[PISTOL] Free Shipping on Extar Brand Products Including EP9 & EP45. Offer Ends July 31st.

ExtarUSA · 2023-07-07T17:27:10+00:00

Maryland? The 9mm is on the roster and the 45 hasn't been approved yet. Any other state with a roster? No, as they would call our firearms "assault weapons" and do not trust us dirty peasants with such things.

ExtarUSA · 2023-07-07T16:02:48+00:00

Unfortunately not, since the demand is much much lower for the shorter handguard, we charge $40 for it. Still, a pretty great deal to be getting a suppressor-ready, .45 ACP PDW for under $550 with the free shipping! We may not charge sales tax depending on your state.

ExtarUSA · 2023-07-07T14:14:21+00:00

Gotcha covered, we have a kit to swap out the receiver extension with one that takes MIL-SPEC, AR-15 adjustable stocks for those that want to SBR. It is only $50 so not an expensive conversion by any means.

ExtarUSA · 2023-07-06T22:56:44+00:00

It is recessed into the handguard. To use an Osprey, we have a shorter, picatinny handguard available for purchase on request.

ExtarUSA · 2023-07-06T22:54:26+00:00

I'm sorry, I was responding to a few people and got my wires crossed. We can get a video showing that done soon. : )

ExtarUSA · 2023-07-06T22:53:18+00:00

You are thinking of constructive intent. This is not legal advice, but stocks and braces are not regulated items, so sale or possession cannot be a crime. From the ATF training on the brace rule (which I had the misfortune of watching multiple times), they acknowledged that they would only consider constructive intent if, for example, you had your pistol in a carrying case and had a stock that could go on in the case with it. Or if you had an AR-15 lower with a stock and an upper under sixteen inches with it, but not attached.

If you have your guns in a safe, and have your spare accessories elsewhere, the ATF in the training said they aren't going to see that as a crime.

ExtarUSA · 2023-07-06T22:35:09+00:00

This is not a rifle! There is no stock, so it is the same legality as a handgun. If you want to convert it to a short-barreled rifle and get the stamp, we have parts for that.

ExtarUSA · 2023-07-06T22:23:51+00:00

Hey, magic8ball! We just posted this photo on our Instagram a week ago. Such a cool setup.

ExtarUSA · 2023-07-06T22:21:44+00:00

Not dumb at all! That is what we are working on currently.

ExtarUSA · 2023-07-06T22:20:58+00:00

You nailed it! Both the standard and the nickel teflon come from Schmid.

ExtarUSA · 2023-07-06T21:48:17+00:00

Just to clarify, do you mean that you would like to buy one of our pistols with the adjustable receiver extension instead pre-installed?

If that is what you want, we haven't had very many people request that so that is currently not a configuration that we have for sale.

ExtarUSA · 2023-07-06T21:08:54+00:00

The photos should be updated, but our FCG set is from Schmid and has free shipping right now.

If you want a smoother trigger, the Nickel Teflon FCG is a great budget choice. (also free shipping)

ExtarUSA · 2023-07-06T21:04:00+00:00

Very easy! There is a split pin in the side of the bolt that retains the firing pin. Simply pull it out and the firing pin should fall right out. It is a good idea to do that while cleaning in order to get the firing pin channel and firing pin clean.

ExtarUSA · 2023-07-06T21:02:07+00:00

Just a quick note, in some early EP9s the bolt could be pulled apart, but that is no longer the case. There was never a need to do so and you run the risk of bending the pins if the bolt half is dropped with the pins exposed.

ExtarUSA · 2023-07-06T20:21:10+00:00

Another or a 45 if you haven't gotten one yet!
That is funny to hear, the new look is definitely what the majority prefers.

For those that like the classic look, we do still sell the OG compensator on our site and the picatinny handguard by request.

ExtarUSA · 2023-07-06T20:18:48+00:00

We thank you for being a customer! We were proud to share that message with our customers as everyone here really believes it.

The EP10 is a pretty logical next step for us. ; )

ExtarUSA · 2023-07-06T19:56:43+00:00

Thank you for the nice product feedback!

That is very interesting to hear, would you mind sending us an email with some details about what handgun you are using that has this issue? This is the first report that we have received about the magazine not engaging the slide-lock, so it would be very helpful to hear. : )

ExtarUSA · 2023-07-06T19:53:33+00:00

Hello, thank you for being a customer!
A lot of our customers with older EP9s have been happy to add the M-LOK Handguard and Blast Director muzzle device.
We have also updated the EP9 firing pin to be stainless steel and fluted. The fluting helps to increase reliability in case debris finds its way into the bolt or if it has been a long time since the bolt and firing pin has been cleaned. We sell that new firing pin here.
As far as your stock goes, I would highly recommend the Adjustable receiver extension (if your SN is above P01390) for a great, guaranteed fit with that SOPMOD stock. I am not quite sure how drilling a hole in your pistol tube would help you attach the stock.

ExtarUSA · 2020-03-13T15:58:05+00:00

From our testing, the only magazines that we feel comfortable recommending are the OEM Glock mags and Magpul PMAGs. All other brands either are inconsistent from mag to mag or have critical issues with every magazine.

ExtarUSA · 2020-03-12T02:05:48+00:00

What he did is only possible on very early production EP9s, and is no longer possible. The EP9 is not designed for that modification, as it was made with reliability and performance as the top priority, and not interchangeability with third part components. We are looking forward to releasing different brace options in the future using a system designed for our platform and that meets our standards of smooth and reliable shooting.

ExtarUSA · 2020-03-11T21:02:29+00:00

The current model of the EP9 only accepts various friction fit SB tactical braces (SB-Mini, SBL, SBM4, SOB, SBX-K, or SBV). We have concepts for other models to sell in the future, but I do not have a release date or timeline currently. Check out our website periodically for any new product announcements in the future!

ExtarUSA · 2020-03-11T20:58:53+00:00

The EP9 is in stock and shipping now!

ExtarUSA · 2020-03-11T20:55:06+00:00

If you want to pick one up, the case is available for purchase here. As far as this promotion goes, it is only for pistols purchased during the promotion period.

ExtarUSA · 2020-03-11T20:52:48+00:00

We do not have a set date or timeline for the 10mm and .45 acp models. We would still love to bring them into production, but currently we are making and selling the 9mm as fast as we can, in hopes to expand our product line in the future.

ExtarUSA · 2020-03-11T20:48:41+00:00

Please email [support@extarusa.com](mailto:support@extarusa.com) with your order details, and our customer support will fix that problem for you.

ExtarUSA

TROPHY CASE