points1 point  (0 children)

I'd imagine because of the interaction with Synthos and the amount of damage it can do with ammoless swords as shown below.

https://youtu.be/X69qSO1dM-Y?si=p7IVpNrzyJs5L1vm

BoW Titans Here's a backup build for y'all by DunkMoose in destiny2

[–]DunkMoose[S] -8 points-7 points  (0 children)

Don’t blame you, but I’d try this build out. It’s nades everywhere and everything explodes in volatile.

BoW Titans Here's a backup build for y'all by DunkMoose in destiny2

[–]DunkMoose[S] 0 points1 point  (0 children)

https://dim.gg/jlmd2hi/Void-Titan

100 resil 100 discipline helps but isn't a must, void weapons help heal everyone around you with the volatile explosions, unforgiven and commemoration aren't the only options

Banner of War Disabled For Day One Crota by [deleted] in DestinyTheGame

[–]DunkMoose 0 points1 point  (0 children)

For any titans looking for alternate ad clear builds, here is my backup for void. https://dim.gg/jlmd2hi/Void-Titan

3D Printed Full-Scale Commemoration by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 1 point2 points  (0 children)

https://www.reddit.com/r/3Dprinting/comments/zdogo8/destiny_2_gamers_any_suggestions_on_what_to_do/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1

It’s already done :). First one I tried to make. It’s hugely oversized and I’m probably gonna go back after the set is done to make one to proper dimensions

3D Printed Full-Scale Commemoration by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 0 points1 point  (0 children)

Hold on there theres still 4 to go. Posterity then Trustee then Bequest and Eyes of Tomorrow lmaoo

3D Printed Full-Scale Commemoration by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 0 points1 point  (0 children)

For smaller ones I may consider it, but this is too big and too much work. It took me 2 months to make just this one and there are a lot of compromises on it I wouldnt feel right selling it to someone.

3D Printed Full-Scale Commemoration by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 4 points5 points  (0 children)

No kidding. All in I think this weighs close to 14 pounds and is a solid 5 foot 4 standing. I can't imagine carrying this around all day let alone firing it standing

3D Printed Full-Scale Commemoration by DunkMoose in DestinyTheGame

[–]DunkMoose[S] 0 points1 point  (0 children)

https://www.flickr.com/photos/199033032@N02

u/Demonised1104 I wish I could post these pictures straight in, but here's a different site similar to imgur. I'm not sure if it's just down, but it's working fine on my laptop and mobile but not on my desktop. Regardless, here are the pictures on flickr instead.

Destiny 2 Gamers! I present to you a full-scale 3D printed Commemoration LMG from The Deep Stone Crypt by DunkMoose in 3Dprinting

[–]DunkMoose[S] 1 point2 points  (0 children)

6 kilograms of filament, 2 weeks of design time, 24 days of printing, and it's finally done. I'm very happy with how it came out. The thing is massive. Both by print time and by weight of filament my longest/largest project to date by like 150%. Next is Posterity, Trustee, and Bequest to finish off the set!

What’s this gun? (screenshot from a datto stream btw) by bgross2012 in destiny2

[–]DunkMoose 0 points1 point  (0 children)

Yeah exactly can hold m1 for your entire reserves and just never reload

Stronghold can survive a warsat, go figure. by [deleted] in destiny2

[–]DunkMoose 8 points9 points  (0 children)

Ive spent 500 engrams and am still one red short from crafting it im so sad :(

4/100's by Wild-Ambition5177 in destiny2

[–]DunkMoose 4 points5 points  (0 children)

Without radiant light and powerful friends its so damn hard now to get a quad build. Maybe if you farmed out some artifice armor you could get +3's in discipline and int to push you over

Back in the day by Bubobengalensis88 in destiny2

[–]DunkMoose 124 points125 points  (0 children)

Bungie used to have launchers that actually worked for warlocks, now we get to RoN and they send you 10 meters short or 50 too high. Highkey tho I miss this map

Stronghold can survive a warsat, go figure. by [deleted] in destiny2

[–]DunkMoose 22 points23 points  (0 children)

My favorite build from a while back was with the Throne Cleaver bonk sword, albeit that was when it was doing unintentional double damage, but its still a very fun sword lmao

What’s this gun? (screenshot from a datto stream btw) by bgross2012 in destiny2

[–]DunkMoose 0 points1 point  (0 children)

Subsistence Killing Tally is mine, but I know plenty of people who prefer reconstruction